Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LM2596SX-ADJ

3D generated from the datasheet; KiCad's model does not fit this maker's body.

Texas Instruments · DC-DC Converters · TO-263-5

LM2596SX-ADJ from Texas Instruments, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 VIN power_in Unregulated DC input supply, 4.5 V to 40 V (45 V absolute max). Bypass with a low-ESR bulk capacitor (e.g. 680 µF) close to the pin to handle the switching current.
2 Output power_out Switching output from the internal power switch. Connects to the catch diode cathode and the input side of the output inductor. Drives up to 3 A at the switching frequency of 150 kHz.
3 Ground power_in Ground
4 Feedback input Feedback sense input for the internal error amplifier. Regulates the pin to VFB = 1.230 V (typ) via an external resistor divider from VOUT that sets the output voltage from 1.2 V to 37 V. Absolute range −0.3 V to +25 V; input bias current ~10 nA (50 nA max).
5 ON/OFF input Active-low TTL shutdown input. Pull LOW (<0.6 V) to enable regulation; drive HIGH (>2.0 V, up to 25 V) to place the device in standby (~80 µA typ, 250 µA max). Tie directly to GND if the shutdown function is unused.
6 GND power_in Package tab (pad 6). printed: Metal Tab GND (Figure 6-2).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TO-263-5
Category PMIC
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Feedback voltage (VOUT programmed for 3 V), TJ = 25°C VFB 1.193 1.23 1.267 V 4.5 V ≤ VIN ≤ 40 V, 0.2 A ≤ ILOAD ≤ 3 A, VOUT programmed for 3 V; TJ = 25°C 6
Feedback voltage (VOUT programmed for 3 V), -40°C to 125°C VFB 1.18 1.28 V 4.5 V ≤ VIN ≤ 40 V, 0.2 A ≤ ILOAD ≤ 3 A, VOUT programmed for 3 V; -40°C ≤ TJ ≤ 125°C 6
Feedback bias current, TJ = 25°C Ib 10 50 nA Adjustable version only, VFB = 1.3 V; TJ = 25°C 7
Feedback bias current, -40°C to 125°C Ib 100 nA Adjustable version only, VFB = 1.3 V; -40°C ≤ TJ ≤ 125°C 7
Oscillator frequency, TJ = 25°C fO 127 150 173 kHz TJ = 25°C 7
Oscillator frequency, -40°C to 125°C fO 110 173 kHz -40°C ≤ TJ ≤ 125°C 7
Saturation voltage, TJ = 25°C VSAT 1.16 1.4 V IOUT = 3 A; TJ = 25°C 7
Saturation voltage, -40°C to 125°C VSAT 1.5 V IOUT = 3 A; -40°C ≤ TJ ≤ 125°C 7
Max duty cycle (ON) DC 100 % See note (5) 7
Min duty cycle (OFF) DC 0 % See note (6) 7
Current limit (peak current), TJ = 25°C ICL 3.6 4.5 6.9 A Peak current; TJ = 25°C; see notes (4)(5) 7
Current limit (peak current), -40°C to 125°C ICL 3.4 7.5 A Peak current; -40°C ≤ TJ ≤ 125°C; see notes (4)(5) 7
Output leakage current IL 50 μA Output = 0 V, VIN = 40 V 7
Output leakage current IL 2 30 mA Output = -1 V 7
Operating quiescent current IQ 5 10 mA See note (6) 7
Standby quiescent current, TJ = 25°C ISTBY 80 200 μA ON/OFF pin = 5 V (OFF); TJ = 25°C 7
Standby quiescent current, -40°C to 125°C ISTBY 250 μA ON/OFF pin = 5 V (OFF); -40°C ≤ TJ ≤ 125°C 7
ON/OFF pin logic input threshold, Low (regulator ON), -40°C to 125°C VIH 0.6 V Low (regulator ON); -40°C ≤ TJ ≤ 125°C 7
ON/OFF pin logic input threshold, High (regulator OFF), -40°C to 125°C VIL 2 V High (regulator OFF); -40°C ≤ TJ ≤ 125°C 7
ON/OFF pin input current, regulator OFF IH 5 15 μA VLOGIC = 2.5 V (regulator OFF) 7
ON/OFF pin input current, regulator ON IL 0.02 5 μA VLOGIC = 0.5 V (regulator ON) 7
Supply voltage VIN 4.5 40 V 5
Operating free-air temperature TA -40 125 °C 5
Maximum supply voltage VIN 45 V 5
SD/SS pin input voltage 6 V Voltage internally clamped; if clamp voltage is exceeded, limit current to 1 mA max 5
Delay pin voltage 1.5 V Voltage internally clamped; if clamp voltage is exceeded, limit current to 1 mA max 5
Flag pin voltage -0.3 45 V 5
Feedback pin voltage -0.3 25 V 5
Output voltage to ground, steady-state -1 V Steady-state 5
Lead temperature, vapor phase (60 s), KTW package 215 °C KTW package, vapor phase (60 s) 5
Lead temperature, infrared (10 s), KTW package 245 °C KTW package, infrared (10 s) 5
Maximum junction temperature TJ 150 °C 5
Storage temperature Tstg -65 150 °C 5
Junction-to-ambient thermal resistance, TO-263 tab on single-sided PCB, 0.5 in² 1-oz copper RθJA 50 °C/W KTW (TO-263); note (5) 5
Junction-to-ambient thermal resistance, TO-263 tab on single-sided PCB, 2.5 in² 1-oz copper RθJA 30 °C/W KTW (TO-263); note (6) 6
Junction-to-case (top) thermal resistance RθJC(top) 2 °C/W KTW (TO-263) 5

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper circuitry, the PCB copper area connected to this pin must be kept to a minimum. 4

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: LM2596SX-ADJ
  • Footprint: Package_TO_SOT_SMD:TO-263-5_TabPin6
  • 3D model: TO-263-5, generated on the KiCad land (body 8.64 x 10.16 mm, terminals on the pads, 4.57 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: lm2596sx-adj-etched.step / lm2596sx-adj-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm2596sx-adj.step / lm2596sx-adj.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (47 pp, sha256 2eec90879908cf71, retrieved 2026-11-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF