main
History Download
Ray lm2596sx-3-3: specified limits as data (metadata.characteristics, 34 rows from the datasheet) ece7d90

LM2596SX-3.3

Texas Instruments · DC-DC Converters · TO-263-5

LM2596SX-3.3 from Texas Instruments, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Positive input power supply to the IC switch regulator with operating range 4.5V to 40V; input bypass capacitor required to minimize voltage transients and provide switching current.
2 Output output Internal switch output with voltage switching between approximately (+VIN − VSAT) and approximately −0.5V at duty cycle of VOUT/VIN; PCB copper area connected to this pin must be minimal to reduce coupling to sensitive circuits.
3 GND power_in Circuit ground reference.
4 Feedback input Feedback input pin that detects stable output voltage to complete feedback loop for output voltage regulation; typical feedback voltage 1.23V for adjustable version.
5 ON/OFF input Logic input to control regulator shutdown; pulling below approximately 1.3V threshold enables regulator operation, pulling above 1.3V up to 25V maximum disables regulator with standby quiescent current typically 80μA.
6 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TO-263-5
Category Power Management (PMIC)
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output voltage (3.3V version) VOUT 3.168 3.3 3.432 V 4.75V ≤ VIN ≤ 40V, 0.2A ≤ ILOAD ≤ 3A; TJ = 25°C 6
Output voltage (3.3V version) VOUT 3.135 3.465 V 4.75V ≤ VIN ≤ 40V, 0.2A ≤ ILOAD ≤ 3A; -40°C ≤ TJ ≤ 125°C 6
Oscillator frequency fO 127 150 173 kHz TJ = 25°C 7
Oscillator frequency fO 110 173 kHz -40°C ≤ TJ ≤ 125°C 7
Saturation voltage VSAT 1.16 1.4 V IOUT = 3A; TJ = 25°C 7
Saturation voltage VSAT 1.5 V IOUT = 3A; -40°C ≤ TJ ≤ 125°C 7
Current limit (peak current) ICL 3.6 4.5 6.9 A TJ = 25°C 7
Current limit (peak current) ICL 3.4 7.5 A -40°C ≤ TJ ≤ 125°C 7
Output leakage current IL 50 μA Output = 0V, VIN = 40V 7
Output leakage current IL 2 30 mA Output = -1V 7
Operating quiescent current IQ 5 10 mA 请参阅(6) 7
Standby quiescent current ISTBY 80 200 μA ON/OFF pin = 5V (off), (7); TJ = 25°C 7
Standby quiescent current ISTBY 250 μA ON/OFF pin = 5V (off), (7); -40°C ≤ TJ ≤ 125°C 7
ON/OFF pin logic input threshold, low (regulator on) VIH 1.3 V TJ = 25°C 7
ON/OFF pin logic input threshold, low (regulator on) VIH 0.6 V -40°C ≤ TJ ≤ 125°C 7
ON/OFF pin logic input threshold, high (regulator off) VIL 1.3 V TJ = 25°C 7
ON/OFF pin logic input threshold, high (regulator off) VIL 2 V -40°C ≤ TJ ≤ 125°C 7
ON/OFF pin input current (regulator off) IH 5 15 μA VLOGIC = 2.5V (regulator off) 7
ON/OFF pin input current (regulator on) IL 0.02 5 μA VLOGIC = 0.5V (regulator on) 7
Maximum supply voltage VIN 45 V 5
SD/SS pin input voltage 6 V Clamped internally; limit current to 1mA max beyond clamp voltage 5
Delay pin voltage 1.5 V 5
Flag pin voltage -0.3 45 V 5
Feedback pin voltage -0.3 25 V 5
Output voltage to ground, steady state -1 V Steady state 5
Lead temperature, vapor phase 215 °C KTW package, 60 s 5
Lead temperature, infrared 245 °C KTW package, 10 s 5
Maximum junction temperature 150 °C 5
Storage temperature Tstg -65 150 °C 5
Supply voltage 4.5 40 V 5
Operating temperature -40 125 °C 5
Junction-to-ambient thermal resistance (KTW) RθJA 50 °C/W TO-263, 1oz Cu 0.5in² on single-sided PCB (note 5) 5
Junction-to-ambient thermal resistance (KTW) RθJA 30 °C/W TO-263, 1oz Cu 2.5in² on single-sided PCB (note 6) 6
Junction-to-case (top) thermal resistance RθJC(top) 2 °C/W KTW package 5

CAD (KiCad official)

  • Symbol: LM2596SX-3.3
  • Footprint: Package_TO_SOT_SMD:TO-263-5_TabPin6
  • 3D model: TO-263-5 (KiCad packages3D, STEP)
  • 3D model files: lm2596sx-3-3-etched.step / lm2596sx-3-3-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm2596sx-3-3.step / lm2596sx-3-3.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (46 pp, sha256 db4b7ff7ba5182ab, retrieved 2026-09-23, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF