3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLM2596SX-3.3
Texas Instruments · DC-DC Converters · TO-263-5
LM2596SX-3.3 from Texas Instruments, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Positive input power supply to the IC switch regulator with operating range 4.5V to 40V; input bypass capacitor required to minimize voltage transients and provide switching current. |
| 2 | Output | output | Internal switch output with voltage switching between approximately (+VIN − VSAT) and approximately −0.5V at duty cycle of VOUT/VIN; PCB copper area connected to this pin must be minimal to reduce coupling to sensitive circuits. |
| 3 | GND | power_in | Circuit ground reference. |
| 4 | Feedback | input | Feedback input pin that detects stable output voltage to complete feedback loop for output voltage regulation; typical feedback voltage 1.23V for adjustable version. |
| 5 | ON/OFF | input | Logic input to control regulator shutdown; pulling below approximately 1.3V threshold enables regulator operation, pulling above 1.3V up to 25V maximum disables regulator with standby quiescent current typically 80μA. |
| 6 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TO-263-5 |
| Category | Power Management (PMIC) |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage (3.3V version) | VOUT | 3.168 | 3.3 | 3.432 | V | 4.75V ≤ VIN ≤ 40V, 0.2A ≤ ILOAD ≤ 3A; TJ = 25°C | 6 |
| Output voltage (3.3V version) | VOUT | 3.135 | 3.465 | V | 4.75V ≤ VIN ≤ 40V, 0.2A ≤ ILOAD ≤ 3A; -40°C ≤ TJ ≤ 125°C | 6 | |
| Oscillator frequency | fO | 127 | 150 | 173 | kHz | TJ = 25°C | 7 |
| Oscillator frequency | fO | 110 | 173 | kHz | -40°C ≤ TJ ≤ 125°C | 7 | |
| Saturation voltage | VSAT | 1.16 | 1.4 | V | IOUT = 3A; TJ = 25°C | 7 | |
| Saturation voltage | VSAT | 1.5 | V | IOUT = 3A; -40°C ≤ TJ ≤ 125°C | 7 | ||
| Current limit (peak current) | ICL | 3.6 | 4.5 | 6.9 | A | TJ = 25°C | 7 |
| Current limit (peak current) | ICL | 3.4 | 7.5 | A | -40°C ≤ TJ ≤ 125°C | 7 | |
| Output leakage current | IL | 50 | μA | Output = 0V, VIN = 40V | 7 | ||
| Output leakage current | IL | 2 | 30 | mA | Output = -1V | 7 | |
| Operating quiescent current | IQ | 5 | 10 | mA | 请参阅(6) | 7 | |
| Standby quiescent current | ISTBY | 80 | 200 | μA | ON/OFF pin = 5V (off), (7); TJ = 25°C | 7 | |
| Standby quiescent current | ISTBY | 250 | μA | ON/OFF pin = 5V (off), (7); -40°C ≤ TJ ≤ 125°C | 7 | ||
| ON/OFF pin logic input threshold, low (regulator on) | VIH | 1.3 | V | TJ = 25°C | 7 | ||
| ON/OFF pin logic input threshold, low (regulator on) | VIH | 0.6 | V | -40°C ≤ TJ ≤ 125°C | 7 | ||
| ON/OFF pin logic input threshold, high (regulator off) | VIL | 1.3 | V | TJ = 25°C | 7 | ||
| ON/OFF pin logic input threshold, high (regulator off) | VIL | 2 | V | -40°C ≤ TJ ≤ 125°C | 7 | ||
| ON/OFF pin input current (regulator off) | IH | 5 | 15 | μA | VLOGIC = 2.5V (regulator off) | 7 | |
| ON/OFF pin input current (regulator on) | IL | 0.02 | 5 | μA | VLOGIC = 0.5V (regulator on) | 7 | |
| Maximum supply voltage | VIN | 45 | V | 5 | |||
| SD/SS pin input voltage | 6 | V | Clamped internally; limit current to 1mA max beyond clamp voltage | 5 | |||
| Delay pin voltage | 1.5 | V | 5 | ||||
| Flag pin voltage | -0.3 | 45 | V | 5 | |||
| Feedback pin voltage | -0.3 | 25 | V | 5 | |||
| Output voltage to ground, steady state | -1 | V | Steady state | 5 | |||
| Lead temperature, vapor phase | 215 | °C | KTW package, 60 s | 5 | |||
| Lead temperature, infrared | 245 | °C | KTW package, 10 s | 5 | |||
| Maximum junction temperature | 150 | °C | 5 | ||||
| Storage temperature | Tstg | -65 | 150 | °C | 5 | ||
| Supply voltage | 4.5 | 40 | V | 5 | |||
| Operating temperature | -40 | 125 | °C | 5 | |||
| Junction-to-ambient thermal resistance (KTW) | RθJA | 50 | °C/W | TO-263, 1oz Cu 0.5in² on single-sided PCB (note 5) | 5 | ||
| Junction-to-ambient thermal resistance (KTW) | RθJA | 30 | °C/W | TO-263, 1oz Cu 2.5in² on single-sided PCB (note 6) | 6 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 2 | °C/W | KTW package | 5 |
CAD (KiCad official)
- Symbol:
LM2596SX-3.3 - Footprint:
Package_TO_SOT_SMD:TO-263-5_TabPin6 - 3D model: TO-263-5 (KiCad packages3D, STEP)
- 3D model files:
lm2596sx-3-3-etched.step/lm2596sx-3-3-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm2596sx-3-3.step/lm2596sx-3-3.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (46 pp, sha256
db4b7ff7ba5182ab, retrieved 2026-09-23, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).