main
Ray
Initial commit: component/lm2596sx-12
9979871
LM2596SX-12
Texas Instruments · DC-DC Converters · TO-263-5
LM2596SX-12 from Texas Instruments, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Positive input power supply for the IC switching regulator; a suitable input bypass capacitor must be placed on this pin to minimize voltage transients and provide the switching current needed by the regulator. |
| 2 | OUTPUT | output | Internal switch output that switches between approximately (+VIN − VSAT) and approximately −0.5V with duty cycle VOUT/VIN; PCB copper area connected to this pin must be minimized to reduce coupling with sensitive circuits. |
| 3 | GND | power_in | Circuit ground connection. |
| 4 | FEEDBACK | input | Feedback input that senses the output voltage to complete the feedback loop. |
| 5 | ON/OFF | input | Logic control input allowing shutdown of the switching regulator; pulling below approximately 1.3V turns on the regulator, pulling to 1.3V or above (maximum 25V) shuts it down, reducing input current to approximately 80μA. |
| 6 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TO-263-5 |
| Category | Power Management (PMIC) |
| Pins | 6 |
CAD (KiCad official)
- Symbol:
LM2596SX-12 - Footprint:
Package_TO_SOT_SMD:TO-263-5_TabPin6 - 3D model: TO-263-5 (KiCad packages3D, STEP)
- 3D model files:
lm2596sx-12-etched.step/lm2596sx-12-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm2596sx-12.step/lm2596sx-12.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (46 pp, sha256
db4b7ff7ba5182ab, retrieved 2026-09-23, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LM2596SX-12
**Texas Instruments** · DC-DC Converters · TO-263-5
LM2596SX-12 from Texas Instruments, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Positive input power supply for the IC switching regulator; a suitable input bypass capacitor must be placed on this pin to minimize voltage transients and provide the switching current needed by the regulator. |
| 2 | OUTPUT | output | Internal switch output that switches between approximately (+VIN − VSAT) and approximately −0.5V with duty cycle VOUT/VIN; PCB copper area connected to this pin must be minimized to reduce coupling with sensitive circuits. |
| 3 | GND | power_in | Circuit ground connection. |
| 4 | FEEDBACK | input | Feedback input that senses the output voltage to complete the feedback loop. |
| 5 | ON/OFF | input | Logic control input allowing shutdown of the switching regulator; pulling below approximately 1.3V turns on the regulator, pulling to 1.3V or above (maximum 25V) shuts it down, reducing input current to approximately 80μA. |
| 6 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TO-263-5 |
| Category | Power Management (PMIC) |
| Pins | 6 |
## CAD (KiCad official)
- Symbol: `LM2596SX-12`
- Footprint: `Package_TO_SOT_SMD:TO-263-5_TabPin6`
- 3D model: TO-263-5 (KiCad packages3D, STEP)
- 3D model files: `lm2596sx-12-etched.step` / `lm2596sx-12-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm2596sx-12.step` / `lm2596sx-12.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lm2596) (46 pp, sha256 `db4b7ff7ba5182ab`, retrieved 2026-09-23, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lm2596sx-12-datasheet.pdf)