main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs lm2596sx-12: etch along the lead row, tab up; full MPN text (service-occt 1.9.3) (service-occt 1.6.0, from the plain ST… · Ray
viewers lm2596sx-12: viewers · Ray
lm2596sx-12-etched.fit.json lm2596sx-12: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lm2596sx-12-etched.glb lm2596sx-12: etch along the lead row, tab up; full MPN text (service-occt 1.9.3) (service-occt 1.6.0, from the plain ST… · Ray
lm2596sx-12-etched.step lm2596sx-12: etch along the lead row, tab up; full MPN text (service-occt 1.9.3) (service-occt 1.6.0, from the plain ST… · Ray
lm2596sx-12-hero.glb lm2596sx-12: hero from the plain model · Ray
lm2596sx-12-hero.overlay.json lm2596sx-12: hero from the plain model · Ray
lm2596sx-12.glb Publish 0.1.0 · Ray
lm2596sx-12.kicad_mod Publish 0.1.0 · Ray
lm2596sx-12.kicad_sym Publish 0.1.0 · Ray
lm2596sx-12.lbr Publish 0.1.0 · Ray
lm2596sx-12.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Initial commit: component/lm2596sx-12 · Ray

LM2596SX-12

Texas Instruments · DC-DC Converters · TO-263-5

LM2596SX-12 from Texas Instruments, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Positive input power supply for the IC switching regulator; a suitable input bypass capacitor must be placed on this pin to minimize voltage transients and provide the switching current needed by the regulator.
2 OUTPUT output Internal switch output that switches between approximately (+VIN − VSAT) and approximately −0.5V with duty cycle VOUT/VIN; PCB copper area connected to this pin must be minimized to reduce coupling with sensitive circuits.
3 GND power_in Circuit ground connection.
4 FEEDBACK input Feedback input that senses the output voltage to complete the feedback loop.
5 ON/OFF input Logic control input allowing shutdown of the switching regulator; pulling below approximately 1.3V turns on the regulator, pulling to 1.3V or above (maximum 25V) shuts it down, reducing input current to approximately 80μA.
6 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TO-263-5
Category Power Management (PMIC)
Pins 6

CAD (KiCad official)

  • Symbol: LM2596SX-12
  • Footprint: Package_TO_SOT_SMD:TO-263-5_TabPin6
  • 3D model: TO-263-5 (KiCad packages3D, STEP)
  • 3D model files: lm2596sx-12-etched.step / lm2596sx-12-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm2596sx-12.step / lm2596sx-12.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (46 pp, sha256 db4b7ff7ba5182ab, retrieved 2026-09-23, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF