main
Ray Publish 0.1.0 10e5021

LM2596S-3.3-MS

MSKSEMI · DC-DC Converters · TO-263-5

LM2596S-3.3-MS from MSKSEMI, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Vin power_in Positive input supply for the switching regulator, rated up to 40V for LM2596 (57V for LM2596HV), and requires a low-ESR bypass capacitor placed close to the pin.
2 Output output Internal switch output that swings between (+VIN − VSAT) and approximately −0.5V, so its PCB copper area should be kept to a minimum to limit coupling to sensitive circuitry.
3 Gnd power_in Circuit ground for the regulator, which must be connected to the input capacitor return and the output capacitor return through a low-impedance ground path.
4 Feedback input Senses the regulated output voltage to close the feedback loop, with an absolute maximum pin voltage of −0.3V to +25V.
5 ON/OFF input Shutdown input that is active low or floating, turning the regulator on below approximately 1.3V and shutting it off above 1.3V, with a maximum pin voltage of +25V.
6 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer MSKSEMI
Package TO-263-5
Category Power Management
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage (25°C) VOUT 3.168 3.3 3.432 V Standard type face (TJ = 25°C); 4.75V ≤ VIN ≤ 40V, 0.2A ≤ ILOAD ≤ 3A 4
Output Voltage (full operating temperature range) VOUT 3.135 3.465 V Boldface, full operating temperature range; 4.75V ≤ VIN ≤ 40V, 0.2A ≤ ILOAD ≤ 3A 4
Oscillator Frequency (25°C) fO 127 150 173 kHz Standard type face (TJ = 25°C); Note 6 5
Oscillator Frequency (full operating temperature range) fO 110 173 kHz Boldface, full operating temperature range; Note 6 5
Saturation Voltage (25°C) VSAT 1.16 1.4 V Standard type face (TJ = 25°C); IOUT = 3A (Notes 7, 8) 5
Saturation Voltage (full operating temperature range) VSAT 1.5 V Boldface, full operating temperature range; IOUT = 3A (Notes 7, 8) 5
Current Limit Peak Current (25°C) ICL 3.6 4.5 6.9 A Standard type face (TJ = 25°C); Notes 7, 8 5
Current Limit Peak Current (full operating temperature range) ICL 3.4 7.5 A Boldface, full operating temperature range; Notes 7, 8 5
Output Leakage Current IL 50 µA Output = 0V (Notes 7, 9) 5
Output Leakage Current IL 2 30 mA Output = −1V (Note 10) 5
Quiescent Current IQ 5 10 mA Note 9 5
Standby Quiescent Current (25°C) ISTBY 80 200 µA Standard type face (TJ = 25°C); ON/OFF pin = 5V (OFF) (Note 10) 5
Standby Quiescent Current (full operating temperature range) ISTBY 250 µA Boldface, full operating temperature range; ON/OFF pin = 5V (OFF) (Note 10) 5
ON/OFF Pin Threshold Voltage Low (Regulator ON) VIH 1.3 0.6 V Test Circuit Figure 1 5
ON/OFF Pin Logic Input High (Regulator OFF) VIL 2 V Test Circuit Figure 1 5
ON/OFF Pin Input Current (Regulator OFF) IH 5 15 µA VLOGIC = 2.5V (Regulator OFF) 6
ON/OFF Pin Input Current (Regulator ON) IL 0.02 5 µA VLOGIC = 0.5V (Regulator ON) 6
Maximum Supply Voltage (LM2596) 45 V LM2596 (non-HV) column 3
Output Voltage to Ground (Steady State) -1 V Steady state 3
ON/OFF Pin Input Voltage -0.3 25 V 3
Feedback Pin Voltage -0.3 25 V 3
ESD Susceptibility Human Body Model 2 kV Human Body Model 3
Storage Temperature Range -65 150 °C 3
Maximum Junction Temperature 150 °C 3
Vapor Phase Soldering 215 °C 60 sec. 3
Infrared Soldering 245 °C 10 sec. 3
T Package Soldering 260 °C 10 sec. 3
Supply Voltage (LM2596) 40 V LM2596 (non-HV) column 3
Operating Junction Temperature Range TJ -40 125 °C 3
Thermal Resistance, Junction to Case JC 2 °C/W TO-220 or TO-263 package 5
Thermal Resistance, Junction to Ambient (TO-263, Note 12) JA 50 °C/W TO-263 package tab soldered to single PCB with 0.5 in² of 1 oz. copper area 5
Thermal Resistance, Junction to Ambient (TO-263, Note 13) JA 30 °C/W TO-263 package tab soldered to single-sided PCB with 2.5 in² of 1 oz. copper area 5
Thermal Resistance, Junction to Ambient (TO-263, Note 14) JA 20 °C/W TO-263 package tab soldered to double-sided PCB with 3 in² copper on regulator side and approx. 16 in² on other side 5

CAD (KiCad official)

  • Symbol: LM2596S-3.3-MS
  • Footprint: Package_TO_SOT_SMD:TO-263-5_TabPin6
  • 3D model: TO-263-5 (KiCad packages3D, STEP)
  • 3D model files: lm2596s-3-3-ms-etched.step / lm2596s-3-3-ms-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm2596s-3-3-ms.step / lm2596s-3-3-ms.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: MSKSEMI datasheet (19 pp, sha256 0157580195f9795e, retrieved 2026-11-05, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF