3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLM2596S-3.3-MS
MSKSEMI · DC-DC Converters · TO-263-5
LM2596S-3.3-MS from MSKSEMI, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Vin | power_in | Positive input supply for the switching regulator, rated up to 40V for LM2596 (57V for LM2596HV), and requires a low-ESR bypass capacitor placed close to the pin. |
| 2 | Output | output | Internal switch output that swings between (+VIN − VSAT) and approximately −0.5V, so its PCB copper area should be kept to a minimum to limit coupling to sensitive circuitry. |
| 3 | Gnd | power_in | Circuit ground for the regulator, which must be connected to the input capacitor return and the output capacitor return through a low-impedance ground path. |
| 4 | Feedback | input | Senses the regulated output voltage to close the feedback loop, with an absolute maximum pin voltage of −0.3V to +25V. |
| 5 | ON/OFF | input | Shutdown input that is active low or floating, turning the regulator on below approximately 1.3V and shutting it off above 1.3V, with a maximum pin voltage of +25V. |
| 6 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MSKSEMI |
| Package | TO-263-5 |
| Category | Power Management |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage (25°C) | VOUT | 3.168 | 3.3 | 3.432 | V | Standard type face (TJ = 25°C); 4.75V ≤ VIN ≤ 40V, 0.2A ≤ ILOAD ≤ 3A | 4 |
| Output Voltage (full operating temperature range) | VOUT | 3.135 | 3.465 | V | Boldface, full operating temperature range; 4.75V ≤ VIN ≤ 40V, 0.2A ≤ ILOAD ≤ 3A | 4 | |
| Oscillator Frequency (25°C) | fO | 127 | 150 | 173 | kHz | Standard type face (TJ = 25°C); Note 6 | 5 |
| Oscillator Frequency (full operating temperature range) | fO | 110 | 173 | kHz | Boldface, full operating temperature range; Note 6 | 5 | |
| Saturation Voltage (25°C) | VSAT | 1.16 | 1.4 | V | Standard type face (TJ = 25°C); IOUT = 3A (Notes 7, 8) | 5 | |
| Saturation Voltage (full operating temperature range) | VSAT | 1.5 | V | Boldface, full operating temperature range; IOUT = 3A (Notes 7, 8) | 5 | ||
| Current Limit Peak Current (25°C) | ICL | 3.6 | 4.5 | 6.9 | A | Standard type face (TJ = 25°C); Notes 7, 8 | 5 |
| Current Limit Peak Current (full operating temperature range) | ICL | 3.4 | 7.5 | A | Boldface, full operating temperature range; Notes 7, 8 | 5 | |
| Output Leakage Current | IL | 50 | µA | Output = 0V (Notes 7, 9) | 5 | ||
| Output Leakage Current | IL | 2 | 30 | mA | Output = −1V (Note 10) | 5 | |
| Quiescent Current | IQ | 5 | 10 | mA | Note 9 | 5 | |
| Standby Quiescent Current (25°C) | ISTBY | 80 | 200 | µA | Standard type face (TJ = 25°C); ON/OFF pin = 5V (OFF) (Note 10) | 5 | |
| Standby Quiescent Current (full operating temperature range) | ISTBY | 250 | µA | Boldface, full operating temperature range; ON/OFF pin = 5V (OFF) (Note 10) | 5 | ||
| ON/OFF Pin Threshold Voltage Low (Regulator ON) | VIH | 1.3 | 0.6 | V | Test Circuit Figure 1 | 5 | |
| ON/OFF Pin Logic Input High (Regulator OFF) | VIL | 2 | V | Test Circuit Figure 1 | 5 | ||
| ON/OFF Pin Input Current (Regulator OFF) | IH | 5 | 15 | µA | VLOGIC = 2.5V (Regulator OFF) | 6 | |
| ON/OFF Pin Input Current (Regulator ON) | IL | 0.02 | 5 | µA | VLOGIC = 0.5V (Regulator ON) | 6 | |
| Maximum Supply Voltage (LM2596) | 45 | V | LM2596 (non-HV) column | 3 | |||
| Output Voltage to Ground (Steady State) | -1 | V | Steady state | 3 | |||
| ON/OFF Pin Input Voltage | -0.3 | 25 | V | 3 | |||
| Feedback Pin Voltage | -0.3 | 25 | V | 3 | |||
| ESD Susceptibility Human Body Model | 2 | kV | Human Body Model | 3 | |||
| Storage Temperature Range | -65 | 150 | °C | 3 | |||
| Maximum Junction Temperature | 150 | °C | 3 | ||||
| Vapor Phase Soldering | 215 | °C | 60 sec. | 3 | |||
| Infrared Soldering | 245 | °C | 10 sec. | 3 | |||
| T Package Soldering | 260 | °C | 10 sec. | 3 | |||
| Supply Voltage (LM2596) | 40 | V | LM2596 (non-HV) column | 3 | |||
| Operating Junction Temperature Range | TJ | -40 | 125 | °C | 3 | ||
| Thermal Resistance, Junction to Case | JC | 2 | °C/W | TO-220 or TO-263 package | 5 | ||
| Thermal Resistance, Junction to Ambient (TO-263, Note 12) | JA | 50 | °C/W | TO-263 package tab soldered to single PCB with 0.5 in² of 1 oz. copper area | 5 | ||
| Thermal Resistance, Junction to Ambient (TO-263, Note 13) | JA | 30 | °C/W | TO-263 package tab soldered to single-sided PCB with 2.5 in² of 1 oz. copper area | 5 | ||
| Thermal Resistance, Junction to Ambient (TO-263, Note 14) | JA | 20 | °C/W | TO-263 package tab soldered to double-sided PCB with 3 in² copper on regulator side and approx. 16 in² on other side | 5 |
CAD (KiCad official)
- Symbol:
LM2596S-3.3-MS - Footprint:
Package_TO_SOT_SMD:TO-263-5_TabPin6 - 3D model: TO-263-5 (KiCad packages3D, STEP)
- 3D model files:
lm2596s-3-3-ms-etched.step/lm2596s-3-3-ms-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm2596s-3-3-ms.step/lm2596s-3-3-ms.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MSKSEMI datasheet (19 pp, sha256
0157580195f9795e, retrieved 2026-11-05, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).