main
Download ZIP Propose a change
Generated by adom_assets · KiCad file format 20240108
Name Last commit message Last updated
docs lm258ypt: rebuilt as a full factory component page (was a placeholder) · Ray
viewers lm258ypt: viewers · Ray
lm258ypt-etched.glb lm258ypt: rebuilt as a full factory component page (was a placeholder) · Ray
lm258ypt-etched.step lm258ypt: rebuilt as a full factory component page (was a placeholder) · Ray
lm258ypt-hero.glb Publish 0.2.0 · Ray
lm258ypt-hero.overlay.json Publish 0.2.0 · Ray
lm258ypt.glb Publish 0.2.0 · Ray
lm258ypt.kicad_mod Publish 0.2.0 · Ray
lm258ypt.kicad_sym Publish 0.1.0 · Ray
lm258ypt.lbr Publish 0.2.0 · Ray
lm258ypt.step Publish 0.2.0 · Ray
package.json Publish 0.2.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.2.0 · Ray

LM258YPT

STMicroelectronics · Operational Amplifier · TSSOP-8 (ST TSSOP8)

LM258YPT from STMicroelectronics, in a TSSOP-8 (ST TSSOP8). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.

Pinout

Pin Name Type Function
1 Out1 output Output of amplifier 1, which can swing from 0 V to (VCC+ - 1.5 V) with a maximum output current of about 40 mA.
2 In1- input Inverting input of amplifier 1, with a common-mode range of (VCC-) to (VCC+ - 1.5 V) at 25 °C.
3 In1+ input Non-inverting input of amplifier 1, with a common-mode range of (VCC-) to (VCC+ - 1.5 V) at 25 °C.
4 Vcc- power_in Negative supply, or ground in single-supply operation.
5 In2+ input Non-inverting input of amplifier 2, with a common-mode range of (VCC-) to (VCC+ - 1.5 V) at 25 °C.
6 In2- input Inverting input of amplifier 2, with a common-mode range of (VCC-) to (VCC+ - 1.5 V) at 25 °C.
7 Out2 output Output of amplifier 2, which can swing from 0 V to (VCC+ - 1.5 V) with a maximum output current of about 40 mA.
8 Vcc+ power_in Positive supply, with an operating range of 3 to 30 V.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package TSSOP-8 (ST TSSOP8)
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input offset voltage Vio 5 mV VCC+=5 V, VCC-=GND, Vo=1.4 V, Tamb=25 °C (LM158, LM258 column) 7
Input offset voltage over temperature Vio 7 mV Tmin ≤ Tamb ≤ Tmax (LM158, LM258 column) 7
Input offset voltage drift ΔVio/ΔT 7 30 µV/°C LM158, LM258, LM358 column 7
Input offset current Iio 2 30 nA LM158, LM258, LM358 column, Tamb=25 °C 7
Input offset current over temperature Iio 40 nA Tmin ≤ Tamb ≤ Tmax (LM158, LM258, LM358 column) 7
Input offset current drift ΔIio/ΔT 10 300 pA/°C LM158, LM258, LM358 column 7
Input bias current Iib 20 150 nA LM158, LM258, LM358 column, Tamb=25 °C 7
Input bias current over temperature Iib 200 nA Tmin ≤ Tamb ≤ Tmax (LM158, LM258, LM358 column) 7
Large signal voltage gain Avd 50 100 V/mV VCC+=15 V, RL=2 kΩ, Vo=1.4 V to 11.4 V 7
Large signal voltage gain over temperature Avd 25 V/mV Tmin ≤ Tamb ≤ Tmax 7
Supply voltage rejection ratio SVR 65 100 dB VCC+=5 V to 30 V, Rs≤10 kΩ 7
Supply voltage rejection ratio over temperature SVR 65 dB Tmin ≤ Tamb ≤ Tmax 7
Supply current, all amp, no load ICC 0.7 1.2 mA Tmin ≤ Tamb ≤ Tmax, VCC+=5 V 7
Supply current, all amp, no load ICC 2 mA Tmin ≤ Tamb ≤ Tmax, VCC+=30 V 7
Common mode rejection ratio CMR 70 85 dB Rs≤10 kΩ 7
Common mode rejection ratio over temperature CMR 60 dB Tmin ≤ Tamb ≤ Tmax 7
Output current source Isource 20 40 60 mA VCC+=15 V, Vo=2 V, Vid=1 V 7
Output sink current Isink 10 20 mA VCC+=15 V, Vo=2 V, Vid=-1 V 7
Output sink current Isink 12 50 µA VCC+=15 V, Vo=0.2 V, Vid=-1 V 7
High level output voltage VOH 26 27 V VCC+=30 V, RL=2 kΩ to VCC-, Tamb=25 °C 8
High level output voltage over temperature VOH 26 V VCC+=30 V, RL=2 kΩ to VCC-, Tmin ≤ Tamb ≤ Tmax 8
High level output voltage VOH 27 28 V VCC+=30 V, RL=10 kΩ to VCC-, Tamb=25 °C 8
High level output voltage over temperature VOH 27 V VCC+=30 V, RL=10 kΩ to VCC-, Tmin ≤ Tamb ≤ Tmax 8
High level output voltage VOH 3.5 V VCC+=5 V, RL=2 kΩ to VCC-, Tamb=25 °C 8
High level output voltage over temperature VOH 3 V VCC+=5 V, RL=2 kΩ to VCC-, Tmin ≤ Tamb ≤ Tmax 8
Low level output voltage VOL 5 20 mV RL=10 kΩ connected to VCC- 8
Low level output voltage over temperature VOL 20 mV Tmin ≤ Tamb ≤ Tmax 8
Slew rate SR 0.3 0.6 V/µs VCC+=15 V, Vi=0.5 to 3 V, RL=2 kΩ, CL=100 pF, unity gain 8
Gain bandwidth product GBP 0.7 1.1 MHz VCC+=30 V, f=100 kHz, Vin=10 mV, RL=2 kΩ, CL=100 pF 8
Channel separation Vo1/Vo2 120 dB 1 kHz ≤ f ≤ 20 kHz 8
Total harmonic distortion THD 0.02 % f=1 kHz, Av=20 dB, RL=2 kΩ, Vo=2 Vpp, CL=100 pF 8
Supply voltage VCC 3 30 V 6
Operating free air temperature range (LM258) Toper -40 105 °C LM258 grade 6
Supply voltage VCC 32 V Printed as ±16 or 32 V for all LM158/LM258/LM358 grades 5
Input voltage Vi -0.3 32 V 5
Differential input voltage Vid -32 32 V 5
Input current Iin 5 mA DC 5
Input current Iin 50 mA AC, duty cycle = 10 %, T = 1 s 5
Operating free-air temperature range (LM258) Toper -40 105 °C LM258 grade 5
Storage temperature range Tstg -65 150 °C 5
Maximum junction temperature Tj 150 °C 5
ESD human body model HBM 300 V 100 pF through 1.5 kΩ 5
ESD machine model MM 200 V 200 pF, no series resistor 5
ESD charged device model CDM 1.5 kV 5
Thermal resistance junction to ambient, TSSOP8 Rthja 120 °C/W TSSOP8 package; typical value 5
Thermal resistance junction to case, TSSOP8 Rthjc 37 °C/W TSSOP8 package; typical value 5

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing Abs Updated: related products on the cover page. Updated: Section 3: "Absolute maximum ratings", Table 2: 24

CAD (Adom-generated)

  • Symbol: LM258YPT
  • Footprint: Adom_Gen:STMicroelectronics_TSSOP8
  • 3D model: generated to fit the land (STEP)
  • 3D model files: lm258ypt-etched.step / lm258ypt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm258ypt.step / lm258ypt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet, copy hosted by JLCPCB (25 pp, sha256 40a2550bed90848d, retrieved 2026-11-21)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land. Land: Its own sheet (sha 40a2550bed90) prints no TSSOP8 land; ST's printed TSSOP8 land, M24512 DS6520 Rev 31 p.32 Figure 18 (TSSOP8 - Recommended footprint): 1.0 x 0.35 mm pads, pitch 0.65, 7.0 outer, rows 6.0 c-c. Same package: this part's own outline on record (LM258YPT-dims.extracted.json, TSSOP8 p.21): body (2.9, 3.1) x (4.3, 4.5), lead span (6.2, 6.6), pitch 0.65 = ST TSSOP8 (D 2.9/3.0/3.1, E1 4.3/4.4/4.5, E 6.2/6.4/6.6, e 0.65). Shared land Adom_Gen:STMicroelectronics_TSSOP8. Task master ruling 2026-11-21 (ST TSSOP8).

Datasheet PDF