3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownLM258YPT
STMicroelectronics · Operational Amplifier · TSSOP-8 (ST TSSOP8)
LM258YPT from STMicroelectronics, in a TSSOP-8 (ST TSSOP8). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Out1 | output | Output of amplifier 1, which can swing from 0 V to (VCC+ - 1.5 V) with a maximum output current of about 40 mA. |
| 2 | In1- | input | Inverting input of amplifier 1, with a common-mode range of (VCC-) to (VCC+ - 1.5 V) at 25 °C. |
| 3 | In1+ | input | Non-inverting input of amplifier 1, with a common-mode range of (VCC-) to (VCC+ - 1.5 V) at 25 °C. |
| 4 | Vcc- | power_in | Negative supply, or ground in single-supply operation. |
| 5 | In2+ | input | Non-inverting input of amplifier 2, with a common-mode range of (VCC-) to (VCC+ - 1.5 V) at 25 °C. |
| 6 | In2- | input | Inverting input of amplifier 2, with a common-mode range of (VCC-) to (VCC+ - 1.5 V) at 25 °C. |
| 7 | Out2 | output | Output of amplifier 2, which can swing from 0 V to (VCC+ - 1.5 V) with a maximum output current of about 40 mA. |
| 8 | Vcc+ | power_in | Positive supply, with an operating range of 3 to 30 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | TSSOP-8 (ST TSSOP8) |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | Vio | 5 | mV | VCC+=5 V, VCC-=GND, Vo=1.4 V, Tamb=25 °C (LM158, LM258 column) | 7 | ||
| Input offset voltage over temperature | Vio | 7 | mV | Tmin ≤ Tamb ≤ Tmax (LM158, LM258 column) | 7 | ||
| Input offset voltage drift | ΔVio/ΔT | 7 | 30 | µV/°C | LM158, LM258, LM358 column | 7 | |
| Input offset current | Iio | 2 | 30 | nA | LM158, LM258, LM358 column, Tamb=25 °C | 7 | |
| Input offset current over temperature | Iio | 40 | nA | Tmin ≤ Tamb ≤ Tmax (LM158, LM258, LM358 column) | 7 | ||
| Input offset current drift | ΔIio/ΔT | 10 | 300 | pA/°C | LM158, LM258, LM358 column | 7 | |
| Input bias current | Iib | 20 | 150 | nA | LM158, LM258, LM358 column, Tamb=25 °C | 7 | |
| Input bias current over temperature | Iib | 200 | nA | Tmin ≤ Tamb ≤ Tmax (LM158, LM258, LM358 column) | 7 | ||
| Large signal voltage gain | Avd | 50 | 100 | V/mV | VCC+=15 V, RL=2 kΩ, Vo=1.4 V to 11.4 V | 7 | |
| Large signal voltage gain over temperature | Avd | 25 | V/mV | Tmin ≤ Tamb ≤ Tmax | 7 | ||
| Supply voltage rejection ratio | SVR | 65 | 100 | dB | VCC+=5 V to 30 V, Rs≤10 kΩ | 7 | |
| Supply voltage rejection ratio over temperature | SVR | 65 | dB | Tmin ≤ Tamb ≤ Tmax | 7 | ||
| Supply current, all amp, no load | ICC | 0.7 | 1.2 | mA | Tmin ≤ Tamb ≤ Tmax, VCC+=5 V | 7 | |
| Supply current, all amp, no load | ICC | 2 | mA | Tmin ≤ Tamb ≤ Tmax, VCC+=30 V | 7 | ||
| Common mode rejection ratio | CMR | 70 | 85 | dB | Rs≤10 kΩ | 7 | |
| Common mode rejection ratio over temperature | CMR | 60 | dB | Tmin ≤ Tamb ≤ Tmax | 7 | ||
| Output current source | Isource | 20 | 40 | 60 | mA | VCC+=15 V, Vo=2 V, Vid=1 V | 7 |
| Output sink current | Isink | 10 | 20 | mA | VCC+=15 V, Vo=2 V, Vid=-1 V | 7 | |
| Output sink current | Isink | 12 | 50 | µA | VCC+=15 V, Vo=0.2 V, Vid=-1 V | 7 | |
| High level output voltage | VOH | 26 | 27 | V | VCC+=30 V, RL=2 kΩ to VCC-, Tamb=25 °C | 8 | |
| High level output voltage over temperature | VOH | 26 | V | VCC+=30 V, RL=2 kΩ to VCC-, Tmin ≤ Tamb ≤ Tmax | 8 | ||
| High level output voltage | VOH | 27 | 28 | V | VCC+=30 V, RL=10 kΩ to VCC-, Tamb=25 °C | 8 | |
| High level output voltage over temperature | VOH | 27 | V | VCC+=30 V, RL=10 kΩ to VCC-, Tmin ≤ Tamb ≤ Tmax | 8 | ||
| High level output voltage | VOH | 3.5 | V | VCC+=5 V, RL=2 kΩ to VCC-, Tamb=25 °C | 8 | ||
| High level output voltage over temperature | VOH | 3 | V | VCC+=5 V, RL=2 kΩ to VCC-, Tmin ≤ Tamb ≤ Tmax | 8 | ||
| Low level output voltage | VOL | 5 | 20 | mV | RL=10 kΩ connected to VCC- | 8 | |
| Low level output voltage over temperature | VOL | 20 | mV | Tmin ≤ Tamb ≤ Tmax | 8 | ||
| Slew rate | SR | 0.3 | 0.6 | V/µs | VCC+=15 V, Vi=0.5 to 3 V, RL=2 kΩ, CL=100 pF, unity gain | 8 | |
| Gain bandwidth product | GBP | 0.7 | 1.1 | MHz | VCC+=30 V, f=100 kHz, Vin=10 mV, RL=2 kΩ, CL=100 pF | 8 | |
| Channel separation | Vo1/Vo2 | 120 | dB | 1 kHz ≤ f ≤ 20 kHz | 8 | ||
| Total harmonic distortion | THD | 0.02 | % | f=1 kHz, Av=20 dB, RL=2 kΩ, Vo=2 Vpp, CL=100 pF | 8 | ||
| Supply voltage | VCC | 3 | 30 | V | 6 | ||
| Operating free air temperature range (LM258) | Toper | -40 | 105 | °C | LM258 grade | 6 | |
| Supply voltage | VCC | 32 | V | Printed as ±16 or 32 V for all LM158/LM258/LM358 grades | 5 | ||
| Input voltage | Vi | -0.3 | 32 | V | 5 | ||
| Differential input voltage | Vid | -32 | 32 | V | 5 | ||
| Input current | Iin | 5 | mA | DC | 5 | ||
| Input current | Iin | 50 | mA | AC, duty cycle = 10 %, T = 1 s | 5 | ||
| Operating free-air temperature range (LM258) | Toper | -40 | 105 | °C | LM258 grade | 5 | |
| Storage temperature range | Tstg | -65 | 150 | °C | 5 | ||
| Maximum junction temperature | Tj | 150 | °C | 5 | |||
| ESD human body model | HBM | 300 | V | 100 pF through 1.5 kΩ | 5 | ||
| ESD machine model | MM | 200 | V | 200 pF, no series resistor | 5 | ||
| ESD charged device model | CDM | 1.5 | kV | 5 | |||
| Thermal resistance junction to ambient, TSSOP8 | Rthja | 120 | °C/W | TSSOP8 package; typical value | 5 | ||
| Thermal resistance junction to case, TSSOP8 | Rthjc | 37 | °C/W | TSSOP8 package; typical value | 5 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | Abs | Updated: related products on the cover page. Updated: Section 3: "Absolute maximum ratings", Table 2: | 24 |
CAD (Adom-generated)
- Symbol:
LM258YPT - Footprint:
Adom_Gen:STMicroelectronics_TSSOP8 - 3D model: generated to fit the land (STEP)
- 3D model files:
lm258ypt-etched.step/lm258ypt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm258ypt.step/lm258ypt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet, copy hosted by JLCPCB (25 pp, sha256
40a2550bed90848d, retrieved 2026-11-21) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land. Land: Its own sheet (sha 40a2550bed90) prints no TSSOP8 land; ST's printed TSSOP8 land, M24512 DS6520 Rev 31 p.32 Figure 18 (TSSOP8 - Recommended footprint): 1.0 x 0.35 mm pads, pitch 0.65, 7.0 outer, rows 6.0 c-c. Same package: this part's own outline on record (LM258YPT-dims.extracted.json, TSSOP8 p.21): body (2.9, 3.1) x (4.3, 4.5), lead span (6.2, 6.6), pitch 0.65 = ST TSSOP8 (D 2.9/3.0/3.1, E1 4.3/4.4/4.5, E 6.2/6.4/6.6, e 0.65). Shared land Adom_Gen:STMicroelectronics_TSSOP8. Task master ruling 2026-11-21 (ST TSSOP8).