Generated by kicad-footprint-generator · KiCad file format 20260206
LM258QT
STMicroelectronics · Operational Amplifier · DFN-8-EP(2x2)
LM258QT from STMicroelectronics, in a DFN-8-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Out1 | output | Output of amplifier 1, which can swing from 0 V to (VCC+ - 1.5 V). |
| 2 | In1- | input | Inverting input of amplifier 1, with input voltage range -0.3 V to 32 V. |
| 3 | In1+ | input | Non-inverting input of amplifier 1, with common-mode range from VCC- to (VCC+ - 1.5 V) at 25 °C. |
| 4 | Vcc- | power_in | Negative supply or ground for single-supply operation. |
| 5 | In2+ | input | Non-inverting input of amplifier 2, with common-mode range from VCC- to (VCC+ - 1.5 V) at 25 °C. |
| 6 | In2- | input | Inverting input of amplifier 2, with input voltage range -0.3 V to 32 V. |
| 7 | Out2 | output | Output of amplifier 2, which can swing from 0 V to (VCC+ - 1.5 V). |
| 8 | Vcc+ | power_in | Positive supply, operating range 3 V to 30 V. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | DFN-8-EP(2x2) |
| Category | Amplifiers/Comparators |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | Vio | 5 | mV | Table 3 default: VCC+ = 5 V, VCC- = Ground, Vo = 1.4 V, Tamb = 25 °C | 7 | ||
| Input offset voltage | Vio | 7 | mV | Tmin ≤ Tamb ≤ Tmax | 7 | ||
| Input offset voltage drift | ΔVio/ΔT | 7 | 30 | µV/°C | LM158, LM258, LM358 row | 7 | |
| Input offset current | Iio | 2 | 30 | nA | Table 3 default: Tamb = 25 °C | 7 | |
| Input offset current | Iio | 40 | nA | Tmin ≤ Tamb ≤ Tmax | 7 | ||
| Input offset current drift | ΔIio/ΔT | 10 | 300 | pA/°C | LM158, LM258, LM358 row | 7 | |
| Input bias current | Iib | 20 | 150 | nA | Table 3 default: Tamb = 25 °C | 7 | |
| Input bias current | Iib | 200 | nA | Tmin ≤ Tamb ≤ Tmax | 7 | ||
| Large signal voltage gain | Avd | 50 | 100 | V/mV | VCC+ = 15 V, RL = 2 kΩ, Vo = 1.4 V to 11.4 V | 7 | |
| Large signal voltage gain | Avd | 25 | V/mV | Tmin ≤ Tamb ≤ Tmax | 7 | ||
| Supply voltage rejection ratio | SVR | 65 | 100 | dB | VCC+ = 5 V to 30 V, Rs ≤ 10 kΩ | 7 | |
| Supply voltage rejection ratio | SVR | 65 | dB | Tmin ≤ Tamb ≤ Tmax | 7 | ||
| Supply current, all amp, no load | ICC | 0.7 | 1.2 | mA | Tmin ≤ Tamb ≤ Tmax, VCC+ = 5 V | 7 | |
| Supply current, all amp, no load | ICC | 2 | mA | Tmin ≤ Tamb ≤ Tmax, VCC+ = 30 V | 7 | ||
| Common mode rejection ratio | CMR | 70 | 85 | dB | Rs ≤ 10 kΩ | 7 | |
| Common mode rejection ratio | CMR | 60 | dB | Tmin ≤ Tamb ≤ Tmax | 7 | ||
| Output current source | Isource | 20 | 40 | 60 | mA | VCC+ = 15 V, Vo = 2 V, Vid = 1 V | 7 |
| Output sink current | Isink | 10 | 20 | mA | VCC+ = 15 V, Vo = 2 V, Vid = -1 V | 7 | |
| Output sink current | Isink | 12 | 50 | µA | VCC+ = 15 V, Vo = 0.2 V, Vid = -1 V | 7 | |
| High level output voltage | VOH | 26 | 27 | V | VCC+ = 30 V, RL = 2 kΩ connected to VCC-, Tamb = 25 °C | 8 | |
| High level output voltage | VOH | 26 | V | VCC+ = 30 V, RL = 2 kΩ connected to VCC-, Tmin ≤ Tamb ≤ Tmax | 8 | ||
| High level output voltage | VOH | 27 | 28 | V | VCC+ = 30 V, RL = 10 kΩ connected to VCC-, Tamb = 25 °C | 8 | |
| High level output voltage | VOH | 27 | V | VCC+ = 30 V, RL = 10 kΩ connected to VCC-, Tmin ≤ Tamb ≤ Tmax | 8 | ||
| High level output voltage | VOH | 3.5 | V | VCC+ = 5 V, RL = 2 kΩ connected to VCC-, Tamb = 25 °C | 8 | ||
| High level output voltage | VOH | 3 | V | VCC+ = 5 V, RL = 2 kΩ connected to VCC-, Tmin ≤ Tamb ≤ Tmax | 8 | ||
| Low level output voltage | VOL | 5 | 20 | mV | RL = 10 kΩ connected to VCC- | 8 | |
| Low level output voltage | VOL | 20 | mV | Tmin ≤ Tamb ≤ Tmax | 8 | ||
| Slew rate | SR | 0.3 | 0.6 | V/µs | VCC+ = 15 V, Vi = 0.5 to 3 V, RL = 2 kΩ, CL = 100 pF, unity gain | 8 | |
| Gain bandwidth product | GBP | 0.7 | 1.1 | MHz | VCC+ = 30 V, f = 100 kHz, Vin = 10 mV, RL = 2 kΩ, CL = 100 pF | 8 | |
| Absolute maximum supply voltage (printed as ±16 or 32, one cell for all variants) | VCC | 32 | V | Printed as ±16 or 32 V | 5 | ||
| Input voltage | Vi | -0.3 | 32 | V | 5 | ||
| Differential input voltage | Vid | -32 | 32 | V | 5 | ||
| Input current | Iin | 5 | mA | DC | 5 | ||
| Input current | Iin | 50 | mA | AC, duty cycle = 10 %, T = 1 s | 5 | ||
| Operating free-air temperature range | Toper | -40 | 105 | °C | LM258 variant | 5 | |
| Storage temperature range | Tstg | -65 | 150 | °C | 5 | ||
| Maximum junction temperature | Tj | 150 | °C | 5 | |||
| ESD HBM: human body model | HBM | 300 | V | Human body model | 5 | ||
| ESD MM: machine model | MM | 200 | V | Machine model | 5 | ||
| ESD CDM: charged device model | CDM | 1.5 | kV | Charged device model | 5 | ||
| Supply voltage | VCC | 3 | 30 | V | 6 | ||
| Operating free air temperature range | Toper | -40 | 105 | °C | LM258 variant | 6 | |
| Thermal resistance junction to ambient, DFN8 2x2 | Rthja | 57 | °C/W | DFN8 2x2; Rth are typical values | 5 |
CAD (KiCad official)
- Symbol:
LM258QT - Footprint:
Package_DFN_QFN:DFN-8-1EP_2x2mm_P0.5mm_EP0.6x1.2mm - 3D model: DFN-8-EP(2x2) (KiCad packages3D, STEP)
- 3D model files:
lm258qt-etched.step/lm258qt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm258qt.step/lm258qt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (25 pp, sha256
40a2550bed90848d, retrieved 2026-10-03, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).