component
LM258QT
Public Made by Adomby adom
STMicroelectronics Operational Amplifier, DFN-8-EP(2x2). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownLM258QT
STMicroelectronics · Operational Amplifier · DFN-8-EP(2x2)
LM258QT from STMicroelectronics, in a DFN-8-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Out1 | output | Output of amplifier 1, which can swing from 0 V to (VCC+ - 1.5 V). |
| 2 | In1- | input | Inverting input of amplifier 1, with input voltage range -0.3 V to 32 V. |
| 3 | In1+ | input | Non-inverting input of amplifier 1, with common-mode range from VCC- to (VCC+ - 1.5 V) at 25 °C. |
| 4 | Vcc- | power_in | Negative supply or ground for single-supply operation. |
| 5 | In2+ | input | Non-inverting input of amplifier 2, with common-mode range from VCC- to (VCC+ - 1.5 V) at 25 °C. |
| 6 | In2- | input | Inverting input of amplifier 2, with input voltage range -0.3 V to 32 V. |
| 7 | Out2 | output | Output of amplifier 2, which can swing from 0 V to (VCC+ - 1.5 V). |
| 8 | Vcc+ | power_in | Positive supply, operating range 3 V to 30 V. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | DFN-8-EP(2x2) |
| Category | Amplifiers/Comparators |
| Pins | 9 |
CAD (KiCad official)
- Symbol:
LM258QT - Footprint:
Package_DFN_QFN:DFN-8-1EP_2x2mm_P0.5mm_EP0.6x1.2mm - 3D model: DFN-8-EP(2x2) (KiCad packages3D, STEP)
- 3D model files:
lm258qt-etched.step/lm258qt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm258qt.step/lm258qt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (25 pp, sha256
40a2550bed90848d, retrieved 2026-10-03, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).