main
History Download
Ray Publish 0.3.0 a8bd139

LM2586SX-ADJ

3D generated from the datasheet; KiCad's model does not fit this maker's body.

Texas Instruments · DC-DC Converters · TO-263-7

LM2586SX-ADJ from Texas Instruments, in a TO-263-7. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 Freq. Adj., ON/OFF input Freq. Adj. - ON/OFF
2 Compensation input Compensation
3 Feedback input Feedback
4 Ground power_in Ground
5 Switch passive Collector of the internal 3A NPN power switch; absolute maximum −0.4V ≤ VSW ≤ 65V (recommended 0V ≤ VSW ≤ 60V); switch current is internally limited (typical 4.0A, min 3.0A, max 7.0A) with a typical saturation voltage of 0.45V at 3A; connects to the external inductor/transformer primary.
6 Freq. Sync. input Freq. Sync.
7 VIN power_in VIN
8 Ground power_in Package tab (pad 8). The DDPAK drawing does not label the tab; the 7-pin TO-220 drawing on the same page labels it GND, and pin 4 (centre lead) is Ground (task master ruling 2026-11-17).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TO-263-7
Category Power Management (PMIC)
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VOUT Output Voltage (adjustable) VOUT 11.52 12 12.48 V VIN = 4V to 10V; ILOAD = 0.2A to 0.8A 8
Line Regulation ΔVOUT/ΔVIN 20 100 mV VIN = 4V to 10V; ILOAD = 0.2A 8
Load Regulation ΔVOUT/ΔILOAD 20 100 mV VIN = 10V; ILOAD = 0.2A to 0.8A 8
Output Reference Voltage VREF 1.208 1.23 1.252 V Measured at Feedback Pin; VCOMP = 1.0V 8
Error Amp Transconductance GM 1.8 3.2 6 mmho ICOMP = −30 μA to +30 μA; VCOMP = 1.0V 8
Error Amp Voltage Gain AVOL 400 670 V/V VCOMP = 0.5V to 1.6V; RCOMP = 1.0 MΩ (note 3) 8
Error Amp Input Bias Current IB 125 425 nA VCOMP = 1.0V 8
Input Supply Current, Switch Off IS 11 15.5 mA Switch Off (note 4) 8
Input Supply Current 50 100 mA ISWITCH = 1.8A 8
Shutdown Input Supply Current IS/D 16 100 μA VSH = 3V 8
Input Supply Undervoltage Lockout VUV 3.05 3.3 3.75 V RLOAD = 100Ω 8
Oscillator Frequency fO 85 100 115 kHz Measured at Switch Pin; RLOAD = 100Ω; VCOMP = 1.0V; Freq. Adj. Pin open (Pin 1) 8
Error Amplifier Output Swing, Upper Limit VEAO 2.6 2.8 V Upper Limit (note 5) 8
Error Amplifier Output Swing, Lower Limit VEAO 0.25 0.4 V Lower Limit (note 4) 8
Error Amp Output Current (Source or Sink) IEAO 110 165 260 μA See note (6) 8
Soft Start Current ISS 8 11 17 μA VFEEDBACK = 0.92V; VCOMP = 1.0V 8
Maximum Duty Cycle DMAX 93 98 % RLOAD = 100Ω (note 5) 8
Switch Leakage Current, Switch Off IL 15 300 μA Switch off; VSWITCH = 60V 8
Switch Saturation Voltage VSAT 0.45 0.65 V ISWITCH = 3.0A 8
NPN Switch Current Limit ICL 3 4 7 A 9
Synchronization Threshold Voltage VSTH 0.625 0.75 0.875 V FSYNC = 200 kHz; VCOMP = 1V; VIN = 5V 9
Synchronization Pin Current ISYNC 100 200 μA VIN = 5V; VCOMP = 1V; VSYNC = VSTH 9
ON/OFF Pin Threshold Voltage VSHTH 1 1.6 2.2 V VCOMP = 1V (note 7) 9
ON/OFF Pin Current ISH 15 40 65 μA VCOMP = 1V; VSH = VSHTH 9
Input Voltage (absolute maximum) VIN -0.4 45 V 4
Switch Voltage (absolute maximum) VSW -0.4 65 V 4
Compensation Pin Voltage (absolute maximum) VCOMP -0.4 2.4 V 4
Feedback Pin Voltage (absolute maximum) VFB -0.4 V Upper limit printed as 2 VOUT (expression, not numeric) 4
ON/OFF Pin Voltage (absolute maximum) VSH -0.4 6 V 4
Sync Pin Voltage (absolute maximum) VSYNC -0.4 2 V 4
Storage Temperature Range -65 150 °C 4
Lead Temperature 260 °C Soldering, 10 sec. 4
Maximum Junction Temperature 150 °C 4
Supply Voltage (recommended) VIN 4 40 V 4
Output Switch Voltage (recommended) VSW 0 60 V 4
Output Switch Current (recommended) ISW 3 A 4
Junction Temperature Range (recommended) TJ -40 125 °C 4
Junction-to-ambient thermal resistance, KTW (TO-263) RθJA 56 °C/W Mounted horizontally, 0.136 in² of 1 oz copper (note 2) 5
Junction-to-ambient thermal resistance, KTW (TO-263) RθJA 35 °C/W Mounted horizontally, 0.4896 in² of 1 oz copper (note 4) 5
Junction-to-ambient thermal resistance, KTW (TO-263) RθJA 26 °C/W Mounted horizontally, 1.0064 in² of 1 oz copper (note 6) 5
Junction-to-case thermal resistance, KTW (TO-263) RθJC 2 °C/W 5

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper (3) Junction-to-ambient thermal resistance (no external heat sink) for the 7-lead TO-220 package mounted vertically, with ½ inch leads in a socket, or on a PC board with minimum copper area. 5

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: LM2586SX-ADJ
  • Footprint: Package_TO_SOT_SMD:TO-263-7_TabPin8
  • 3D model: TO-263-7, generated on the KiCad land (body 8.64 x 10.16 mm, terminals on the pads, 4.57 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: lm2586sx-adj-etched.step / lm2586sx-adj-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm2586sx-adj.step / lm2586sx-adj.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (44 pp, sha256 062506d4c1c2d784, retrieved 2026-11-17, tier: manufacturer)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF