Generated by kicad-footprint-generator · KiCad file format 20260206
LM2586SX-ADJ
3D generated from the datasheet; KiCad's model does not fit this maker's body.
Texas Instruments · DC-DC Converters · TO-263-7
LM2586SX-ADJ from Texas Instruments, in a TO-263-7. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Freq. Adj., ON/OFF | input | Freq. Adj. - ON/OFF |
| 2 | Compensation | input | Compensation |
| 3 | Feedback | input | Feedback |
| 4 | Ground | power_in | Ground |
| 5 | Switch | passive | Collector of the internal 3A NPN power switch; absolute maximum −0.4V ≤ VSW ≤ 65V (recommended 0V ≤ VSW ≤ 60V); switch current is internally limited (typical 4.0A, min 3.0A, max 7.0A) with a typical saturation voltage of 0.45V at 3A; connects to the external inductor/transformer primary. |
| 6 | Freq. Sync. | input | Freq. Sync. |
| 7 | VIN | power_in | VIN |
| 8 | Ground | power_in | Package tab (pad 8). The DDPAK drawing does not label the tab; the 7-pin TO-220 drawing on the same page labels it GND, and pin 4 (centre lead) is Ground (task master ruling 2026-11-17). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TO-263-7 |
| Category | Power Management (PMIC) |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VOUT Output Voltage (adjustable) | VOUT | 11.52 | 12 | 12.48 | V | VIN = 4V to 10V; ILOAD = 0.2A to 0.8A | 8 |
| Line Regulation | ΔVOUT/ΔVIN | 20 | 100 | mV | VIN = 4V to 10V; ILOAD = 0.2A | 8 | |
| Load Regulation | ΔVOUT/ΔILOAD | 20 | 100 | mV | VIN = 10V; ILOAD = 0.2A to 0.8A | 8 | |
| Output Reference Voltage | VREF | 1.208 | 1.23 | 1.252 | V | Measured at Feedback Pin; VCOMP = 1.0V | 8 |
| Error Amp Transconductance | GM | 1.8 | 3.2 | 6 | mmho | ICOMP = −30 μA to +30 μA; VCOMP = 1.0V | 8 |
| Error Amp Voltage Gain | AVOL | 400 | 670 | V/V | VCOMP = 0.5V to 1.6V; RCOMP = 1.0 MΩ (note 3) | 8 | |
| Error Amp Input Bias Current | IB | 125 | 425 | nA | VCOMP = 1.0V | 8 | |
| Input Supply Current, Switch Off | IS | 11 | 15.5 | mA | Switch Off (note 4) | 8 | |
| Input Supply Current | 50 | 100 | mA | ISWITCH = 1.8A | 8 | ||
| Shutdown Input Supply Current | IS/D | 16 | 100 | μA | VSH = 3V | 8 | |
| Input Supply Undervoltage Lockout | VUV | 3.05 | 3.3 | 3.75 | V | RLOAD = 100Ω | 8 |
| Oscillator Frequency | fO | 85 | 100 | 115 | kHz | Measured at Switch Pin; RLOAD = 100Ω; VCOMP = 1.0V; Freq. Adj. Pin open (Pin 1) | 8 |
| Error Amplifier Output Swing, Upper Limit | VEAO | 2.6 | 2.8 | V | Upper Limit (note 5) | 8 | |
| Error Amplifier Output Swing, Lower Limit | VEAO | 0.25 | 0.4 | V | Lower Limit (note 4) | 8 | |
| Error Amp Output Current (Source or Sink) | IEAO | 110 | 165 | 260 | μA | See note (6) | 8 |
| Soft Start Current | ISS | 8 | 11 | 17 | μA | VFEEDBACK = 0.92V; VCOMP = 1.0V | 8 |
| Maximum Duty Cycle | DMAX | 93 | 98 | % | RLOAD = 100Ω (note 5) | 8 | |
| Switch Leakage Current, Switch Off | IL | 15 | 300 | μA | Switch off; VSWITCH = 60V | 8 | |
| Switch Saturation Voltage | VSAT | 0.45 | 0.65 | V | ISWITCH = 3.0A | 8 | |
| NPN Switch Current Limit | ICL | 3 | 4 | 7 | A | 9 | |
| Synchronization Threshold Voltage | VSTH | 0.625 | 0.75 | 0.875 | V | FSYNC = 200 kHz; VCOMP = 1V; VIN = 5V | 9 |
| Synchronization Pin Current | ISYNC | 100 | 200 | μA | VIN = 5V; VCOMP = 1V; VSYNC = VSTH | 9 | |
| ON/OFF Pin Threshold Voltage | VSHTH | 1 | 1.6 | 2.2 | V | VCOMP = 1V (note 7) | 9 |
| ON/OFF Pin Current | ISH | 15 | 40 | 65 | μA | VCOMP = 1V; VSH = VSHTH | 9 |
| Input Voltage (absolute maximum) | VIN | -0.4 | 45 | V | 4 | ||
| Switch Voltage (absolute maximum) | VSW | -0.4 | 65 | V | 4 | ||
| Compensation Pin Voltage (absolute maximum) | VCOMP | -0.4 | 2.4 | V | 4 | ||
| Feedback Pin Voltage (absolute maximum) | VFB | -0.4 | V | Upper limit printed as 2 VOUT (expression, not numeric) | 4 | ||
| ON/OFF Pin Voltage (absolute maximum) | VSH | -0.4 | 6 | V | 4 | ||
| Sync Pin Voltage (absolute maximum) | VSYNC | -0.4 | 2 | V | 4 | ||
| Storage Temperature Range | -65 | 150 | °C | 4 | |||
| Lead Temperature | 260 | °C | Soldering, 10 sec. | 4 | |||
| Maximum Junction Temperature | 150 | °C | 4 | ||||
| Supply Voltage (recommended) | VIN | 4 | 40 | V | 4 | ||
| Output Switch Voltage (recommended) | VSW | 0 | 60 | V | 4 | ||
| Output Switch Current (recommended) | ISW | 3 | A | 4 | |||
| Junction Temperature Range (recommended) | TJ | -40 | 125 | °C | 4 | ||
| Junction-to-ambient thermal resistance, KTW (TO-263) | RθJA | 56 | °C/W | Mounted horizontally, 0.136 in² of 1 oz copper (note 2) | 5 | ||
| Junction-to-ambient thermal resistance, KTW (TO-263) | RθJA | 35 | °C/W | Mounted horizontally, 0.4896 in² of 1 oz copper (note 4) | 5 | ||
| Junction-to-ambient thermal resistance, KTW (TO-263) | RθJA | 26 | °C/W | Mounted horizontally, 1.0064 in² of 1 oz copper (note 6) | 5 | ||
| Junction-to-case thermal resistance, KTW (TO-263) | RθJC | 2 | °C/W | 5 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | (3) Junction-to-ambient thermal resistance (no external heat sink) for the 7-lead TO-220 package mounted vertically, with ½ inch leads in a socket, or on a PC board with minimum copper area. | 5 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
LM2586SX-ADJ - Footprint:
Package_TO_SOT_SMD:TO-263-7_TabPin8 - 3D model: TO-263-7, generated on the KiCad land (body 8.64 x 10.16 mm, terminals on the pads, 4.57 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
lm2586sx-adj-etched.step/lm2586sx-adj-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm2586sx-adj.step/lm2586sx-adj.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (44 pp, sha256
062506d4c1c2d784, retrieved 2026-11-17, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).