main
Ray
Publish 0.4.0
3540066
LM2576HVS-ADJ
3D generated from the datasheet; KiCad's model does not fit this maker's body.
UMW · DC-DC Converters · TO-263-5
LM2576HVS-ADJ from UMW, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Unregulated input supply voltage. Operating range 4.5V to 60V for the HV version (absolute max 63V). Bypass to GND with a low-ESR input capacitor (CIN) close to the pin. |
| 2 | Output | power_out | Switching output pin from the internal 3A NPN switch. Connects to the external catch diode (e.g. 1N5822) and to the LC filter (typ. 100µH inductor, 1000µF output capacitor) that produces the regulated DC output. |
| 3 | GND | power_in | Ground reference for the device. Tie directly to the ground plane; input and output capacitor return currents should meet here with minimum trace length. |
| 4 | Feedback | input | Output-voltage feedback to the internal error amplifier (1.23V bandgap reference). For the ADJ version, connect an external resistor divider (R1=1.0k typical, R2 chosen for target VOUT: VOUT = 1.23V × (1 + R2/R1)) from VOUT to this pin and to GND. |
| 5 | ON/OFF | input | TTL-compatible active-low shutdown input. Regulator is enabled when this pin is low or left floating; pulling it high (up to VIN, absolute range -0.3V ≤ V ≤ +VIN) forces the device into low-power standby (~50µA typical). |
| 6 | GND | power_in | Package tab (pad 6). the sheet does not name the tab's net; centre lead's net per the package (TO-263/TO-252 tab and centre lead are one piece of lead frame; task master ruling 2026-11-17): pin 3 is GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | UMW |
| Package | TO-263-5 |
| Category | PMIC |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage, LM2576HV-ADJ, standard face (TJ=25°C) | VOUT | 1.193 | 1.23 | 1.273 | V | 8V≤VIN≤60V, 0.5A≤ILOAD≤3A; Circuit of Figure 2 | 7 |
| Output voltage, LM2576HV-ADJ, bold face (full operating temperature range) | VOUT | 1.18 | 1.23 | 1.286 | V | 8V≤VIN≤60V, 0.5A≤ILOAD≤3A; Circuit of Figure 2 | 7 |
| Output voltage (ADJ, reference row) | VOUT | 1.217 | 1.23 | 1.243 | V | VIN=12V, ILOAD=0.5A, VOUT=5V; Circuit of Figure 2 | 7 |
| Oscillator frequency | fO | 47 | 52 | 58 | kHz | 8 | |
| Saturation voltage, standard face | VSAT | 1.4 | 1.8 | V | IOUT=3A (Note 4) | 8 | |
| Saturation voltage, bold face (full operating temperature range) | VSAT | 1.4 | 2 | V | IOUT=3A (Note 4) | 8 | |
| Max duty cycle (ON) | DC | 93 | 98 | % | 8 | ||
| Current limit, standard face | ICL | 4.2 | 5.8 | 6.9 | A | 8 | |
| Current limit, bold face (full operating temperature range) | ICL | 3.5 | 5.8 | 7.5 | A | 8 | |
| Feedback bias current, standard face | IB | 50 | 100 | nA | (Note 5) | 8 | |
| Feedback bias current, bold face (full operating temperature range) | IB | 50 | 500 | nA | (Note 5) | 8 | |
| Standby quiescent current | ISTBY | 50 | 200 | µA | ON/OFF pin=5V (OFF) | 8 | |
| ON/OFF logic input high voltage, standard face | VIH | 2.2 | 1.4 | V | VOUT=0V | 9 | |
| ON/OFF logic input high voltage, bold face (full operating temperature range) | VIH | 2.4 | 1.4 | V | VOUT=0V | 9 | |
| ON/OFF logic input low voltage, standard face | VIL | 1.2 | 1 | V | VOUT=Nominal Output Voltage | 9 | |
| ON/OFF logic input low voltage, bold face (full operating temperature range) | VIL | 1.2 | 0.8 | V | VOUT=Nominal Output Voltage | 9 | |
| ON/OFF pin input current high | IIH | 12 | 30 | µA | ON/OFF Pin=5V(OFF) | 9 | |
| ON/OFF pin input current low | IIL | 0 | 10 | µA | ON/OFF Pin=0V(ON) | 9 | |
| Maximum supply voltage, LM2576HV | VIN | 63 | V | 4 | |||
| ON/OFF pin input voltage (lower bound; upper bound is +VIN) | VON/OFF | -0.3 | V | -0.3 ≤ V ≤ +VIN | 4 | ||
| Output voltage to ground (steady state) | VOUT | -1 | V | Steady state | 4 | ||
| Storage temperature range | TSTG | -65 | 150 | °C | 4 | ||
| Maximum junction temperature | TJ | 150 | °C | 4 | |||
| Minimum ESD rating | ESD | 2 | kV | C=100pF, R=1.5kΩ | 4 | ||
| Lead temperature (soldering) | TLEAD | 260 | °C | Soldering, 10 seconds | 4 | ||
| Operating junction temperature range | TJ | -40 | 125 | °C | LM2576/LM2576HV | 4 | |
| Supply voltage, LM2576HV | VIN | 4.5 | 60 | V | LM2576HV | 4 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
LM2576HVS-ADJ - Footprint:
Package_TO_SOT_SMD:TO-263-5_TabPin6 - 3D model: TO-263-5, generated on the KiCad land (body 8.635 x 10.15 mm, terminals on the pads, 4.575 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
lm2576hvs-adj-etched.step/lm2576hvs-adj-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm2576hvs-adj.step/lm2576hvs-adj.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: UMW datasheet (18 pp, sha256
10275fb18a78ad8b, retrieved 2026-11-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
# LM2576HVS-ADJ
> 3D generated from the datasheet; KiCad's model does not fit this maker's body.
**UMW** · DC-DC Converters · TO-263-5
LM2576HVS-ADJ from UMW, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Unregulated input supply voltage. Operating range 4.5V to 60V for the HV version (absolute max 63V). Bypass to GND with a low-ESR input capacitor (CIN) close to the pin. |
| 2 | Output | power_out | Switching output pin from the internal 3A NPN switch. Connects to the external catch diode (e.g. 1N5822) and to the LC filter (typ. 100µH inductor, 1000µF output capacitor) that produces the regulated DC output. |
| 3 | GND | power_in | Ground reference for the device. Tie directly to the ground plane; input and output capacitor return currents should meet here with minimum trace length. |
| 4 | Feedback | input | Output-voltage feedback to the internal error amplifier (1.23V bandgap reference). For the ADJ version, connect an external resistor divider (R1=1.0k typical, R2 chosen for target VOUT: VOUT = 1.23V × (1 + R2/R1)) from VOUT to this pin and to GND. |
| 5 | ON/OFF | input | TTL-compatible active-low shutdown input. Regulator is enabled when this pin is low or left floating; pulling it high (up to VIN, absolute range -0.3V ≤ V ≤ +VIN) forces the device into low-power standby (~50µA typical). |
| 6 | GND | power_in | Package tab (pad 6). the sheet does not name the tab's net; centre lead's net per the package (TO-263/TO-252 tab and centre lead are one piece of lead frame; task master ruling 2026-11-17): pin 3 is GND. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | UMW |
| Package | TO-263-5 |
| Category | PMIC |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage, LM2576HV-ADJ, standard face (TJ=25°C) | VOUT | 1.193 | 1.23 | 1.273 | V | 8V≤VIN≤60V, 0.5A≤ILOAD≤3A; Circuit of Figure 2 | 7 |
| Output voltage, LM2576HV-ADJ, bold face (full operating temperature range) | VOUT | 1.18 | 1.23 | 1.286 | V | 8V≤VIN≤60V, 0.5A≤ILOAD≤3A; Circuit of Figure 2 | 7 |
| Output voltage (ADJ, reference row) | VOUT | 1.217 | 1.23 | 1.243 | V | VIN=12V, ILOAD=0.5A, VOUT=5V; Circuit of Figure 2 | 7 |
| Oscillator frequency | fO | 47 | 52 | 58 | kHz | | 8 |
| Saturation voltage, standard face | VSAT | | 1.4 | 1.8 | V | IOUT=3A (Note 4) | 8 |
| Saturation voltage, bold face (full operating temperature range) | VSAT | | 1.4 | 2 | V | IOUT=3A (Note 4) | 8 |
| Max duty cycle (ON) | DC | 93 | 98 | | % | | 8 |
| Current limit, standard face | ICL | 4.2 | 5.8 | 6.9 | A | | 8 |
| Current limit, bold face (full operating temperature range) | ICL | 3.5 | 5.8 | 7.5 | A | | 8 |
| Feedback bias current, standard face | IB | | 50 | 100 | nA | (Note 5) | 8 |
| Feedback bias current, bold face (full operating temperature range) | IB | | 50 | 500 | nA | (Note 5) | 8 |
| Standby quiescent current | ISTBY | | 50 | 200 | µA | ON/OFF pin=5V (OFF) | 8 |
| ON/OFF logic input high voltage, standard face | VIH | 2.2 | 1.4 | | V | VOUT=0V | 9 |
| ON/OFF logic input high voltage, bold face (full operating temperature range) | VIH | 2.4 | 1.4 | | V | VOUT=0V | 9 |
| ON/OFF logic input low voltage, standard face | VIL | | 1.2 | 1 | V | VOUT=Nominal Output Voltage | 9 |
| ON/OFF logic input low voltage, bold face (full operating temperature range) | VIL | | 1.2 | 0.8 | V | VOUT=Nominal Output Voltage | 9 |
| ON/OFF pin input current high | IIH | | 12 | 30 | µA | ON/OFF Pin=5V(OFF) | 9 |
| ON/OFF pin input current low | IIL | | 0 | 10 | µA | ON/OFF Pin=0V(ON) | 9 |
| Maximum supply voltage, LM2576HV | VIN | | | 63 | V | | 4 |
| ON/OFF pin input voltage (lower bound; upper bound is +VIN) | VON/OFF | -0.3 | | | V | -0.3 ≤ V ≤ +VIN | 4 |
| Output voltage to ground (steady state) | VOUT | -1 | | | V | Steady state | 4 |
| Storage temperature range | TSTG | -65 | | 150 | °C | | 4 |
| Maximum junction temperature | TJ | | | 150 | °C | | 4 |
| Minimum ESD rating | ESD | 2 | | | kV | C=100pF, R=1.5kΩ | 4 |
| Lead temperature (soldering) | TLEAD | | | 260 | °C | Soldering, 10 seconds | 4 |
| Operating junction temperature range | TJ | -40 | | 125 | °C | LM2576/LM2576HV | 4 |
| Supply voltage, LM2576HV | VIN | 4.5 | | 60 | V | LM2576HV | 4 |
## CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol: `LM2576HVS-ADJ`
- Footprint: `Package_TO_SOT_SMD:TO-263-5_TabPin6`
- 3D model: TO-263-5, generated on the KiCad land (body 8.635 x 10.15 mm, terminals on the pads, 4.575 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `lm2576hvs-adj-etched.step` / `lm2576hvs-adj-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm2576hvs-adj.step` / `lm2576hvs-adj.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [UMW datasheet](docs/lm2576hvs-adj-datasheet.pdf) (18 pp, sha256 `10275fb18a78ad8b`, retrieved 2026-11-17, tier: manufacturer)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
[Datasheet PDF](docs/lm2576hvs-adj-datasheet.pdf)