main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs lm2576hvs-adj: rebuilt as a full factory component page (was a placeholder) · Ray
viewers lm2576hvs-adj: viewers · Ray
lm2576hvs-adj-etched.fit.json lm2576hvs-adj: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lm2576hvs-adj-etched.glb lm2576hvs-adj: rebuilt as a full factory component page (was a placeholder) · Ray
lm2576hvs-adj-etched.step lm2576hvs-adj: rebuilt as a full factory component page (was a placeholder) · Ray
lm2576hvs-adj-hero.glb Publish 0.4.0 · Ray
lm2576hvs-adj-hero.overlay.json Publish 0.4.0 · Ray
lm2576hvs-adj.glb Publish 0.4.0 · Ray
lm2576hvs-adj.kicad_mod Publish 0.1.0 · Ray
lm2576hvs-adj.kicad_sym Publish 0.3.0 · Ray
lm2576hvs-adj.lbr Publish 0.4.0 · Ray
lm2576hvs-adj.step Publish 0.4.0 · Ray
package.json Publish 0.4.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.4.0 · Ray

LM2576HVS-ADJ

3D generated from the datasheet; KiCad's model does not fit this maker's body.

UMW · DC-DC Converters · TO-263-5

LM2576HVS-ADJ from UMW, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 VIN power_in Unregulated input supply voltage. Operating range 4.5V to 60V for the HV version (absolute max 63V). Bypass to GND with a low-ESR input capacitor (CIN) close to the pin.
2 Output power_out Switching output pin from the internal 3A NPN switch. Connects to the external catch diode (e.g. 1N5822) and to the LC filter (typ. 100µH inductor, 1000µF output capacitor) that produces the regulated DC output.
3 GND power_in Ground reference for the device. Tie directly to the ground plane; input and output capacitor return currents should meet here with minimum trace length.
4 Feedback input Output-voltage feedback to the internal error amplifier (1.23V bandgap reference). For the ADJ version, connect an external resistor divider (R1=1.0k typical, R2 chosen for target VOUT: VOUT = 1.23V × (1 + R2/R1)) from VOUT to this pin and to GND.
5 ON/OFF input TTL-compatible active-low shutdown input. Regulator is enabled when this pin is low or left floating; pulling it high (up to VIN, absolute range -0.3V ≤ V ≤ +VIN) forces the device into low-power standby (~50µA typical).
6 GND power_in Package tab (pad 6). the sheet does not name the tab's net; centre lead's net per the package (TO-263/TO-252 tab and centre lead are one piece of lead frame; task master ruling 2026-11-17): pin 3 is GND.

Key specifications

Parameter Value
Manufacturer UMW
Package TO-263-5
Category PMIC
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output voltage, LM2576HV-ADJ, standard face (TJ=25°C) VOUT 1.193 1.23 1.273 V 8V≤VIN≤60V, 0.5A≤ILOAD≤3A; Circuit of Figure 2 7
Output voltage, LM2576HV-ADJ, bold face (full operating temperature range) VOUT 1.18 1.23 1.286 V 8V≤VIN≤60V, 0.5A≤ILOAD≤3A; Circuit of Figure 2 7
Output voltage (ADJ, reference row) VOUT 1.217 1.23 1.243 V VIN=12V, ILOAD=0.5A, VOUT=5V; Circuit of Figure 2 7
Oscillator frequency fO 47 52 58 kHz 8
Saturation voltage, standard face VSAT 1.4 1.8 V IOUT=3A (Note 4) 8
Saturation voltage, bold face (full operating temperature range) VSAT 1.4 2 V IOUT=3A (Note 4) 8
Max duty cycle (ON) DC 93 98 % 8
Current limit, standard face ICL 4.2 5.8 6.9 A 8
Current limit, bold face (full operating temperature range) ICL 3.5 5.8 7.5 A 8
Feedback bias current, standard face IB 50 100 nA (Note 5) 8
Feedback bias current, bold face (full operating temperature range) IB 50 500 nA (Note 5) 8
Standby quiescent current ISTBY 50 200 µA ON/OFF pin=5V (OFF) 8
ON/OFF logic input high voltage, standard face VIH 2.2 1.4 V VOUT=0V 9
ON/OFF logic input high voltage, bold face (full operating temperature range) VIH 2.4 1.4 V VOUT=0V 9
ON/OFF logic input low voltage, standard face VIL 1.2 1 V VOUT=Nominal Output Voltage 9
ON/OFF logic input low voltage, bold face (full operating temperature range) VIL 1.2 0.8 V VOUT=Nominal Output Voltage 9
ON/OFF pin input current high IIH 12 30 µA ON/OFF Pin=5V(OFF) 9
ON/OFF pin input current low IIL 0 10 µA ON/OFF Pin=0V(ON) 9
Maximum supply voltage, LM2576HV VIN 63 V 4
ON/OFF pin input voltage (lower bound; upper bound is +VIN) VON/OFF -0.3 V -0.3 ≤ V ≤ +VIN 4
Output voltage to ground (steady state) VOUT -1 V Steady state 4
Storage temperature range TSTG -65 150 °C 4
Maximum junction temperature TJ 150 °C 4
Minimum ESD rating ESD 2 kV C=100pF, R=1.5kΩ 4
Lead temperature (soldering) TLEAD 260 °C Soldering, 10 seconds 4
Operating junction temperature range TJ -40 125 °C LM2576/LM2576HV 4
Supply voltage, LM2576HV VIN 4.5 60 V LM2576HV 4

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: LM2576HVS-ADJ
  • Footprint: Package_TO_SOT_SMD:TO-263-5_TabPin6
  • 3D model: TO-263-5, generated on the KiCad land (body 8.635 x 10.15 mm, terminals on the pads, 4.575 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: lm2576hvs-adj-etched.step / lm2576hvs-adj-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm2576hvs-adj.step / lm2576hvs-adj.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: UMW datasheet (18 pp, sha256 10275fb18a78ad8b, retrieved 2026-11-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF