Generated by kicad-footprint-generator · KiCad file format 20260206
LM2576HVR-5.0
HTC Korea TAEJIN Tech · DC-DC Converters · TO-263-5
LM2576HVR-5.0 from HTC Korea TAEJIN Tech, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input supply voltage. Operating range up to 60V (absolute max 63V). Should be bypassed with a 100uF aluminum electrolytic capacitor close to the pin. |
| 2 | VOUT | power_out | Switch output. Internal power switch emitter/drain; connects to the catch diode cathode and the inductor. Fixed 5.0V regulated output for the -5.0 variant, delivered after the LC filter. Guaranteed 3A load current. |
| 3 | GND | power_in | Device ground. Single-point ground return for the input capacitor, output capacitor, catch diode, and feedback network. On the TO-263 package this pin is also the tab (thermal pad) and must be connected to ground. |
| 4 | FB/ADJ | input | Output voltage feedback / adjust pin. For the fixed 5.0V version, connect directly to the regulated output node (post-inductor). Internal reference is 1.23V; feedback bias current typically 50nA (max 500nA). |
| 5 | ON/OFF | input | Active-low shutdown input (TTL-compatible). Logic low (VIL <= 1.2V typ, 0.8V over temp) enables the regulator; logic high (VIH >= 2.2V, 2.4V over temp) puts the device in standby (typ 50uA at VIN=60V). Tie to GND for always-on operation. |
| 6 | GND | power_in | Package tab (pad 6). the sheet does not name the tab's net; centre lead's net per the package (TO-263/TO-252 tab and centre lead are one piece of lead frame; task master ruling 2026-11-17): pin 3 is GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HTC Korea TAEJIN Tech |
| Package | TO-263-5 |
| Category | PMIC |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Supply Voltage | VIN | 63 | V | 1 | |||
| ON/OFF Pin Input Voltage | -0.3 | V | max printed as +VIN | 1 | |||
| Output Voltage to Ground (Steady State) | -0.75 | V | Steady state | 1 | |||
| Lead Temperature (Soldering, 5 sec) | TSOL | 260 | ℃ | Soldering, 5 sec | 1 | ||
| Storage Temperature Range | TSTG | -65 | 150 | ℃ | 1 | ||
| Maximum Junction Temperature Range | TJOPR | 150 | ℃ | 1 | |||
| Supply Voltage | VIN | 60 | V | 2 | |||
| Temperature Range | TJ | -40 | 125 | ℃ | 2 | ||
| Output Voltage | VO | 4.9 | 5 | 5.1 | V | VIN =12V, ILOAD =0.5A | 4 |
| Output Voltage | VO | 4.8 | 5 | 5.225 | V | 0.5A ≤ ILOAD ≤ 3A, 8V ≤ VIN ≤ 55V, TJ=25℃ (standard face) | 4 |
| Output Voltage | VO | 4.75 | 5 | 5.275 | V | 0.5A ≤ ILOAD ≤ 3A, 8V ≤ VIN ≤ 55V, full operating temperature range (boldface) | 4 |
| Oscillator Frequency | fO | 47 | 52 | 58 | kHZ | TJ=25℃ (standard face), Note 8 | 4 |
| Oscillator Frequency | fO | 42 | 52 | 63 | kHZ | full operating temperature range (boldface), Note 8 | 4 |
| Saturation Voltage | VSAT | 1.4 | 1.55 | V | IO = 3A (Note 4), TJ=25℃ | 4 | |
| Saturation Voltage | VSAT | 1.7 | V | IO = 3A (Note 4), full operating temperature range | 4 | ||
| Max Duty Cycle (ON) | DC | 93 | 98 | % | Note 5: feedback pin removed from output and connected to 0V | 4 | |
| Current Limit | ICL | 4.2 | 5.8 | 6.9 | A | Note 4, 8, TJ=25℃ | 4 |
| Current Limit | ICL | 3.5 | 5.8 | 7.5 | A | Note 4, 8, full operating temperature range | 4 |
| Output Leakage Current | IL | 7.5 | mA | Output=0V (Notes 6, 7) | 5 | ||
| Quiescent Current | IQ | 5 | 10 | mA | Note 6: feedback pin connected to +12V to force output transistor OFF | 5 | |
| Standby Quiescent Current | ISTBY | 50 | 200 | uA | ON/OFF Pin = 5V (OFF), VIN = 60V | 5 | |
| ON/OFF Pin Logic Input Level | VIH | 2.2 | V | VO = 0V, TJ=25℃ | 5 | ||
| ON/OFF Pin Logic Input Level | VIH | 1.4 | V | VO = 0V, full operating temperature range | 5 | ||
| ON/OFF Pin Logic Input Level | VIL | 1.2 | V | VO = Nominal Output Voltage, TJ=25℃ | 5 | ||
| ON/OFF Pin Logic Input Level | VIL | 0.8 | V | VO = Nominal Output Voltage, full operating temperature range | 5 | ||
| ON/OFF Pin Input Current | IIH | 12 | 30 | uA | ON/OFF Pin = 5V (OFF) | 5 | |
| ON/OFF Pin Input Current | IIL | 0 | 10 | uA | ON/OFF Pin = 0V (ON) | 5 |
CAD (KiCad official)
- Symbol:
LM2576HVR-5.0 - Footprint:
Package_TO_SOT_SMD:TO-263-5_TabPin6 - 3D model: TO-263-5 (KiCad packages3D, STEP)
- 3D model files:
lm2576hvr-5-0-etched.step/lm2576hvr-5-0-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm2576hvr-5-0.step/lm2576hvr-5-0.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HTC Korea TAEJIN Tech datasheet (8 pp, sha256
d07d513e4d37f22f, retrieved 2026-11-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).