Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LM2576HVR-5.0

HTC Korea TAEJIN Tech · DC-DC Converters · TO-263-5

LM2576HVR-5.0 from HTC Korea TAEJIN Tech, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Input supply voltage. Operating range up to 60V (absolute max 63V). Should be bypassed with a 100uF aluminum electrolytic capacitor close to the pin.
2 VOUT power_out Switch output. Internal power switch emitter/drain; connects to the catch diode cathode and the inductor. Fixed 5.0V regulated output for the -5.0 variant, delivered after the LC filter. Guaranteed 3A load current.
3 GND power_in Device ground. Single-point ground return for the input capacitor, output capacitor, catch diode, and feedback network. On the TO-263 package this pin is also the tab (thermal pad) and must be connected to ground.
4 FB/ADJ input Output voltage feedback / adjust pin. For the fixed 5.0V version, connect directly to the regulated output node (post-inductor). Internal reference is 1.23V; feedback bias current typically 50nA (max 500nA).
5 ON/OFF input Active-low shutdown input (TTL-compatible). Logic low (VIL <= 1.2V typ, 0.8V over temp) enables the regulator; logic high (VIH >= 2.2V, 2.4V over temp) puts the device in standby (typ 50uA at VIN=60V). Tie to GND for always-on operation.
6 GND power_in Package tab (pad 6). the sheet does not name the tab's net; centre lead's net per the package (TO-263/TO-252 tab and centre lead are one piece of lead frame; task master ruling 2026-11-17): pin 3 is GND.

Key specifications

Parameter Value
Manufacturer HTC Korea TAEJIN Tech
Package TO-263-5
Category PMIC
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Supply Voltage VIN 63 V 1
ON/OFF Pin Input Voltage -0.3 V max printed as +VIN 1
Output Voltage to Ground (Steady State) -0.75 V Steady state 1
Lead Temperature (Soldering, 5 sec) TSOL 260 ℃ Soldering, 5 sec 1
Storage Temperature Range TSTG -65 150 ℃ 1
Maximum Junction Temperature Range TJOPR 150 ℃ 1
Supply Voltage VIN 60 V 2
Temperature Range TJ -40 125 ℃ 2
Output Voltage VO 4.9 5 5.1 V VIN =12V, ILOAD =0.5A 4
Output Voltage VO 4.8 5 5.225 V 0.5A ≤ ILOAD ≤ 3A, 8V ≤ VIN ≤ 55V, TJ=25℃ (standard face) 4
Output Voltage VO 4.75 5 5.275 V 0.5A ≤ ILOAD ≤ 3A, 8V ≤ VIN ≤ 55V, full operating temperature range (boldface) 4
Oscillator Frequency fO 47 52 58 kHZ TJ=25℃ (standard face), Note 8 4
Oscillator Frequency fO 42 52 63 kHZ full operating temperature range (boldface), Note 8 4
Saturation Voltage VSAT 1.4 1.55 V IO = 3A (Note 4), TJ=25℃ 4
Saturation Voltage VSAT 1.7 V IO = 3A (Note 4), full operating temperature range 4
Max Duty Cycle (ON) DC 93 98 % Note 5: feedback pin removed from output and connected to 0V 4
Current Limit ICL 4.2 5.8 6.9 A Note 4, 8, TJ=25℃ 4
Current Limit ICL 3.5 5.8 7.5 A Note 4, 8, full operating temperature range 4
Output Leakage Current IL 7.5 mA Output=0V (Notes 6, 7) 5
Quiescent Current IQ 5 10 mA Note 6: feedback pin connected to +12V to force output transistor OFF 5
Standby Quiescent Current ISTBY 50 200 uA ON/OFF Pin = 5V (OFF), VIN = 60V 5
ON/OFF Pin Logic Input Level VIH 2.2 V VO = 0V, TJ=25℃ 5
ON/OFF Pin Logic Input Level VIH 1.4 V VO = 0V, full operating temperature range 5
ON/OFF Pin Logic Input Level VIL 1.2 V VO = Nominal Output Voltage, TJ=25℃ 5
ON/OFF Pin Logic Input Level VIL 0.8 V VO = Nominal Output Voltage, full operating temperature range 5
ON/OFF Pin Input Current IIH 12 30 uA ON/OFF Pin = 5V (OFF) 5
ON/OFF Pin Input Current IIL 0 10 uA ON/OFF Pin = 0V (ON) 5

CAD (KiCad official)

  • Symbol: LM2576HVR-5.0
  • Footprint: Package_TO_SOT_SMD:TO-263-5_TabPin6
  • 3D model: TO-263-5 (KiCad packages3D, STEP)
  • 3D model files: lm2576hvr-5-0-etched.step / lm2576hvr-5-0-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm2576hvr-5-0.step / lm2576hvr-5-0.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HTC Korea TAEJIN Tech datasheet (8 pp, sha256 d07d513e4d37f22f, retrieved 2026-11-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF