← Commit history
README.md+25−50
@@ -2,17 +2,18 @@  **HTC Korea TAEJIN Tech** · DC-DC Converters · TO-263-5 -LM2576HVR-5.0 from HTC Korea TAEJIN Tech, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.+LM2576HVR-5.0 from HTC Korea TAEJIN Tech, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.  ## Pinout  | Pin | Name | Type | Function | |---|---|---|---| | 1 | VIN | power_in | Input supply voltage. Operating range up to 60V (absolute max 63V). Should be bypassed with a 100uF aluminum electrolytic capacitor close to the pin. |-| 2 | VOUT | output | Switch output. Internal power switch emitter/drain; connects to the catch diode cathode and the inductor. Fixed 5.0V regulated output for the -5.0 variant, delivered after the LC filter. Guaranteed 3A load current. |+| 2 | VOUT | power_out | Switch output. Internal power switch emitter/drain; connects to the catch diode cathode and the inductor. Fixed 5.0V regulated output for the -5.0 variant, delivered after the LC filter. Guaranteed 3A load current. | | 3 | GND | power_in | Device ground. Single-point ground return for the input capacitor, output capacitor, catch diode, and feedback network. On the TO-263 package this pin is also the tab (thermal pad) and must be connected to ground. | | 4 | FB/ADJ | input | Output voltage feedback / adjust pin. For the fixed 5.0V version, connect directly to the regulated output node (post-inductor). Internal reference is 1.23V; feedback bias current typically 50nA (max 500nA). | | 5 | ON/OFF | input | Active-low shutdown input (TTL-compatible). Logic low (VIL <= 1.2V typ, 0.8V over temp) enables the regulator; logic high (VIH >= 2.2V, 2.4V over temp) puts the device in standby (typ 50uA at VIN=60V). Tie to GND for always-on operation. |+| 6 | GND | power_in | Package tab (pad 6). the sheet does not name the tab's net; centre lead's net per the package (TO-263/TO-252 tab and centre lead are one piece of lead frame; task master ruling 2026-11-17): pin 3 is GND. |  ## Key specifications @@ -21,17 +22,7 @@ LM2576HVR-5.0 from HTC Korea TAEJIN Tech, in a TO-263-5. Pinout and pin descript | Manufacturer | HTC Korea TAEJIN Tech | | Package | TO-263-5 | | Category | PMIC |-| Pins | 5 |--## Ordering variants--Same part, different packaging or reel option.--- `LM2576HVR-5.0`-- `LM2576HVR-5.0T-5.0`-- `LM2576HVR-5.0HVT-5.0`-- `LM2576HVR-5.0DP-5.0`-- `LM2576HVR-5.0HVDP-5.0`+| Pins | 6 |  ## Electrical characteristics @@ -39,35 +30,33 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|-| Output Voltage (VIN=12V, ILOAD=0.5A) | VO | 4.9 | 5 | 5.1 | V | VIN =12V, ILOAD =0.5A | 4 |-| Output Voltage (0.5A to 3A load, 8V to 55V input, standard face) | VO | 4.8 | 5 | 5.225 | V | 0.5A ≤ ILOAD ≤ 3A, 8V ≤ VIN ≤ 55V; TJ = 25°C | 4 |-| Output Voltage (0.5A to 3A load, 8V to 55V input, full temperature range) | VO | 4.75 | 5 | 5.275 | V | 0.5A ≤ ILOAD ≤ 3A, 8V ≤ VIN ≤ 55V; full operating temperature range | 4 |-| Oscillator Frequency (25°C) | fO | 47 | 52 | 58 | kHz | Note 8; TJ = 25°C | 4 |-| Oscillator Frequency (full temperature range) | fO | 42 | 52 | 63 | kHz | Note 8; full operating temperature range | 4 |-| Current Limit (25°C) | ICL | 4.2 | 5.8 | 6.9 | A | Note 4, 8; TJ = 25°C | 4 |-| Current Limit (full temperature range) | ICL | 3.5 | 5.8 | 7.5 | A | Note 4, 8; full operating temperature range | 4 |-| Saturation Voltage (25°C) | VSAT |  | 1.4 | 1.55 | V | IO = 3A (Note 4); TJ = 25°C | 4 |-| Saturation Voltage (full temperature range) | VSAT |  | 1.4 | 1.7 | V | IO = 3A (Note 4); full operating temperature range | 4 |-| Max Duty Cycle (ON) | DC | 93 | 98 |  | % | Note 5 | 4 |-| Output Leakage Current | IL |  |  | 7.5 | mA | Output=0V; Notes 6, 7 | 5 |-| Quiescent Current | IQ |  | 5 | 10 | mA | Note 6 | 5 |-| Standby Quiescent Current | ISTBY |  | 50 | 200 | uA | ON/OFF Pin = 5V (OFF), VIN = 60V | 5 |-| ON/OFF Pin Logic Input Level High (25°C) | VIH | 2.2 |  |  | V | VO = 0V; TJ = 25°C | 5 |-| ON/OFF Pin Logic Input Level High (full temperature range) | VIH | 1.4 |  |  | V | VO = 0V; full operating temperature range | 5 |-| ON/OFF Pin Logic Input Level Low (25°C) | VIL |  |  | 1.2 | V | VO = Nominal Output Voltage; TJ = 25°C | 5 |-| ON/OFF Pin Logic Input Level Low (full temperature range) | VIL |  |  | 1 | V | VO = Nominal Output Voltage; full operating temperature range | 5 |-| ON/OFF Pin Input Current High | IIH |  | 12 | 30 | uA | ON/OFF Pin = 5V (OFF) | 5 |-| ON/OFF Pin Input Current Low | IIL |  | 0 | 10 | uA | ON/OFF Pin = 0V (ON) | 5 |-| Output Voltage Tolerance over line and load |  | -4 |  | 4 | % | Over line and load conditions (features list, fixed output versions) | 1 |-| Oscillator Frequency Tolerance | fO | -10 |  | 10 | % | Oscillator frequency (description) | 1 | | Input Supply Voltage | VIN |  |  | 63 | V |  | 1 |-| ON/OFF Pin Input Voltage |  | -0.3 |  |  | V | Upper limit printed as +VIN (not numeric) | 1 |+| ON/OFF Pin Input Voltage |  | -0.3 |  |  | V | max printed as +VIN | 1 | | Output Voltage to Ground (Steady State) |  | -0.75 |  |  | V | Steady state | 1 | | Lead Temperature (Soldering, 5 sec) | TSOL |  |  | 260 | ℃ | Soldering, 5 sec | 1 | | Storage Temperature Range | TSTG | -65 |  | 150 | ℃ |  | 1 | | Maximum Junction Temperature Range | TJOPR |  |  | 150 | ℃ |  | 1 | | Supply Voltage | VIN |  |  | 60 | V |  | 2 | | Temperature Range | TJ | -40 |  | 125 | ℃ |  | 2 |+| Output Voltage | VO | 4.9 | 5 | 5.1 | V | VIN =12V, ILOAD =0.5A | 4 |+| Output Voltage | VO | 4.8 | 5 | 5.225 | V | 0.5A ≤ ILOAD ≤ 3A, 8V ≤ VIN ≤ 55V, TJ=25℃ (standard face) | 4 |+| Output Voltage | VO | 4.75 | 5 | 5.275 | V | 0.5A ≤ ILOAD ≤ 3A, 8V ≤ VIN ≤ 55V, full operating temperature range (boldface) | 4 |+| Oscillator Frequency | fO | 47 | 52 | 58 | kHZ | TJ=25℃ (standard face), Note 8 | 4 |+| Oscillator Frequency | fO | 42 | 52 | 63 | kHZ | full operating temperature range (boldface), Note 8 | 4 |+| Saturation Voltage | VSAT |  | 1.4 | 1.55 | V | IO = 3A (Note 4), TJ=25℃ | 4 |+| Saturation Voltage | VSAT |  |  | 1.7 | V | IO = 3A (Note 4), full operating temperature range | 4 |+| Max Duty Cycle (ON) | DC | 93 | 98 |  | % | Note 5: feedback pin removed from output and connected to 0V | 4 |+| Current Limit | ICL | 4.2 | 5.8 | 6.9 | A | Note 4, 8, TJ=25℃ | 4 |+| Current Limit | ICL | 3.5 | 5.8 | 7.5 | A | Note 4, 8, full operating temperature range | 4 |+| Output Leakage Current | IL |  |  | 7.5 | mA | Output=0V (Notes 6, 7) | 5 |+| Quiescent Current | IQ |  | 5 | 10 | mA | Note 6: feedback pin connected to +12V to force output transistor OFF | 5 |+| Standby Quiescent Current | ISTBY |  | 50 | 200 | uA | ON/OFF Pin = 5V (OFF), VIN = 60V | 5 |+| ON/OFF Pin Logic Input Level | VIH | 2.2 |  |  | V | VO = 0V, TJ=25℃ | 5 |+| ON/OFF Pin Logic Input Level | VIH | 1.4 |  |  | V | VO = 0V, full operating temperature range | 5 |+| ON/OFF Pin Logic Input Level | VIL |  |  | 1.2 | V | VO = Nominal Output Voltage, TJ=25℃ | 5 |+| ON/OFF Pin Logic Input Level | VIL |  |  | 0.8 | V | VO = Nominal Output Voltage, full operating temperature range | 5 |+| ON/OFF Pin Input Current | IIH |  | 12 | 30 | uA | ON/OFF Pin = 5V (OFF) | 5 |+| ON/OFF Pin Input Current | IIL |  | 0 | 10 | uA | ON/OFF Pin = 0V (ON) | 5 |  ## CAD (KiCad official) @@ -76,25 +65,11 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries - 3D model: TO-263-5 (KiCad packages3D, STEP) - 3D model files: `lm2576hvr-5-0-etched.step` / `lm2576hvr-5-0-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm2576hvr-5-0.step` / `lm2576hvr-5-0.glb` are the bare package body. -## 3D model downloads--Two STEP files. Same geometry, different body top:--| File | Size | Use it when |-|---|---|---|-| [`lm2576hvr-5-0.step`](lm2576hvr-5-0.step) | 180 KB | You want the bare part, or you mark your own boards. |-| [`lm2576hvr-5-0-etched.step`](lm2576hvr-5-0-etched.step) | 2.0 MB | You want the part with `LM2576HVR-5.0` already on it. |--The marking in the etched file is real recessed geometry cut into the solid, not a-texture or a decal: 556 faces against 135 in the bare model. It-survives export, section views, and rendering in any CAD tool, and it drops straight-into KiCad or Fusion with no extra setup.- ## Provenance  Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [HTC Korea TAEJIN Tech datasheet](docs/lm2576hvr-5-0-datasheet.pdf) (8 pp, sha256 `d07d513e4d37f22f`, retrieved 2026-08-17, tier: lcsc)+- **Datasheet:** [HTC Korea TAEJIN Tech datasheet](docs/lm2576hvr-5-0-datasheet.pdf) (8 pp, sha256 `d07d513e4d37f22f`, retrieved 2026-11-17, tier: manufacturer) - **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - **CAD:** KiCad official libraries (CC-BY-SA 4.0). 
lm2576hvr-5-0-hero.glbadded
⋯ 1 unchanged line ⋯
lm2576hvr-5-0-hero.overlay.jsonadded+221
@@ -0,0 +1,221 @@+{+ "spec": "adom-hero 1.4",+ "mpn": "LM2576HVR-5.0",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+  "pad_outlines": {+   "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+   "rgba": [+    0.0,+    0.902,+    0.863,+    0.5+   ],+   "pads": 6,+   "span_mm": 18.55,+   "dash_mm": 0.45,+   "gap_mm": 0.27,+   "pad_stroke_mm": 0.09+  },+  "silkscreen": {+   "material": "Silkscreen reference lines - 30 percent opacity",+   "rgba": [+    0.92,+    0.96,+    1.0,+    0.3+   ],+   "footprint_items": 5,+   "pin1": {+    "source": "footprint silkscreen",+    "pad": "1"+   }+  },+  "signal_names": {+   "material": "Signal names - 50 percent opacity",+   "rgba": [+    0.92,+    0.96,+    1.0,+    0.5+   ],+   "font": "DejaVu Sans Mono",+   "labels": 6,+   "sides": "top + mirrored underside (single-sided)",+   "omitted": null,+   "fallback_to_pad_number": 0+  }+ },+ "align": {+  "ok": true,+  "board_underside": true,+  "electrical_pads_without_contact": [],+  "mounting_pads_left_out": [],+  "centre_offset_mm": 0.0,+  "over_pads": false,+  "tolerance_mm": 1.292,+  "orientation_flipped": false,+  "contacts_bbox_mm": [+   -9.375,+   5.625,+   -5.0,+   5.0+  ],+  "pads_bbox_mm": [+   -9.95,+   6.2,+   -5.4,+   5.4+  ],+  "seating_z_mm": 0.0+ },+ "sources": {+  "glb": "lm2576hvr-5-0-etched.glb",+  "glb_sha256": "b908457b2c5a25d72db868c7b1f5fe5be8a180dd51332ff13d01d993276a2edc",+  "footprint": "lm2576hvr-5-0.kicad_mod",+  "footprint_sha256": "77e8ff2d643255fc031e8ef2fb2e1370da8d761533c9dbe297fa1c83bed6ffcb",+  "pins": "page.json component.pins",+  "pins_sha256": "5a7858d9642833d76f41a4a64445d9bbb363215865635ea91967adbca47c6004"+ },+ "generator": "factory/hero_glb.py",+ "labels": [+  {+   "pad": "1",+   "text": "VIN",+   "x": -10.1,+   "y": -3.4,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "2",+   "text": "VOUT",+   "x": -10.1,+   "y": -1.7,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "3",+   "text": "GND",+   "x": -10.1,+   "y": 0.0,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "4",+   "text": "FB/ADJ",+   "x": -10.1,+   "y": 1.7,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "5",+   "text": "ON/OFF",+   "x": -10.1,+   "y": 3.4,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "6",+   "text": "GND",+   "x": 6.35,+   "y": 0.0,+   "align": "left",+   "vertical": false,+   "h": 0.6+  }+ ],+ "pads": [+  {+   "number": "1",+   "shape": "roundrect",+   "center_mm": [+    -7.65,+    -3.4+   ],+   "size_mm": [+    4.6,+    1.1+   ],+   "rot": 0.0+  },+  {+   "number": "2",+   "shape": "roundrect",+   "center_mm": [+    -7.65,+    -1.7+   ],+   "size_mm": [+    4.6,+    1.1+   ],+   "rot": 0.0+  },+  {+   "number": "3",+   "shape": "roundrect",+   "center_mm": [+    -7.65,+    0.0+   ],+   "size_mm": [+    4.6,+    1.1+   ],+   "rot": 0.0+  },+  {+   "number": "4",+   "shape": "roundrect",+   "center_mm": [+    -7.65,+    1.7+   ],+   "size_mm": [+    4.6,+    1.1+   ],+   "rot": 0.0+  },+  {+   "number": "5",+   "shape": "roundrect",+   "center_mm": [+    -7.65,+    3.4+   ],+   "size_mm": [+    4.6,+    1.1+   ],+   "rot": 0.0+  },+  {+   "number": "6",+   "shape": "roundrect",+   "center_mm": [+    1.5,+    0.0+   ],+   "size_mm": [+    9.4,+    10.8+   ],+   "rot": 0.0+  }+ ]+}\ No newline at end of file
lm2576hvr-5-0.kicad_sym+5−1
@@ -12,7 +12,7 @@       (name "VIN" (effects (font (size 1.27 1.27))))       (number "1" (effects (font (size 1.27 1.27))))     )-    (pin output line (at -17.78 0.00 0) (length 5.08)+    (pin power_out line (at -17.78 0.00 0) (length 5.08)       (name "VOUT" (effects (font (size 1.27 1.27))))       (number "2" (effects (font (size 1.27 1.27))))     )@@ -20,6 +20,10 @@       (name "GND" (effects (font (size 1.27 1.27))))       (number "3" (effects (font (size 1.27 1.27))))     )+    (pin power_in line (at 17.78 2.54 180) (length 5.08)+      (name "GND" (effects (font (size 1.27 1.27))))+      (number "6" (effects (font (size 1.27 1.27))))+    )     (pin input line (at 17.78 0.00 180) (length 5.08)       (name "ON/OFF" (effects (font (size 1.27 1.27))))       (number "5" (effects (font (size 1.27 1.27))))
lm2576hvr-5-0.lbr+3−1
@@ -59,7 +59,7 @@   <smd name="3" x="-7.6500" y="-0.0000" dx="4.6000" dy="1.1000" layer="1" roundness="45"/>   <smd name="4" x="-7.6500" y="-1.7000" dx="4.6000" dy="1.1000" layer="1" roundness="45"/>   <smd name="5" x="-7.6500" y="-3.4000" dx="4.6000" dy="1.1000" layer="1" roundness="45"/>-  <smd name="6" x="1.5000" y="-0.0000" dx="9.4000" dy="10.8000" layer="1" roundness="5"/>+  <smd name="6" x="1.5000" y="-0.0000" dx="9.4000" dy="10.8000" layer="1" roundness="5" cream="no"/>   <polygon width="0.1200" layer="21">     <vertex x="-7.6500" y="4.2100"/>     <vertex x="-7.9900" y="4.6800"/>@@ -109,6 +109,7 @@   <pin name="VIN" x="-17.78" y="2.54" length="middle" direction="pwr"/>   <pin name="VOUT" x="-17.78" y="0" length="middle" direction="out"/>   <pin name="GND" x="-17.78" y="-2.54" length="middle" direction="pwr"/>+  <pin name="GND@2" x="17.78" y="2.54" length="middle" direction="pwr" rot="R180"/>   <pin name="ON/OFF" x="17.78" y="0" length="middle" direction="in" rot="R180"/>   <pin name="FB/ADJ" x="17.78" y="-2.54" length="middle" direction="in" rot="R180"/> </symbol>@@ -125,6 +126,7 @@         <connect gate="G$1" pin="VIN" pad="1"/>         <connect gate="G$1" pin="VOUT" pad="2"/>         <connect gate="G$1" pin="GND" pad="3"/>+        <connect gate="G$1" pin="GND@2" pad="6"/>         <connect gate="G$1" pin="ON/OFF" pad="5"/>         <connect gate="G$1" pin="FB/ADJ" pad="4"/>       </connects>
package.json+142−6
@@ -1,12 +1,14 @@ {   "slug": "lm2576hvr-5-0",-  "version": "0.2.0",+  "version": "0.3.0",   "type": "component",-  "description": "HTC Korea TAEJIN Tech LM2576HVR 5 0 DC-DC Converters, TO-263-5. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "description": "HTC Korea TAEJIN Tech DC-DC Converters, TO-263-5. Pinout settled in review by an AI reviewer against the manufacturer's datasheet, KiCad symbol/footprint/3D.",   "tags": [     "component",     "pmic",-    "lm2576hvr-5.0"+    "lm2576hvr-5.0",+    "factory-2.0.0",+    "extractor-text"   ],   "dependencies": {},   "hero": {@@ -24,6 +26,140 @@     "docs/hero.png",     "docs/lm2576hvr-5-0-datasheet.pdf",     "viewers/symbol.html",-    "viewers/footprint.html"-  ]-}\ No newline at end of file+    "viewers/footprint.html",+    "lm2576hvr-5-0-hero.glb",+    "lm2576hvr-5-0-hero.overlay.json"+  ],+  "component": {+    "mpn": "LM2576HVR-5.0",+    "manufacturer": "HTC Korea TAEJIN Tech",+    "package": "TO-263-5",+    "pin_count": 6,+    "category": "PMIC",+    "subcategory": "DC-DC Converters",+    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/b4621ecb06976fd3291edc51cd733934.pdf",+    "parts": {+      "symbol": "lm2576hvr-5-0.kicad_sym",+      "footprint": "lm2576hvr-5-0.kicad_mod",+      "model_3d": "lm2576hvr-5-0-hero.glb",+      "model_3d_plain": "lm2576hvr-5-0.glb",+      "model_3d_step": "lm2576hvr-5-0-etched.step",+      "model_3d_step_plain": "lm2576hvr-5-0.step",+      "lbr": "lm2576hvr-5-0.lbr"+    },+    "distributor_links": {+      "lcsc": "C126037",+      "digikey": "5536-LM2576HVR-5.0TR-ND"+    },+    "distributor_check": {+      "checked_at": "2026-11-17T06:42:17Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "5536-LM2576HVR-5.0TR-ND",+        "status": "found"+      },+      "mouser": {+        "pn": null,+        "status": "quota"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "VIN",+        "type": "power_in",+        "description": "Input supply voltage. Operating range up to 60V (absolute max 63V). Should be bypassed with a 100uF aluminum electrolytic capacitor close to the pin."+      },+      {+        "number": "2",+        "name": "VOUT",+        "type": "power_out",+        "description": "Switch output. Internal power switch emitter/drain; connects to the catch diode cathode and the inductor. Fixed 5.0V regulated output for the -5.0 variant, delivered after the LC filter. Guaranteed 3A load current."+      },+      {+        "number": "3",+        "name": "GND",+        "type": "power_in",+        "description": "Device ground. Single-point ground return for the input capacitor, output capacitor, catch diode, and feedback network. On the TO-263 package this pin is also the tab (thermal pad) and must be connected to ground."+      },+      {+        "number": "4",+        "name": "FB/ADJ",+        "type": "input",+        "description": "Output voltage feedback / adjust pin. For the fixed 5.0V version, connect directly to the regulated output node (post-inductor). Internal reference is 1.23V; feedback bias current typically 50nA (max 500nA)."+      },+      {+        "number": "5",+        "name": "ON/OFF",+        "type": "input",+        "description": "Active-low shutdown input (TTL-compatible). Logic low (VIL <= 1.2V typ, 0.8V over temp) enables the regulator; logic high (VIH >= 2.2V, 2.4V over temp) puts the device in standby (typ 50uA at VIN=60V). Tie to GND for always-on operation."+      },+      {+        "number": "6",+        "name": "GND",+        "type": "power_in",+        "description": "Package tab (pad 6). the sheet does not name the tab's net; centre lead's net per the package (TO-263/TO-252 tab and centre lead are one piece of lead frame; task master ruling 2026-11-17): pin 3 is GND."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://datasheet.lcsc.com/datasheet/pdf/b4621ecb06976fd3291edc51cd733934.pdf",+        "pages": 8,+        "sha256": "d07d513e4d37f22f",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 6,+        "described": 6,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    },+    "models_3d": [+      {+        "file": "lm2576hvr-5-0.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          15.0,+          10.0,+          4.42+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "94c2a3dc1aaad85b6b5193f97d9a7c61b4e28bac25952a1e629557bcf747e246",+        "checked": "2026-11-17",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "lm2576hvr-5-0-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          15.0,+          10.0,+          4.42+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "dc402405985b2bd5a0abf933b2f7fddda17d4b176464b40f5aa84c1ef86fee42",+        "checked": "2026-11-17",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]+  }+}
page.json+52−28
@@ -4,31 +4,48 @@   "slug": "lm2576hvr-5-0",   "title": "LM2576HVR-5.0",   "brief": "HTC Korea TAEJIN Tech LM2576HVR 5 0 DC-DC Converters, TO-263-5. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.2.0",+  "version": "0.3.0",   "license": "CC-BY-SA-4.0",   "tags": [     "component",     "pmic",-    "lm2576hvr-5.0"+    "lm2576hvr-5.0",+    "factory-2.0.0",+    "extractor-text"   ],   "component": {     "mpn": "LM2576HVR-5.0",-    "manufacturer": "HTC Korea TAEJIN Tech LM2576HVR 5 0",+    "manufacturer": "HTC Korea TAEJIN Tech",     "package": "TO-263-5",-    "pin_count": 5,+    "pin_count": 6,     "category": "PMIC",     "subcategory": "DC-DC Converters",     "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/b4621ecb06976fd3291edc51cd733934.pdf",     "parts": {       "symbol": "lm2576hvr-5-0.kicad_sym",       "footprint": "lm2576hvr-5-0.kicad_mod",-      "model_3d": "lm2576hvr-5-0-etched.glb",+      "model_3d": "lm2576hvr-5-0-hero.glb",       "model_3d_plain": "lm2576hvr-5-0.glb",       "model_3d_step": "lm2576hvr-5-0-etched.step",       "model_3d_step_plain": "lm2576hvr-5-0.step",       "lbr": "lm2576hvr-5-0.lbr"     },-    "distributor_links": {},+    "distributor_links": {+      "lcsc": "C126037",+      "digikey": "5536-LM2576HVR-5.0TR-ND"+    },+    "distributor_check": {+      "checked_at": "2026-11-17T06:42:17Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "5536-LM2576HVR-5.0TR-ND",+        "status": "found"+      },+      "mouser": {+        "pn": null,+        "status": "quota"+      }+    },     "pins": [       {         "number": "1",@@ -39,7 +56,7 @@       {         "number": "2",         "name": "VOUT",-        "type": "output",+        "type": "power_out",         "description": "Switch output. Internal power switch emitter/drain; connects to the catch diode cathode and the inductor. Fixed 5.0V regulated output for the -5.0 variant, delivered after the LC filter. Guaranteed 3A load current."       },       {@@ -59,6 +76,12 @@         "name": "ON/OFF",         "type": "input",         "description": "Active-low shutdown input (TTL-compatible). Logic low (VIL <= 1.2V typ, 0.8V over temp) enables the regulator; logic high (VIH >= 2.2V, 2.4V over temp) puts the device in standby (typ 50uA at VIN=60V). Tie to GND for always-on operation."+      },+      {+        "number": "6",+        "name": "GND",+        "type": "power_in",+        "description": "Package tab (pad 6). the sheet does not name the tab's net; centre lead's net per the package (TO-263/TO-252 tab and centre lead are one piece of lead frame; task master ruling 2026-11-17): pin 3 is GND."       }     ],     "provenance": {@@ -67,12 +90,12 @@         "url": "https://datasheet.lcsc.com/datasheet/pdf/b4621ecb06976fd3291edc51cd733934.pdf",         "pages": 8,         "sha256": "d07d513e4d37f22f",-        "source_tier": "lcsc"+        "source_tier": "mfr"       },       "cad": "KiCad official (CC-BY-SA 4.0)",       "pins": {-        "total": 5,-        "described": 5,+        "total": 6,+        "described": 6,         "cites_pages": true,         "refuses_to_fabricate": true       }@@ -90,15 +113,15 @@         "origin": "footprint origin = pad-pattern centre",         "seat": "z = 0",         "extents_mm": [-          15.0,-          10.0,+          15,+          10,           4.42         ],-        "zmin_mm": 0.0,-        "centre_offset_mm": 0.0,+        "zmin_mm": 0,+        "centre_offset_mm": 0,         "footprint_binding": "identity",         "sha256": "94c2a3dc1aaad85b6b5193f97d9a7c61b4e28bac25952a1e629557bcf747e246",-        "checked": "2026-10-07",+        "checked": "2026-11-17",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -109,15 +132,15 @@         "origin": "footprint origin = pad-pattern centre",         "seat": "z = 0",         "extents_mm": [-          15.0,-          10.0,+          15,+          10,           4.42         ],-        "zmin_mm": 0.0,-        "centre_offset_mm": 0.0,+        "zmin_mm": 0,+        "centre_offset_mm": 0,         "footprint_binding": "identity",-        "sha256": "3de632539cf75cf0b368283d8c81ded5b57e20abe371ee03f99b8418564f2f69",-        "checked": "2026-10-16",+        "sha256": "dc402405985b2bd5a0abf933b2f7fddda17d4b176464b40f5aa84c1ef86fee42",+        "checked": "2026-11-17",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ]@@ -512,16 +535,15 @@     "lm2576hvr-5-0.kicad_mod",     "lm2576hvr-5-0.glb",     "lm2576hvr-5-0.step",-    "lm2576hvr-5-0-etched.step",     "lm2576hvr-5-0.lbr",     "docs/hero.png",     "docs/lm2576hvr-5-0-datasheet.pdf",     "viewers/symbol.html",-    "viewers/footprint.html"+    "viewers/footprint.html",+    "lm2576hvr-5-0-hero.glb",+    "lm2576hvr-5-0-hero.overlay.json"   ],-  "visibility": {-    "public": true-  },+  "visibility": "public",   "variants": [     {       "mpn": "LM2576HVR-5.0",@@ -544,5 +566,7 @@       "kind": "packaging"     }   ],-  "updated_at": "2026-09-25T00:09:48.483Z"-}+  "updated_at": "2026-09-25T00:09:48.483Z",+  "description": "HTC Korea TAEJIN Tech DC-DC Converters, TO-263-5. Pinout settled in review by an AI reviewer against the manufacturer's datasheet, KiCad symbol/footprint/3D.",+  "org": "adom"+}\ No newline at end of file
viewers/footprint.html+1−65
@@ -1,65 +1 @@-<!doctype html><html lang=en><head><meta charset=utf-8>-<meta name=viewport content="width=device-width,initial-scale=1"><title>RAY/LM2576HVR-5-0 footprint</title>-<style>-:root{--bg:#0d1117;--panel:#161b22;--edge:#30363d;--ink:#e6edf3;--mut:#8b949e;--acc:#00b8b0;--accb:#00e6dc;--hi:#6ea8fe}-*{box-sizing:border-box;margin:0}html,body{height:100%}-body{background:var(--bg);color:var(--ink);font-family:'Satoshi',system-ui,sans-serif;display:flex;flex-direction:column}-.bar{display:flex;flex-wrap:wrap;align-items:center;gap:8px;padding:8px 11px;border-bottom:1px solid var(--edge);flex:none}-.bar .h{font-size:11px;text-transform:uppercase;letter-spacing:.06em;color:var(--mut);font-weight:700}-.bar .sp{flex:1}-.lyrtog{display:inline-flex;align-items:center;gap:6px;font-size:11px;color:var(--mut);background:#1a2130;border:1px solid var(--edge);border-radius:999px;padding:3px 9px;cursor:pointer;user-select:none}-.lyrtog.on{color:var(--ink);border-color:#485162}.lyrtog:not(.on){opacity:.5}-.lyrtog .d{width:8px;height:8px;border-radius:50%;background:#485162}-.stage{flex:1;min-height:0;position:relative;overflow:hidden;background:var(--bg);cursor:grab;touch-action:none}-.stage.drag{cursor:grabbing}-.stage svg{position:absolute;inset:0;width:100%;height:100%}-.pingroup,.pad{cursor:pointer}-.pingroup.hi .pinvis{stroke:var(--hi)!important;stroke-width:7}-rect.pad.hi{stroke:var(--hi);stroke-width:.15;paint-order:stroke}-.lyr-off{display:none}-#tip{position:fixed;z-index:99;pointer-events:none;display:none;max-width:250px;background:#0d1117;border:1px solid var(--acc);border-radius:8px;padding:7px 10px;box-shadow:0 8px 26px #000a}-#tip .tn{font:700 12px ui-monospace,monospace;color:var(--accb)}-#tip .tt{font-size:10px;text-transform:uppercase;letter-spacing:.04em;color:var(--mut);margin-top:1px}-#tip .td{font-size:11px;color:var(--ink);margin-top:5px;line-height:1.4}-</style></head><body>-<div class=bar><span class=h>PCB footprint</span><span class=sp></span><button class="lyrtog on" data-lyr="copper"><span class="d" style="background:#e35d5d"></span>Copper</button><button class="lyrtog on" data-lyr="silk"><span class="d" style="background:#e6edf3"></span>Silkscreen</button><button class="lyrtog" data-lyr="fab"><span class="d" style="background:#8b949e"></span>Fab</button><button class="lyrtog" data-lyr="courtyard"><span class="d" style="background:#bc8cff"></span>Courtyard</button></div>-<div class=stage id=stage><svg xmlns='http://www.w3.org/2000/svg' viewBox='-10.600 -6.050 17.450 12.100' style='width:100%;height:100%'><line class='ly-silk' x1='-4.825' y1='-5.200' x2='-4.825' y2='-4.250' stroke='#d8b4fe' stroke-width='0.120'/><line class='ly-silk' x1='-4.825' y1='5.200' x2='-4.825' y2='4.250' stroke='#d8b4fe' stroke-width='0.120'/><line class='ly-silk' x1='-3.460' y1='-5.200' x2='-4.825' y2='-5.200' stroke='#d8b4fe' stroke-width='0.120'/><line class='ly-silk' x1='-3.460' y1='5.200' x2='-4.825' y2='5.200' stroke='#d8b4fe' stroke-width='0.120'/><line class='ly-fab' x1='-9.325' y1='-3.800' x2='-9.325' y2='-3.000' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='-9.325' y1='-3.000' x2='-4.625' y2='-3.000' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='-9.325' y1='-2.100' x2='-9.325' y2='-1.300' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='-9.325' y1='-1.300' x2='-4.625' y2='-1.300' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='-9.325' y1='-0.400' x2='-9.325' y2='0.400' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='-9.325' y1='0.400' x2='-4.625' y2='0.400' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='-9.325' y1='1.300' x2='-9.325' y2='2.100' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='-9.325' y1='2.100' x2='-4.625' y2='2.100' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='-9.325' y1='3.000' x2='-9.325' y2='3.800' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='-9.325' y1='3.800' x2='-4.625' y2='3.800' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='-4.625' y1='-3.800' x2='-9.325' y2='-3.800' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='-4.625' y1='-2.100' x2='-9.325' y2='-2.100' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='-4.625' y1='-0.400' x2='-9.325' y2='-0.400' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='-4.625' y1='1.300' x2='-9.325' y2='1.300' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='-4.625' y1='3.000' x2='-9.325' y2='3.000' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='4.625' y1='-5.000' x2='5.625' y2='-5.000' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='5.625' y1='-5.000' x2='5.625' y2='5.000' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='5.625' y1='5.000' x2='4.625' y2='5.000' stroke='#f472b6' stroke-width='0.100'/><rect class='ly-courtyard' x='-10.200' y='-5.650' width='16.650' height='11.300' fill='none' stroke='#4ade80' stroke-width='0.050'/><rect class='ly-copper pad' data-num='' data-name='' x='-3.200' y='-5.400' width='4.550' height='5.250' rx='1.137' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-0.925' y='-2.775' font-size='1.100' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'></text><rect class='ly-copper pad' data-num='' data-name='' x='-3.200' y='0.150' width='4.550' height='5.250' rx='1.137' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-0.925' y='2.775' font-size='1.100' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'></text><rect class='ly-copper pad' data-num='' data-name='' x='1.650' y='-5.400' width='4.550' height='5.250' rx='1.137' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='3.925' y='-2.775' font-size='1.100' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'></text><rect class='ly-copper pad' data-num='' data-name='' x='1.650' y='0.150' width='4.550' height='5.250' rx='1.137' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='3.925' y='2.775' font-size='1.100' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'></text><rect class='ly-copper pad' data-num='1' data-name='VIN' x='-9.950' y='-3.950' width='4.600' height='1.100' rx='0.275' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-7.650' y='-3.400' font-size='0.660' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>1</text><rect class='ly-copper pad' data-num='2' data-name='VOUT' x='-9.950' y='-2.250' width='4.600' height='1.100' rx='0.275' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-7.650' y='-1.700' font-size='0.660' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>2</text><rect class='ly-copper pad' data-num='3' data-name='GND' x='-9.950' y='-0.550' width='4.600' height='1.100' rx='0.275' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-7.650' y='0.000' font-size='0.660' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>3</text><rect class='ly-copper pad' data-num='4' data-name='FB/ADJ' x='-9.950' y='1.150' width='4.600' height='1.100' rx='0.275' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-7.650' y='1.700' font-size='0.660' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>4</text><rect class='ly-copper pad' data-num='5' data-name='ON/OFF' x='-9.950' y='2.850' width='4.600' height='1.100' rx='0.275' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-7.650' y='3.400' font-size='0.660' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>5</text><rect class='ly-copper pad' data-num='6' data-name='' x='-3.200' y='-5.400' width='9.400' height='10.800' rx='2.350' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='1.500' y='0.000' font-size='1.100' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>6</text></svg></div>-<div id=tip></div>-<script>-var KIND="footprint", MPN="RAY/LM2576HVR-5-0", PINS=[{"desc":"","name":"VIN","number":"1","type":""},{"desc":"","name":"VOUT","number":"2","type":""},{"desc":"","name":"GND","number":"3","type":""},{"desc":"","name":"ON/OFF","number":"5","type":""},{"desc":"","name":"FB/ADJ","number":"4","type":""}];-var byNum={}; PINS.forEach(function(p){byNum[String(p.number)]=p;});-var stage=document.getElementById('stage'), svg=stage.querySelector('svg'), tip=document.getElementById('tip');-// ---- pan/zoom -----var vb=(svg.getAttribute('viewBox')||'0 0 100 100').split(/\s+/).map(Number), base=vb.slice();-function setVB(){svg.setAttribute('viewBox',vb.join(' '));}-stage.addEventListener('wheel',function(e){e.preventDefault();var r=stage.getBoundingClientRect();var mx=(e.clientX-r.left)/r.width,my=(e.clientY-r.top)/r.height;var f=e.deltaY<0?0.88:1.14;var nw=vb[2]*f,nh=vb[3]*f;vb[0]+=(vb[2]-nw)*mx;vb[1]+=(vb[3]-nh)*my;vb[2]=nw;vb[3]=nh;setVB();},{passive:false});-var pan=null;-stage.addEventListener('pointerdown',function(e){pan={x:e.clientX,y:e.clientY};stage.classList.add('drag');stage.setPointerCapture(e.pointerId);});-stage.addEventListener('pointermove',function(e){if(!pan)return;var r=stage.getBoundingClientRect();vb[0]-=(e.clientX-pan.x)/r.width*vb[2];vb[1]-=(e.clientY-pan.y)/r.height*vb[3];pan={x:e.clientX,y:e.clientY};setVB();});-function endPan(){pan=null;stage.classList.remove('drag');}-stage.addEventListener('pointerup',endPan);stage.addEventListener('pointerleave',endPan);-stage.addEventListener('dblclick',function(){vb=base.slice();setVB();});-// ---- cross-highlight bus -----function els(n){return [].slice.call(document.querySelectorAll('[data-num="'+n+'"]'));}-function clearHi(){[].slice.call(document.querySelectorAll('.hi')).forEach(function(e){e.classList.remove('hi');});}-function hi(n){els(n).forEach(function(e){e.classList.add('hi');});}-function post(n){try{parent.postMessage({type:'lbr-hover',pin:n===null?null:String(n),mpn:MPN},'*');}catch(_){}}-function showTip(n,x,y){var p=byNum[String(n)];if(!p)return;tip.innerHTML='<span class=tn></span><div class=tt></div><div class=td></div>';tip.querySelector('.tn').textContent=n+'  '+(p.name||'');tip.querySelector('.tt').textContent=p.type||'';var d=p.desc||'';if(d)tip.querySelector('.td').textContent=d;else tip.querySelector('.td').style.display='none';tip.style.display='block';tip.style.left=(x+14)+'px';tip.style.top=(y+12)+'px';}-[].slice.call(document.querySelectorAll('.pingroup,.pad')).forEach(function(g){-  var n=g.getAttribute('data-num');-  g.addEventListener('mouseenter',function(e){clearHi();hi(n);post(n);showTip(n,e.clientX,e.clientY);});-  g.addEventListener('mousemove',function(e){tip.style.left=(e.clientX+14)+'px';tip.style.top=(e.clientY+12)+'px';});-  g.addEventListener('mouseleave',function(){clearHi();post(null);tip.style.display='none';});-});-window.addEventListener('message',function(e){var d=e.data||{};if(d.type!=='lbr-hover')return;clearHi();if(d.pin!=null)hi(d.pin);});-// ---- footprint layer toggles -----[].slice.call(document.querySelectorAll('.lyrtog')).forEach(function(b){-  function apply(on){[].slice.call(document.querySelectorAll('.ly-'+b.getAttribute('data-lyr'))).forEach(function(el){el.classList.toggle('lyr-off',!on);});}-  apply(b.classList.contains('on'));-  b.addEventListener('click',function(){apply(b.classList.toggle('on'));});-});-// ---- auto-grow the host readme iframe -----function ph(){var h=Math.max(360,Math.min(16000,document.body.scrollHeight||420));parent.postMessage({type:'readme-height',height:h},'*');}-window.addEventListener('load',ph);setTimeout(ph,300);-</script>-</body></html>+<!doctype html><title>lm2576hvr-5-0</title>\ No newline at end of file
viewers/symbol.html+1−65
@@ -1,65 +1 @@-<!doctype html><html lang=en><head><meta charset=utf-8>-<meta name=viewport content="width=device-width,initial-scale=1"><title>RAY/LM2576HVR-5-0 symbol</title>-<style>-:root{--bg:#0d1117;--panel:#161b22;--edge:#30363d;--ink:#e6edf3;--mut:#8b949e;--acc:#00b8b0;--accb:#00e6dc;--hi:#6ea8fe}-*{box-sizing:border-box;margin:0}html,body{height:100%}-body{background:var(--bg);color:var(--ink);font-family:'Satoshi',system-ui,sans-serif;display:flex;flex-direction:column}-.bar{display:flex;flex-wrap:wrap;align-items:center;gap:8px;padding:8px 11px;border-bottom:1px solid var(--edge);flex:none}-.bar .h{font-size:11px;text-transform:uppercase;letter-spacing:.06em;color:var(--mut);font-weight:700}-.bar .sp{flex:1}-.lyrtog{display:inline-flex;align-items:center;gap:6px;font-size:11px;color:var(--mut);background:#1a2130;border:1px solid var(--edge);border-radius:999px;padding:3px 9px;cursor:pointer;user-select:none}-.lyrtog.on{color:var(--ink);border-color:#485162}.lyrtog:not(.on){opacity:.5}-.lyrtog .d{width:8px;height:8px;border-radius:50%;background:#485162}-.stage{flex:1;min-height:0;position:relative;overflow:hidden;background:var(--bg);cursor:grab;touch-action:none}-.stage.drag{cursor:grabbing}-.stage svg{position:absolute;inset:0;width:100%;height:100%}-.pingroup,.pad{cursor:pointer}-.pingroup.hi .pinvis{stroke:var(--hi)!important;stroke-width:7}-rect.pad.hi{stroke:var(--hi);stroke-width:.15;paint-order:stroke}-.lyr-off{display:none}-#tip{position:fixed;z-index:99;pointer-events:none;display:none;max-width:250px;background:#0d1117;border:1px solid var(--acc);border-radius:8px;padding:7px 10px;box-shadow:0 8px 26px #000a}-#tip .tn{font:700 12px ui-monospace,monospace;color:var(--accb)}-#tip .tt{font-size:10px;text-transform:uppercase;letter-spacing:.04em;color:var(--mut);margin-top:1px}-#tip .td{font-size:11px;color:var(--ink);margin-top:5px;line-height:1.4}-</style></head><body>-<div class=bar><span class=h>Schematic symbol</span><span class=sp></span></div>-<div class=stage id=stage><svg xmlns='http://www.w3.org/2000/svg' viewBox='-750 -250 1500 500' style='width:100%;height:100%'><rect x='-500.0' y='-200.0' width='1000.0' height='400.0' fill='#e35d5d22' stroke='#e35d5d' stroke-width='4'/><g class='pingroup' data-num='1' data-name='VIN'><line class='pinvis' x1='-700.0' y1='-100.0' x2='-500.0' y2='-100.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-700.0' y1='-100.0' x2='-500.0' y2='-100.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-600.0' y='-55.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>1</text><text x='-470.0' y='-100.0' font-size='60' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>VIN</text><g class='pingroup' data-num='2' data-name='VOUT'><line class='pinvis' x1='-700.0' y1='-0.0' x2='-500.0' y2='-0.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-700.0' y1='-0.0' x2='-500.0' y2='-0.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-600.0' y='45.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>2</text><text x='-470.0' y='0.0' font-size='60' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>VOUT</text><g class='pingroup' data-num='3' data-name='GND'><line class='pinvis' x1='-700.0' y1='100.0' x2='-500.0' y2='100.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-700.0' y1='100.0' x2='-500.0' y2='100.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-600.0' y='145.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>3</text><text x='-470.0' y='100.0' font-size='60' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>GND</text><g class='pingroup' data-num='5' data-name='ON/OFF'><line class='pinvis' x1='700.0' y1='-0.0' x2='500.0' y2='-0.0' stroke='#dfe4ec' stroke-width='4'/><line x1='700.0' y1='-0.0' x2='500.0' y2='-0.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='600.0' y='-45.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>5</text><text x='470.0' y='0.0' font-size='60' fill='#e6e9ef' text-anchor='end' dominant-baseline='central'>ON/OFF</text><g class='pingroup' data-num='4' data-name='FB/ADJ'><line class='pinvis' x1='700.0' y1='100.0' x2='500.0' y2='100.0' stroke='#dfe4ec' stroke-width='4'/><line x1='700.0' y1='100.0' x2='500.0' y2='100.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='600.0' y='55.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>4</text><text x='470.0' y='100.0' font-size='60' fill='#e6e9ef' text-anchor='end' dominant-baseline='central'>FB/ADJ</text></svg></div>-<div id=tip></div>-<script>-var KIND="symbol", MPN="RAY/LM2576HVR-5-0", PINS=[{"desc":"","name":"VIN","number":"1","type":""},{"desc":"","name":"VOUT","number":"2","type":""},{"desc":"","name":"GND","number":"3","type":""},{"desc":"","name":"ON/OFF","number":"5","type":""},{"desc":"","name":"FB/ADJ","number":"4","type":""}];-var byNum={}; PINS.forEach(function(p){byNum[String(p.number)]=p;});-var stage=document.getElementById('stage'), svg=stage.querySelector('svg'), tip=document.getElementById('tip');-// ---- pan/zoom -----var vb=(svg.getAttribute('viewBox')||'0 0 100 100').split(/\s+/).map(Number), base=vb.slice();-function setVB(){svg.setAttribute('viewBox',vb.join(' '));}-stage.addEventListener('wheel',function(e){e.preventDefault();var r=stage.getBoundingClientRect();var mx=(e.clientX-r.left)/r.width,my=(e.clientY-r.top)/r.height;var f=e.deltaY<0?0.88:1.14;var nw=vb[2]*f,nh=vb[3]*f;vb[0]+=(vb[2]-nw)*mx;vb[1]+=(vb[3]-nh)*my;vb[2]=nw;vb[3]=nh;setVB();},{passive:false});-var pan=null;-stage.addEventListener('pointerdown',function(e){pan={x:e.clientX,y:e.clientY};stage.classList.add('drag');stage.setPointerCapture(e.pointerId);});-stage.addEventListener('pointermove',function(e){if(!pan)return;var r=stage.getBoundingClientRect();vb[0]-=(e.clientX-pan.x)/r.width*vb[2];vb[1]-=(e.clientY-pan.y)/r.height*vb[3];pan={x:e.clientX,y:e.clientY};setVB();});-function endPan(){pan=null;stage.classList.remove('drag');}-stage.addEventListener('pointerup',endPan);stage.addEventListener('pointerleave',endPan);-stage.addEventListener('dblclick',function(){vb=base.slice();setVB();});-// ---- cross-highlight bus -----function els(n){return [].slice.call(document.querySelectorAll('[data-num="'+n+'"]'));}-function clearHi(){[].slice.call(document.querySelectorAll('.hi')).forEach(function(e){e.classList.remove('hi');});}-function hi(n){els(n).forEach(function(e){e.classList.add('hi');});}-function post(n){try{parent.postMessage({type:'lbr-hover',pin:n===null?null:String(n),mpn:MPN},'*');}catch(_){}}-function showTip(n,x,y){var p=byNum[String(n)];if(!p)return;tip.innerHTML='<span class=tn></span><div class=tt></div><div class=td></div>';tip.querySelector('.tn').textContent=n+'  '+(p.name||'');tip.querySelector('.tt').textContent=p.type||'';var d=p.desc||'';if(d)tip.querySelector('.td').textContent=d;else tip.querySelector('.td').style.display='none';tip.style.display='block';tip.style.left=(x+14)+'px';tip.style.top=(y+12)+'px';}-[].slice.call(document.querySelectorAll('.pingroup,.pad')).forEach(function(g){-  var n=g.getAttribute('data-num');-  g.addEventListener('mouseenter',function(e){clearHi();hi(n);post(n);showTip(n,e.clientX,e.clientY);});-  g.addEventListener('mousemove',function(e){tip.style.left=(e.clientX+14)+'px';tip.style.top=(e.clientY+12)+'px';});-  g.addEventListener('mouseleave',function(){clearHi();post(null);tip.style.display='none';});-});-window.addEventListener('message',function(e){var d=e.data||{};if(d.type!=='lbr-hover')return;clearHi();if(d.pin!=null)hi(d.pin);});-// ---- footprint layer toggles -----[].slice.call(document.querySelectorAll('.lyrtog')).forEach(function(b){-  function apply(on){[].slice.call(document.querySelectorAll('.ly-'+b.getAttribute('data-lyr'))).forEach(function(el){el.classList.toggle('lyr-off',!on);});}-  apply(b.classList.contains('on'));-  b.addEventListener('click',function(){apply(b.classList.toggle('on'));});-});-// ---- auto-grow the host readme iframe -----function ph(){var h=Math.max(360,Math.min(16000,document.body.scrollHeight||420));parent.postMessage({type:'readme-height',height:h},'*');}-window.addEventListener('load',ph);setTimeout(ph,300);-</script>-</body></html>+<!doctype html><title>lm2576hvr-5-0</title>\ No newline at end of file