main
History Download
Ray Publish 0.1.0 ed80c69

LM2575S-3.3RG

HANSCHIP semiconductor · DC-DC Converters · TO-263-5

LM2575S-3.3RG from HANSCHIP semiconductor, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Unregulated input supply pin, rated to a maximum of 40 V for LM2575 (55 V for LM2575HV), with a 6 V minimum for the 3.3 V version.
2 Output output Switching output of the internal power transistor with 2 A guaranteed output current, and output voltage to ground limited to -1 V (steady state).
3 Ground power_in Ground reference pin for the regulator; the package tab is also ground.
4 Feedback input Feedback sense input to the regulator; for the fixed 3.3 V version it connects to the output through the internal divider.
5 ON/OFF input Active-low shutdown input with TTL-compatible thresholds (VIH 2.2 V min, VIL 1.0 V max) that puts the device in standby with about 50 uA typical supply current.
6 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer HANSCHIP semiconductor
Package TO-263-5
Category Power Supply Chip
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output voltage (VIN = 12V, I load = 0.5A) VOUT 3.234 3.3 3.366 V VIN = 12V, I load = 0.5A 5
Output voltage LM2575, TJ = 25°C VOUT 3.168 3.3 3.432 V 6V ≦ VIN ≦ 40V, 0.5A ≦ I load ≦ 2A 5
Output voltage LM2575, full operating junction temperature range VOUT 3.135 3.3 3.465 V 6V ≦ VIN ≦ 40V, 0.5A ≦ I load ≦ 2A 5
Oscillator frequency, TJ = 25°C fO 47 52 58 kHz VIN = 12V, I load = 500 mA (section default) 7
Oscillator frequency, full operating junction temperature range fO 42 52 63 kHz VIN = 12V, I load = 500 mA (section default) 7
Saturation voltage, TJ = 25°C VSAT 1.4 1.8 V IOUT = 2A (note 4) 7
Saturation voltage, full operating junction temperature range VSAT 1.4 2 V IOUT = 2A (note 4) 7
Maximum duty cycle (ON) DC 93 98 % Feedback pin disconnected from output, tied to 0V (note 5) 7
Current limit, TJ = 25°C ICL 4.2 5.8 6.9 A Output source current (notes 4, 11) 7
Current limit, full operating junction temperature range ICL 3.5 5.8 7.5 A Output source current (notes 4, 11) 7
Output leakage current IL 7.5 mA Output = 0V; VIN = 40V; feedback tied to +12V (notes 6, 7) 7
Output leakage current IL 2 30 mA Output = -1V; VIN = 40V; feedback tied to +12V (notes 6, 7) 7
Quiescent current IQ 5 10 mA Note 6 7
Standby quiescent current ISTBY 50 200 µA ON/OFF pin = 5V (off) 7
ON/OFF control logic input high level, TJ = 25°C VIH 2.2 1.4 V VOUT = 0V 7
ON/OFF control logic input high level, full operating junction temperature range VIH 2.4 1.4 V VOUT = 0V 7
ON/OFF control logic input low level, TJ = 25°C VIL 1.2 1 V VOUT = nominal input voltage 7
ON/OFF control logic input low level, full operating junction temperature range VIL 1.2 0.8 V VOUT = nominal input voltage 7
ON/OFF control input current (off) IIH 12 30 µA ON/OFF control off 7
ON/OFF control input current (on) IIL 0 10 µA ON/OFF control = 0V (on) 7
Maximum supply voltage LM2575 VIN 40 V 4
ON/OFF pin input voltage VON_OFF -0.3 V -0.3 ≦ V ≦ +VIN 4
Output voltage to ground (steady state) -1 V Steady state 4
Storage temperature range TSTG -65 150 °C 4
Maximum junction temperature TJ 150 °C 4
ESD rating (minimum) ESD 2 kV C = 100 pF, R = 1.5 kΩ 4
Lead temperature (soldering) TLEAD 245 °C Soldering, 10 s 4
Supply voltage LM2575 (recommended) VIN 40 V 4
Operating junction temperature range TA -40 125 °C 4
Thermal resistance, junction to ambient (TO-263, 0.5 sq in copper) θJA 50 °C/W S package, copper area 0.5 sq in (note 10) 7
Thermal resistance, junction to ambient (TO-263, 1 sq in copper) θJA 37 °C/W S package, copper area 1 sq in (note 10) 7
Thermal resistance, junction to ambient (TO-263, ≥1.6 sq in copper) θJA 32 °C/W S package, copper area 1.6 sq in or more (note 10) 7

CAD (KiCad official)

  • Symbol: LM2575S-3.3RG
  • Footprint: Package_TO_SOT_SMD:TO-263-5_TabPin6
  • 3D model: TO-263-5 (KiCad packages3D, STEP)
  • 3D model files: lm2575s-3-3rg-etched.step / lm2575s-3-3rg-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm2575s-3-3rg.step / lm2575s-3-3rg.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HANSCHIP semiconductor datasheet (13 pp, sha256 c889c4eff4be9664, retrieved 2026-10-29, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF