Generated by kicad-footprint-generator · KiCad file format 20260206
LM2575S-3.3RG
HANSCHIP semiconductor · DC-DC Converters · TO-263-5
LM2575S-3.3RG from HANSCHIP semiconductor, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Unregulated input supply pin, rated to a maximum of 40 V for LM2575 (55 V for LM2575HV), with a 6 V minimum for the 3.3 V version. |
| 2 | Output | output | Switching output of the internal power transistor with 2 A guaranteed output current, and output voltage to ground limited to -1 V (steady state). |
| 3 | Ground | power_in | Ground reference pin for the regulator; the package tab is also ground. |
| 4 | Feedback | input | Feedback sense input to the regulator; for the fixed 3.3 V version it connects to the output through the internal divider. |
| 5 | ON/OFF | input | Active-low shutdown input with TTL-compatible thresholds (VIH 2.2 V min, VIL 1.0 V max) that puts the device in standby with about 50 uA typical supply current. |
| 6 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HANSCHIP semiconductor |
| Package | TO-263-5 |
| Category | Power Supply Chip |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage (VIN = 12V, I load = 0.5A) | VOUT | 3.234 | 3.3 | 3.366 | V | VIN = 12V, I load = 0.5A | 5 |
| Output voltage LM2575, TJ = 25°C | VOUT | 3.168 | 3.3 | 3.432 | V | 6V ≦ VIN ≦ 40V, 0.5A ≦ I load ≦ 2A | 5 |
| Output voltage LM2575, full operating junction temperature range | VOUT | 3.135 | 3.3 | 3.465 | V | 6V ≦ VIN ≦ 40V, 0.5A ≦ I load ≦ 2A | 5 |
| Oscillator frequency, TJ = 25°C | fO | 47 | 52 | 58 | kHz | VIN = 12V, I load = 500 mA (section default) | 7 |
| Oscillator frequency, full operating junction temperature range | fO | 42 | 52 | 63 | kHz | VIN = 12V, I load = 500 mA (section default) | 7 |
| Saturation voltage, TJ = 25°C | VSAT | 1.4 | 1.8 | V | IOUT = 2A (note 4) | 7 | |
| Saturation voltage, full operating junction temperature range | VSAT | 1.4 | 2 | V | IOUT = 2A (note 4) | 7 | |
| Maximum duty cycle (ON) | DC | 93 | 98 | % | Feedback pin disconnected from output, tied to 0V (note 5) | 7 | |
| Current limit, TJ = 25°C | ICL | 4.2 | 5.8 | 6.9 | A | Output source current (notes 4, 11) | 7 |
| Current limit, full operating junction temperature range | ICL | 3.5 | 5.8 | 7.5 | A | Output source current (notes 4, 11) | 7 |
| Output leakage current | IL | 7.5 | mA | Output = 0V; VIN = 40V; feedback tied to +12V (notes 6, 7) | 7 | ||
| Output leakage current | IL | 2 | 30 | mA | Output = -1V; VIN = 40V; feedback tied to +12V (notes 6, 7) | 7 | |
| Quiescent current | IQ | 5 | 10 | mA | Note 6 | 7 | |
| Standby quiescent current | ISTBY | 50 | 200 | µA | ON/OFF pin = 5V (off) | 7 | |
| ON/OFF control logic input high level, TJ = 25°C | VIH | 2.2 | 1.4 | V | VOUT = 0V | 7 | |
| ON/OFF control logic input high level, full operating junction temperature range | VIH | 2.4 | 1.4 | V | VOUT = 0V | 7 | |
| ON/OFF control logic input low level, TJ = 25°C | VIL | 1.2 | 1 | V | VOUT = nominal input voltage | 7 | |
| ON/OFF control logic input low level, full operating junction temperature range | VIL | 1.2 | 0.8 | V | VOUT = nominal input voltage | 7 | |
| ON/OFF control input current (off) | IIH | 12 | 30 | µA | ON/OFF control off | 7 | |
| ON/OFF control input current (on) | IIL | 0 | 10 | µA | ON/OFF control = 0V (on) | 7 | |
| Maximum supply voltage LM2575 | VIN | 40 | V | 4 | |||
| ON/OFF pin input voltage | VON_OFF | -0.3 | V | -0.3 ≦ V ≦ +VIN | 4 | ||
| Output voltage to ground (steady state) | -1 | V | Steady state | 4 | |||
| Storage temperature range | TSTG | -65 | 150 | °C | 4 | ||
| Maximum junction temperature | TJ | 150 | °C | 4 | |||
| ESD rating (minimum) | ESD | 2 | kV | C = 100 pF, R = 1.5 kΩ | 4 | ||
| Lead temperature (soldering) | TLEAD | 245 | °C | Soldering, 10 s | 4 | ||
| Supply voltage LM2575 (recommended) | VIN | 40 | V | 4 | |||
| Operating junction temperature range | TA | -40 | 125 | °C | 4 | ||
| Thermal resistance, junction to ambient (TO-263, 0.5 sq in copper) | θJA | 50 | °C/W | S package, copper area 0.5 sq in (note 10) | 7 | ||
| Thermal resistance, junction to ambient (TO-263, 1 sq in copper) | θJA | 37 | °C/W | S package, copper area 1 sq in (note 10) | 7 | ||
| Thermal resistance, junction to ambient (TO-263, ≥1.6 sq in copper) | θJA | 32 | °C/W | S package, copper area 1.6 sq in or more (note 10) | 7 |
CAD (KiCad official)
- Symbol:
LM2575S-3.3RG - Footprint:
Package_TO_SOT_SMD:TO-263-5_TabPin6 - 3D model: TO-263-5 (KiCad packages3D, STEP)
- 3D model files:
lm2575s-3-3rg-etched.step/lm2575s-3-3rg-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm2575s-3-3rg.step/lm2575s-3-3rg.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HANSCHIP semiconductor datasheet (13 pp, sha256
c889c4eff4be9664, retrieved 2026-10-29, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).