main
Ray
Publish 0.1.0
0ec24b3
LM2575-5.0YN
Microchip Tech · DC-DC Converters · PDIP-16
LM2575-5.0YN from Microchip Tech, in a PDIP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection. |
| 2 | NC | unconnected | No internal connection. |
| 3 | OUT | output | Emitter of the internal 1A power switch that drives the external inductor and catch diode; the output must not go below -1V steady state. |
| 4 | NC | unconnected | No internal connection. |
| 5 | GND | power_in | Ground pin of the regulator. |
| 6 | NC | unconnected | No internal connection. |
| 7 | FB | input | Feedback input from the output voltage; the internal reference is 1.23V and the pin is rated to 1kV ESD. |
| 8 | NC | unconnected | No internal connection. |
| 9 | ON/OFF | input | Shutdown input rated -0.3V to +40V; pulling it to 5V turns the regulator off with a standby current of 50µA typ and 200µA max. |
| 10 | NC | unconnected | No internal connection. |
| 11 | GND | power_in | Ground pin of the regulator, one of four adjacent GND pins (11 to 14). |
| 12 | GND | power_in | Ground pin of the regulator, one of four adjacent GND pins (11 to 14). |
| 13 | GND | power_in | Ground pin of the regulator, one of four adjacent GND pins (11 to 14). |
| 14 | GND | power_in | Ground pin of the regulator, one of four adjacent GND pins (11 to 14). |
| 15 | NC | unconnected | No internal connection. |
| 16 | VIN | power_in | Unregulated supply input, operating up to 40V (absolute maximum 45V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | PDIP-16 |
| Category | Power Supply Chip |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage | VOUT | 4.9 | 5 | 5.1 | V | VIN = 12V, ILOAD = 0.2A, VOUT = 5V; 25C | 4 |
| Output Voltage (line/load, full temp) | VOUT | 4.75 | 5 | 5.25 | V | 0.2A ≤ ILOAD ≤ 1A, 8V ≤ VIN ≤ 40V, VOUT = 5V; over temperature extremes (25C limits 4.800/5.200) | 4 |
| Efficiency | η | 82 | % | VIN = 12V, ILOAD = 1A | 4 | ||
| Oscillator Frequency | fO | 42 | 52 | 63 | kHz | over temperature extremes (25C limits 47/58) | 5 |
| Saturation Voltage | VSAT | 0.9 | 1.4 | V | IOUT = 1A (Note 4); full temp limit (25C 1.2) | 5 | |
| Max Duty Cycle (ON) | DC | 93 | 98 | % | Note 5 | 5 | |
| Current Limit | ICL | 1.3 | 2.2 | 3.2 | A | Peak current, tON ≤ 3µs (Note 4); full temp (25C 1.7/3.0) | 5 |
| Output Leakage Current | IL | 2 | 30 | mA | VIN = 40V, Output = -1V (Note 6); max also 2 mA typ at Output = 0V | 5 | |
| Quiescent Current | IQ | 5 | 10 | mA | Note 6 | 5 | |
| Standby Quiescent Current | ISTBY | 50 | 200 | µA | ON/OFF Pin = 5V (OFF) | 5 | |
| ON/OFF Logic Input High Level | VIH | 2.2 | 1.4 | V | VOUT = 0V; full temp min 2.4 | 5 | |
| ON/OFF Logic Input Low Level | VIL | 1.2 | 0.8 | V | VOUT = 5V; full temp max 0.8 (25C 1.0) | 5 | |
| ON/OFF Pin Current (OFF) | IIH | 4 | 30 | µA | ON/OFF Pin = 5V (OFF) | 5 | |
| ON/OFF Pin Current (ON) | IIL | 0.01 | 10 | µA | ON/OFF Pin = 0V (ON) | 5 | |
| Maximum Supply Voltage | VIN | 45 | V | 4 | |||
| ON/OFF Pin Input Voltage | -0.3 | 40 | V | 4 | |||
| Output Voltage to Ground (Steady State) | -1 | V | 4 | ||||
| Maximum Junction Temperature | TJ | 150 | °C | 4 | |||
| Lead Temperature | 260 | °C | soldering, 10 sec | 4 | |||
| Storage Temperature | Ts | -65 | 150 | °C | 4 | ||
| ESD Rating | 2 | kV | C = 100pF, R = 1.5kΩ; FB pin 1kV | 4 | |||
| Supply Voltage | VIN | 40 | V | Operating Ratings | 4 | ||
| Junction Temperature Range | TJ | -40 | 125 | °C | 4 | ||
| Thermal Resistance, Junction to Ambient, N Package | θJA | 85 | °C/W | Note 9, ~1 sq inch PCB copper | 5 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | board containing approximately 4 square inches of copper area surrounding the leads. | 5 |
CAD (KiCad official)
- Symbol:
LM2575-5.0YN - Footprint:
Package_DIP:DIP-16_W7.62mm - 3D model: PDIP-16 (KiCad packages3D, STEP)
- 3D model files:
lm2575-5-0yn-etched.step/lm2575-5-0yn-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm2575-5-0yn.step/lm2575-5-0yn.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (12 pp, sha256
b30e660d51aacbe5, retrieved 2026-10-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LM2575-5.0YN
**Microchip Tech** · DC-DC Converters · PDIP-16
LM2575-5.0YN from Microchip Tech, in a PDIP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection. |
| 2 | NC | unconnected | No internal connection. |
| 3 | OUT | output | Emitter of the internal 1A power switch that drives the external inductor and catch diode; the output must not go below -1V steady state. |
| 4 | NC | unconnected | No internal connection. |
| 5 | GND | power_in | Ground pin of the regulator. |
| 6 | NC | unconnected | No internal connection. |
| 7 | FB | input | Feedback input from the output voltage; the internal reference is 1.23V and the pin is rated to 1kV ESD. |
| 8 | NC | unconnected | No internal connection. |
| 9 | ON/OFF | input | Shutdown input rated -0.3V to +40V; pulling it to 5V turns the regulator off with a standby current of 50µA typ and 200µA max. |
| 10 | NC | unconnected | No internal connection. |
| 11 | GND | power_in | Ground pin of the regulator, one of four adjacent GND pins (11 to 14). |
| 12 | GND | power_in | Ground pin of the regulator, one of four adjacent GND pins (11 to 14). |
| 13 | GND | power_in | Ground pin of the regulator, one of four adjacent GND pins (11 to 14). |
| 14 | GND | power_in | Ground pin of the regulator, one of four adjacent GND pins (11 to 14). |
| 15 | NC | unconnected | No internal connection. |
| 16 | VIN | power_in | Unregulated supply input, operating up to 40V (absolute maximum 45V). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | PDIP-16 |
| Category | Power Supply Chip |
| Pins | 16 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage | VOUT | 4.9 | 5 | 5.1 | V | VIN = 12V, ILOAD = 0.2A, VOUT = 5V; 25C | 4 |
| Output Voltage (line/load, full temp) | VOUT | 4.75 | 5 | 5.25 | V | 0.2A ≤ ILOAD ≤ 1A, 8V ≤ VIN ≤ 40V, VOUT = 5V; over temperature extremes (25C limits 4.800/5.200) | 4 |
| Efficiency | η | | 82 | | % | VIN = 12V, ILOAD = 1A | 4 |
| Oscillator Frequency | fO | 42 | 52 | 63 | kHz | over temperature extremes (25C limits 47/58) | 5 |
| Saturation Voltage | VSAT | | 0.9 | 1.4 | V | IOUT = 1A (Note 4); full temp limit (25C 1.2) | 5 |
| Max Duty Cycle (ON) | DC | 93 | 98 | | % | Note 5 | 5 |
| Current Limit | ICL | 1.3 | 2.2 | 3.2 | A | Peak current, tON ≤ 3µs (Note 4); full temp (25C 1.7/3.0) | 5 |
| Output Leakage Current | IL | | 2 | 30 | mA | VIN = 40V, Output = -1V (Note 6); max also 2 mA typ at Output = 0V | 5 |
| Quiescent Current | IQ | | 5 | 10 | mA | Note 6 | 5 |
| Standby Quiescent Current | ISTBY | | 50 | 200 | µA | ON/OFF Pin = 5V (OFF) | 5 |
| ON/OFF Logic Input High Level | VIH | 2.2 | 1.4 | | V | VOUT = 0V; full temp min 2.4 | 5 |
| ON/OFF Logic Input Low Level | VIL | | 1.2 | 0.8 | V | VOUT = 5V; full temp max 0.8 (25C 1.0) | 5 |
| ON/OFF Pin Current (OFF) | IIH | | 4 | 30 | µA | ON/OFF Pin = 5V (OFF) | 5 |
| ON/OFF Pin Current (ON) | IIL | | 0.01 | 10 | µA | ON/OFF Pin = 0V (ON) | 5 |
| Maximum Supply Voltage | VIN | | | 45 | V | | 4 |
| ON/OFF Pin Input Voltage | | -0.3 | | 40 | V | | 4 |
| Output Voltage to Ground (Steady State) | | -1 | | | V | | 4 |
| Maximum Junction Temperature | TJ | | | 150 | °C | | 4 |
| Lead Temperature | | | | 260 | °C | soldering, 10 sec | 4 |
| Storage Temperature | Ts | -65 | | 150 | °C | | 4 |
| ESD Rating | | | | 2 | kV | C = 100pF, R = 1.5kΩ; FB pin 1kV | 4 |
| Supply Voltage | VIN | | | 40 | V | Operating Ratings | 4 |
| Junction Temperature Range | TJ | -40 | | 125 | °C | | 4 |
| Thermal Resistance, Junction to Ambient, N Package | θJA | | 85 | | °C/W | Note 9, ~1 sq inch PCB copper | 5 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | | board containing approximately 4 square inches of copper area surrounding the leads. | 5 |
## CAD (KiCad official)
- Symbol: `LM2575-5.0YN`
- Footprint: `Package_DIP:DIP-16_W7.62mm`
- 3D model: PDIP-16 (KiCad packages3D, STEP)
- 3D model files: `lm2575-5-0yn-etched.step` / `lm2575-5-0yn-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm2575-5-0yn.step` / `lm2575-5-0yn.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/lm2575-5-0yn-datasheet.pdf) (12 pp, sha256 `b30e660d51aacbe5`, retrieved 2026-10-27, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lm2575-5-0yn-datasheet.pdf)