Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LM2575-5.0YN

Microchip Tech · DC-DC Converters · PDIP-16

LM2575-5.0YN from Microchip Tech, in a PDIP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected No internal connection.
2 NC unconnected No internal connection.
3 OUT output Emitter of the internal 1A power switch that drives the external inductor and catch diode; the output must not go below -1V steady state.
4 NC unconnected No internal connection.
5 GND power_in Ground pin of the regulator.
6 NC unconnected No internal connection.
7 FB input Feedback input from the output voltage; the internal reference is 1.23V and the pin is rated to 1kV ESD.
8 NC unconnected No internal connection.
9 ON/OFF input Shutdown input rated -0.3V to +40V; pulling it to 5V turns the regulator off with a standby current of 50µA typ and 200µA max.
10 NC unconnected No internal connection.
11 GND power_in Ground pin of the regulator, one of four adjacent GND pins (11 to 14).
12 GND power_in Ground pin of the regulator, one of four adjacent GND pins (11 to 14).
13 GND power_in Ground pin of the regulator, one of four adjacent GND pins (11 to 14).
14 GND power_in Ground pin of the regulator, one of four adjacent GND pins (11 to 14).
15 NC unconnected No internal connection.
16 VIN power_in Unregulated supply input, operating up to 40V (absolute maximum 45V).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package PDIP-16
Category Power Supply Chip
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage VOUT 4.9 5 5.1 V VIN = 12V, ILOAD = 0.2A, VOUT = 5V; 25C 4
Output Voltage (line/load, full temp) VOUT 4.75 5 5.25 V 0.2A ≤ ILOAD ≤ 1A, 8V ≤ VIN ≤ 40V, VOUT = 5V; over temperature extremes (25C limits 4.800/5.200) 4
Efficiency η 82 % VIN = 12V, ILOAD = 1A 4
Oscillator Frequency fO 42 52 63 kHz over temperature extremes (25C limits 47/58) 5
Saturation Voltage VSAT 0.9 1.4 V IOUT = 1A (Note 4); full temp limit (25C 1.2) 5
Max Duty Cycle (ON) DC 93 98 % Note 5 5
Current Limit ICL 1.3 2.2 3.2 A Peak current, tON ≤ 3µs (Note 4); full temp (25C 1.7/3.0) 5
Output Leakage Current IL 2 30 mA VIN = 40V, Output = -1V (Note 6); max also 2 mA typ at Output = 0V 5
Quiescent Current IQ 5 10 mA Note 6 5
Standby Quiescent Current ISTBY 50 200 µA ON/OFF Pin = 5V (OFF) 5
ON/OFF Logic Input High Level VIH 2.2 1.4 V VOUT = 0V; full temp min 2.4 5
ON/OFF Logic Input Low Level VIL 1.2 0.8 V VOUT = 5V; full temp max 0.8 (25C 1.0) 5
ON/OFF Pin Current (OFF) IIH 4 30 µA ON/OFF Pin = 5V (OFF) 5
ON/OFF Pin Current (ON) IIL 0.01 10 µA ON/OFF Pin = 0V (ON) 5
Maximum Supply Voltage VIN 45 V 4
ON/OFF Pin Input Voltage -0.3 40 V 4
Output Voltage to Ground (Steady State) -1 V 4
Maximum Junction Temperature TJ 150 °C 4
Lead Temperature 260 °C soldering, 10 sec 4
Storage Temperature Ts -65 150 °C 4
ESD Rating 2 kV C = 100pF, R = 1.5kΩ; FB pin 1kV 4
Supply Voltage VIN 40 V Operating Ratings 4
Junction Temperature Range TJ -40 125 °C 4
Thermal Resistance, Junction to Ambient, N Package θJA 85 °C/W Note 9, ~1 sq inch PCB copper 5

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper board containing approximately 4 square inches of copper area surrounding the leads. 5

CAD (KiCad official)

  • Symbol: LM2575-5.0YN
  • Footprint: Package_DIP:DIP-16_W7.62mm
  • 3D model: PDIP-16 (KiCad packages3D, STEP)
  • 3D model files: lm2575-5-0yn-etched.step / lm2575-5-0yn-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm2575-5-0yn.step / lm2575-5-0yn.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (12 pp, sha256 b30e660d51aacbe5, retrieved 2026-10-27, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF