main
Ray
Publish 0.1.0
0fcabef
LM2574HVM-12
Texas Instruments · DC-DC Converters · SOIC-14-300mil
LM2574HVM-12 from Texas Instruments, in a SOIC-14-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection, but must be soldered to PCB for best heat transfer. |
| 2 | NC | unconnected | No internal connection, but must be soldered to PCB for best heat transfer. |
| 3 | FB | input | Feedback sense input pin. Connect to the midpoint of feedback divider to set VOUT for ADJ version or connect this pin directly to the output capacitor for a fixed output version. |
| 4 | SIG_GND | power_in | Signal ground pin. Ground reference for internal references and logic. Connect to system ground. |
| 5 | ON/OFF | input | Enable input to the voltage regulator. High = OFF and low = ON. Connect to GND to enable the voltage regulator. Do not leave this pin float. |
| 6 | PWR_GND | power_in | Power ground pins. Connect to system ground and SIF GND, ground pins of CIN and COUT. Path to CIN must be as short as possible. |
| 7 | NC | unconnected | No internal connection, but must be soldered to PCB for best heat transfer. |
| 8 | NC | unconnected | No internal connection, but must be soldered to PCB for best heat transfer. |
| 9 | NC | unconnected | No internal connection, but must be soldered to PCB for best heat transfer. |
| 10 | VIN | power_in | Supply input pin to collector pin of high-side transistor. Connect to power supply and input bypass capacitors CIN. Path from VIN pin to high frequency bypass CIN and PWR GND must be as short as possible. |
| 11 | NC | unconnected | No internal connection, but must be soldered to PCB for best heat transfer. |
| 12 | OUTPUT | output | Emitter pin of the power transistor. This is a switching node. Attached this pin to an inductor and the cathode of the external diode. |
| 13 | NC | unconnected | No internal connection, but must be soldered to PCB for best heat transfer. |
| 14 | NC | unconnected | No internal connection, but must be soldered to PCB for best heat transfer. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-14-300mil |
| Category | Power Supply Chip |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage | VOUT | 11.52 | 12 | 12.54 | V | LM2574HV, 15 V ≤ VIN ≤ 60 V, 0.1 A ≤ ILOAD ≤ 0.5 A, TJ = 25°C | 6 |
| Output voltage | VOUT | 11.4 | 12.66 | V | LM2574HV, 15 V ≤ VIN ≤ 60 V, 0.1 A ≤ ILOAD ≤ 0.5 A, −40°C ≤ TJ ≤ 125°C | 6 | |
| Output voltage | VOUT | 11.76 | 12 | 12.24 | V | VIN = 25 V, ILOAD = 100 mA | 6 |
| Oscillator frequency | fO | 47 | 52 | 58 | kHz | TJ = 25°C | 5 |
| Oscillator frequency | fO | 42 | 63 | kHz | −40°C < TJ < 125°C | 5 | |
| Saturation voltage | VSAT | 0.9 | 1.2 | V | IOUT = 0.5 A, TJ = 25°C | 5 | |
| Saturation voltage | VSAT | 1.4 | V | IOUT = 0.5 A, −40°C < TJ < 125°C | 5 | ||
| Current limit | ICL | 0.7 | 1 | 1.6 | A | Peak current, TJ = 25°C | 5 |
| Current limit | ICL | 0.65 | 1.8 | A | Peak current, −40°C < TJ < 125°C | 5 | |
| Current output leakage | IL | 7.5 | 30 | mA | Output = -1 V | 5 | |
| Quiescent current | IQ | 5 | 10 | mA | See note (5) | 5 | |
| Standby quiescent current | ISTBY | 50 | 200 | μA | ON/OFF pin = 5 V (OFF) | 5 | |
| ON/OFF pin input current | IH | 12 | 30 | μA | ON/OFF pin = 5 V (OFF) | 5 | |
| ON/OFF pin input current | IIL | 0 | 10 | μA | ON/OFF pin = 0 V (ON) | 5 | |
| Maximum supply voltage | 63 | V | LM2574HV | 4 | |||
| ON/OFF pin input voltage | -0.3 | V | Upper limit printed as VIN | 4 | |||
| Output voltage to ground, steady-state | -1 | V | 4 | ||||
| Lead temperature, soldering | 260 | °C | 10 s | 4 | |||
| Maximum junction temperature | 150 | °C | 4 | ||||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Supply voltage | 60 | V | LM2574HV | 4 | |||
| Temperature range, junction | TJ | -40 | 125 | °C | 4 | ||
| Junction-to-ambient thermal resistance (SOIC) | RθJA | 77.1 | °C/W | SOIC (NPA) 14 pins, 4-layer JEDEC board | 4 | ||
| Junction-to-case (top) thermal resistance (SOIC) | RθJC(top) | 29.2 | °C/W | SOIC (NPA) 14 pins, 4-layer JEDEC board | 4 | ||
| Junction-to-board thermal resistance (SOIC) | RθJB | 33.3 | °C/W | SOIC (NPA) 14 pins, 4-layer JEDEC board | 4 | ||
| Efficiency | η | 88 | % | VIN = 15 V, ILOAD = 0.5 A | 6 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | replacement for popular three-terminal linear regulators. Because of its high efficiency, the copper | 1 |
CAD (KiCad official)
- Symbol:
LM2574HVM-12 - Footprint:
Package_SO:SOIC-14_3.9x8.7mm_P1.27mm - 3D model: SOIC-14-300mil (KiCad packages3D, STEP)
- 3D model files:
lm2574hvm-12-etched.step/lm2574hvm-12-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm2574hvm-12.step/lm2574hvm-12.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (42 pp, sha256
14799833368eb5fa, retrieved 2026-11-06, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LM2574HVM-12
**Texas Instruments** · DC-DC Converters · SOIC-14-300mil
LM2574HVM-12 from Texas Instruments, in a SOIC-14-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection, but must be soldered to PCB for best heat transfer. |
| 2 | NC | unconnected | No internal connection, but must be soldered to PCB for best heat transfer. |
| 3 | FB | input | Feedback sense input pin. Connect to the midpoint of feedback divider to set VOUT for ADJ version or connect this pin directly to the output capacitor for a fixed output version. |
| 4 | SIG_GND | power_in | Signal ground pin. Ground reference for internal references and logic. Connect to system ground. |
| 5 | ON/OFF | input | Enable input to the voltage regulator. High = OFF and low = ON. Connect to GND to enable the voltage regulator. Do not leave this pin float. |
| 6 | PWR_GND | power_in | Power ground pins. Connect to system ground and SIF GND, ground pins of CIN and COUT. Path to CIN must be as short as possible. |
| 7 | NC | unconnected | No internal connection, but must be soldered to PCB for best heat transfer. |
| 8 | NC | unconnected | No internal connection, but must be soldered to PCB for best heat transfer. |
| 9 | NC | unconnected | No internal connection, but must be soldered to PCB for best heat transfer. |
| 10 | VIN | power_in | Supply input pin to collector pin of high-side transistor. Connect to power supply and input bypass capacitors CIN. Path from VIN pin to high frequency bypass CIN and PWR GND must be as short as possible. |
| 11 | NC | unconnected | No internal connection, but must be soldered to PCB for best heat transfer. |
| 12 | OUTPUT | output | Emitter pin of the power transistor. This is a switching node. Attached this pin to an inductor and the cathode of the external diode. |
| 13 | NC | unconnected | No internal connection, but must be soldered to PCB for best heat transfer. |
| 14 | NC | unconnected | No internal connection, but must be soldered to PCB for best heat transfer. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-14-300mil |
| Category | Power Supply Chip |
| Pins | 14 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage | VOUT | 11.52 | 12 | 12.54 | V | LM2574HV, 15 V ≤ VIN ≤ 60 V, 0.1 A ≤ ILOAD ≤ 0.5 A, TJ = 25°C | 6 |
| Output voltage | VOUT | 11.4 | | 12.66 | V | LM2574HV, 15 V ≤ VIN ≤ 60 V, 0.1 A ≤ ILOAD ≤ 0.5 A, −40°C ≤ TJ ≤ 125°C | 6 |
| Output voltage | VOUT | 11.76 | 12 | 12.24 | V | VIN = 25 V, ILOAD = 100 mA | 6 |
| Oscillator frequency | fO | 47 | 52 | 58 | kHz | TJ = 25°C | 5 |
| Oscillator frequency | fO | 42 | | 63 | kHz | −40°C < TJ < 125°C | 5 |
| Saturation voltage | VSAT | | 0.9 | 1.2 | V | IOUT = 0.5 A, TJ = 25°C | 5 |
| Saturation voltage | VSAT | | | 1.4 | V | IOUT = 0.5 A, −40°C < TJ < 125°C | 5 |
| Current limit | ICL | 0.7 | 1 | 1.6 | A | Peak current, TJ = 25°C | 5 |
| Current limit | ICL | 0.65 | | 1.8 | A | Peak current, −40°C < TJ < 125°C | 5 |
| Current output leakage | IL | | 7.5 | 30 | mA | Output = -1 V | 5 |
| Quiescent current | IQ | | 5 | 10 | mA | See note (5) | 5 |
| Standby quiescent current | ISTBY | | 50 | 200 | μA | ON/OFF pin = 5 V (OFF) | 5 |
| ON/OFF pin input current | IH | | 12 | 30 | μA | ON/OFF pin = 5 V (OFF) | 5 |
| ON/OFF pin input current | IIL | | 0 | 10 | μA | ON/OFF pin = 0 V (ON) | 5 |
| Maximum supply voltage | | | | 63 | V | LM2574HV | 4 |
| ON/OFF pin input voltage | | -0.3 | | | V | Upper limit printed as VIN | 4 |
| Output voltage to ground, steady-state | | -1 | | | V | | 4 |
| Lead temperature, soldering | | | | 260 | °C | 10 s | 4 |
| Maximum junction temperature | | | | 150 | °C | | 4 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 4 |
| Supply voltage | | | | 60 | V | LM2574HV | 4 |
| Temperature range, junction | TJ | -40 | | 125 | °C | | 4 |
| Junction-to-ambient thermal resistance (SOIC) | RθJA | | 77.1 | | °C/W | SOIC (NPA) 14 pins, 4-layer JEDEC board | 4 |
| Junction-to-case (top) thermal resistance (SOIC) | RθJC(top) | | 29.2 | | °C/W | SOIC (NPA) 14 pins, 4-layer JEDEC board | 4 |
| Junction-to-board thermal resistance (SOIC) | RθJB | | 33.3 | | °C/W | SOIC (NPA) 14 pins, 4-layer JEDEC board | 4 |
| Efficiency | η | | 88 | | % | VIN = 15 V, ILOAD = 0.5 A | 6 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | | replacement for popular three-terminal linear regulators. Because of its high efficiency, the copper | 1 |
## CAD (KiCad official)
- Symbol: `LM2574HVM-12`
- Footprint: `Package_SO:SOIC-14_3.9x8.7mm_P1.27mm`
- 3D model: SOIC-14-300mil (KiCad packages3D, STEP)
- 3D model files: `lm2574hvm-12-etched.step` / `lm2574hvm-12-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm2574hvm-12.step` / `lm2574hvm-12.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/lm2574hv.pdf) (42 pp, sha256 `14799833368eb5fa`, retrieved 2026-11-06, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lm2574hvm-12-datasheet.pdf)