Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LM2574HVM-12

Texas Instruments · DC-DC Converters · SOIC-14-300mil

LM2574HVM-12 from Texas Instruments, in a SOIC-14-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected No internal connection, but must be soldered to PCB for best heat transfer.
2 NC unconnected No internal connection, but must be soldered to PCB for best heat transfer.
3 FB input Feedback sense input pin. Connect to the midpoint of feedback divider to set VOUT for ADJ version or connect this pin directly to the output capacitor for a fixed output version.
4 SIG_GND power_in Signal ground pin. Ground reference for internal references and logic. Connect to system ground.
5 ON/OFF input Enable input to the voltage regulator. High = OFF and low = ON. Connect to GND to enable the voltage regulator. Do not leave this pin float.
6 PWR_GND power_in Power ground pins. Connect to system ground and SIF GND, ground pins of CIN and COUT. Path to CIN must be as short as possible.
7 NC unconnected No internal connection, but must be soldered to PCB for best heat transfer.
8 NC unconnected No internal connection, but must be soldered to PCB for best heat transfer.
9 NC unconnected No internal connection, but must be soldered to PCB for best heat transfer.
10 VIN power_in Supply input pin to collector pin of high-side transistor. Connect to power supply and input bypass capacitors CIN. Path from VIN pin to high frequency bypass CIN and PWR GND must be as short as possible.
11 NC unconnected No internal connection, but must be soldered to PCB for best heat transfer.
12 OUTPUT output Emitter pin of the power transistor. This is a switching node. Attached this pin to an inductor and the cathode of the external diode.
13 NC unconnected No internal connection, but must be soldered to PCB for best heat transfer.
14 NC unconnected No internal connection, but must be soldered to PCB for best heat transfer.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-14-300mil
Category Power Supply Chip
Pins 14

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output voltage VOUT 11.52 12 12.54 V LM2574HV, 15 V ≤ VIN ≤ 60 V, 0.1 A ≤ ILOAD ≤ 0.5 A, TJ = 25°C 6
Output voltage VOUT 11.4 12.66 V LM2574HV, 15 V ≤ VIN ≤ 60 V, 0.1 A ≤ ILOAD ≤ 0.5 A, −40°C ≤ TJ ≤ 125°C 6
Output voltage VOUT 11.76 12 12.24 V VIN = 25 V, ILOAD = 100 mA 6
Oscillator frequency fO 47 52 58 kHz TJ = 25°C 5
Oscillator frequency fO 42 63 kHz −40°C < TJ < 125°C 5
Saturation voltage VSAT 0.9 1.2 V IOUT = 0.5 A, TJ = 25°C 5
Saturation voltage VSAT 1.4 V IOUT = 0.5 A, −40°C < TJ < 125°C 5
Current limit ICL 0.7 1 1.6 A Peak current, TJ = 25°C 5
Current limit ICL 0.65 1.8 A Peak current, −40°C < TJ < 125°C 5
Current output leakage IL 7.5 30 mA Output = -1 V 5
Quiescent current IQ 5 10 mA See note (5) 5
Standby quiescent current ISTBY 50 200 μA ON/OFF pin = 5 V (OFF) 5
ON/OFF pin input current IH 12 30 μA ON/OFF pin = 5 V (OFF) 5
ON/OFF pin input current IIL 0 10 μA ON/OFF pin = 0 V (ON) 5
Maximum supply voltage 63 V LM2574HV 4
ON/OFF pin input voltage -0.3 V Upper limit printed as VIN 4
Output voltage to ground, steady-state -1 V 4
Lead temperature, soldering 260 °C 10 s 4
Maximum junction temperature 150 °C 4
Storage temperature Tstg -65 150 °C 4
Supply voltage 60 V LM2574HV 4
Temperature range, junction TJ -40 125 °C 4
Junction-to-ambient thermal resistance (SOIC) RθJA 77.1 °C/W SOIC (NPA) 14 pins, 4-layer JEDEC board 4
Junction-to-case (top) thermal resistance (SOIC) RθJC(top) 29.2 °C/W SOIC (NPA) 14 pins, 4-layer JEDEC board 4
Junction-to-board thermal resistance (SOIC) RθJB 33.3 °C/W SOIC (NPA) 14 pins, 4-layer JEDEC board 4
Efficiency η 88 % VIN = 15 V, ILOAD = 0.5 A 6

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper replacement for popular three-terminal linear regulators. Because of its high efficiency, the copper 1

CAD (KiCad official)

  • Symbol: LM2574HVM-12
  • Footprint: Package_SO:SOIC-14_3.9x8.7mm_P1.27mm
  • 3D model: SOIC-14-300mil (KiCad packages3D, STEP)
  • 3D model files: lm2574hvm-12-etched.step / lm2574hvm-12-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm2574hvm-12.step / lm2574hvm-12.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (42 pp, sha256 14799833368eb5fa, retrieved 2026-11-06, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF