component
LM25085MM
Public Made by Adomby adom
Texas Instruments DC-DC Converters, VSSOP-8-0.65mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Initial commit: component/lm25085mm
beb83df
LM25085MM
Texas Instruments · DC-DC Converters · VSSOP-8-0.65mm
LM25085MM from Texas Instruments, in a VSSOP-8-0.65mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ADJ | input | Current limit threshold adjustment input set by external resistor from VIN used in conjunction with sense resistor or PFET RDS(ON). |
| 2 | RT | input | On-time control and shutdown input; external resistor from VIN sets buck switch on-time and switching frequency, grounding disables controller. |
| 3 | FB | input | Voltage feedback input from regulated output for regulation and over-voltage comparators with 1.25V regulation threshold. |
| 4 | GND | power_in | Circuit ground providing reference for all internal circuitry. |
| 5 | ISEN | input | Current sense input for current limit detection; connect to PFET drain for RDS(ON) sensing or to PFET source with sense resistor for alternative sensing. |
| 6 | PGATE | output | Gate driver output signal connected to external PFET gate. |
| 7 | VCC | power_out | Gate driver bias regulator output providing voltage relative to VIN for PFET gate driver biasing; requires low ESR capacitor from VIN to VCC. |
| 8 | VIN | power_in | Input power supply voltage with operating range of 4.5V to 42V; requires low ESR bypass capacitor located close to VIN and GND pins. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8-0.65mm |
| Category | Power Management (PMIC) |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
LM25085MM - Footprint:
Package_SO:VSSOP-8_2.3x2mm_P0.5mm - 3D model: VSSOP-8-0.65mm (KiCad packages3D, STEP)
- 3D model files:
lm25085mm-etched.step/lm25085mm-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm25085mm.step/lm25085mm.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (40 pp, sha256
255a8aef9377a78d, retrieved 2026-09-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LM25085MM
**Texas Instruments** · DC-DC Converters · VSSOP-8-0.65mm
LM25085MM from Texas Instruments, in a VSSOP-8-0.65mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ADJ | input | Current limit threshold adjustment input set by external resistor from VIN used in conjunction with sense resistor or PFET RDS(ON). |
| 2 | RT | input | On-time control and shutdown input; external resistor from VIN sets buck switch on-time and switching frequency, grounding disables controller. |
| 3 | FB | input | Voltage feedback input from regulated output for regulation and over-voltage comparators with 1.25V regulation threshold. |
| 4 | GND | power_in | Circuit ground providing reference for all internal circuitry. |
| 5 | ISEN | input | Current sense input for current limit detection; connect to PFET drain for RDS(ON) sensing or to PFET source with sense resistor for alternative sensing. |
| 6 | PGATE | output | Gate driver output signal connected to external PFET gate. |
| 7 | VCC | power_out | Gate driver bias regulator output providing voltage relative to VIN for PFET gate driver biasing; requires low ESR capacitor from VIN to VCC. |
| 8 | VIN | power_in | Input power supply voltage with operating range of 4.5V to 42V; requires low ESR bypass capacitor located close to VIN and GND pins. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8-0.65mm |
| Category | Power Management (PMIC) |
| Pins | 8 |
## CAD (KiCad official)
- Symbol: `LM25085MM`
- Footprint: `Package_SO:VSSOP-8_2.3x2mm_P0.5mm`
- 3D model: VSSOP-8-0.65mm (KiCad packages3D, STEP)
- 3D model files: `lm25085mm-etched.step` / `lm25085mm-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm25085mm.step` / `lm25085mm.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lm25085) (40 pp, sha256 `255a8aef9377a78d`, retrieved 2026-09-27, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lm25085mm-datasheet.pdf)