main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs lm25085mm: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers lm25085mm: viewers · Ray
lm25085mm-etched.fit.json lm25085mm: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lm25085mm-etched.glb lm25085mm: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lm25085mm-etched.step lm25085mm: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lm25085mm.glb Publish 0.1.0 · Ray
lm25085mm.kicad_mod Publish 0.1.0 · Ray
lm25085mm.kicad_sym Publish 0.1.0 · Ray
lm25085mm.lbr Publish 0.1.0 · Ray
lm25085mm.step Publish 0.1.0 · Ray
package.json lm25085mm: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json lm25085mm: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/lm25085mm · Ray

LM25085MM

Texas Instruments · DC-DC Converters · VSSOP-8-0.65mm

LM25085MM from Texas Instruments, in a VSSOP-8-0.65mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 ADJ input Current limit threshold adjustment input set by external resistor from VIN used in conjunction with sense resistor or PFET RDS(ON).
2 RT input On-time control and shutdown input; external resistor from VIN sets buck switch on-time and switching frequency, grounding disables controller.
3 FB input Voltage feedback input from regulated output for regulation and over-voltage comparators with 1.25V regulation threshold.
4 GND power_in Circuit ground providing reference for all internal circuitry.
5 ISEN input Current sense input for current limit detection; connect to PFET drain for RDS(ON) sensing or to PFET source with sense resistor for alternative sensing.
6 PGATE output Gate driver output signal connected to external PFET gate.
7 VCC power_out Gate driver bias regulator output providing voltage relative to VIN for PFET gate driver biasing; requires low ESR capacitor from VIN to VCC.
8 VIN power_in Input power supply voltage with operating range of 4.5V to 42V; requires low ESR bypass capacitor located close to VIN and GND pins.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VSSOP-8-0.65mm
Category Power Management (PMIC)
Pins 8

CAD (KiCad official)

  • Symbol: LM25085MM
  • Footprint: Package_SO:VSSOP-8_2.3x2mm_P0.5mm
  • 3D model: VSSOP-8-0.65mm (KiCad packages3D, STEP)
  • 3D model files: lm25085mm-etched.step / lm25085mm-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm25085mm.step / lm25085mm.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (40 pp, sha256 255a8aef9377a78d, retrieved 2026-09-27, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF