main
Ray Publish 0.1.0 bcac55a
{
  "slug": "lm239apt",
  "version": "0.1.0",
  "type": "component",
  "description": "STMicroelectronics Comparators, TSSOP-14. Pinout settled in review by an AI reviewer against the manufacturer's datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "amplifiers-comparators",
    "lm239apt",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lm239apt.kicad_sym",
    "lm239apt.kicad_mod",
    "lm239apt.glb",
    "lm239apt.step",
    "lm239apt.lbr",
    "docs/hero.png",
    "docs/lm239apt-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lm239apt-hero.glb",
    "lm239apt-hero.overlay.json"
  ],
  "component": {
    "mpn": "LM239APT",
    "manufacturer": "STMicroelectronics",
    "package": "TSSOP-14",
    "pin_count": 14,
    "category": "Amplifiers/Comparators",
    "subcategory": "Comparators",
    "datasheet": "https://www.st.com/resource/en/datasheet/lm239apt.pdf",
    "parts": {
      "symbol": "lm239apt.kicad_sym",
      "footprint": "lm239apt.kicad_mod",
      "model_3d": "lm239apt-hero.glb",
      "model_3d_plain": "lm239apt.glb",
      "model_3d_step": "lm239apt-etched.step",
      "model_3d_step_plain": "lm239apt.step",
      "lbr": "lm239apt.lbr"
    },
    "distributor_links": {
      "lcsc": "C283323",
      "digikey": "497-15612-2-ND",
      "mouser": "511-LM239AP"
    },
    "distributor_check": {
      "checked_at": "2026-11-13T05:25:25Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "497-15612-2-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "511-LM239AP",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "Output2",
        "type": "output",
        "description": "Output of comparator 2. Open-collector comparator output; VOL 250 mV typ / 400 mV max at ISINK = 4 mA."
      },
      {
        "number": "2",
        "name": "Output1",
        "type": "output",
        "description": "Output of comparator 1. Open-collector comparator output; VOL 250 mV typ / 400 mV max at ISINK = 4 mA."
      },
      {
        "number": "3",
        "name": "VCC+",
        "type": "power_in",
        "description": "Positive supply, printed V_CC^+; 2 to 36 V single or +/-1 to +/-18 V split."
      },
      {
        "number": "4",
        "name": "Inverting input1",
        "type": "input",
        "description": "Inverting (-) input of comparator 1. Common-mode range 0 V to VCC+ -1.5 V. Factory had IN+1 here (swapped)."
      },
      {
        "number": "5",
        "name": "Non-inverting input1",
        "type": "input",
        "description": "Non-inverting (+) input of comparator 1. Common-mode range 0 V to VCC+ -1.5 V. Factory had IN-1 here (swapped)."
      },
      {
        "number": "6",
        "name": "Inverting input2",
        "type": "input",
        "description": "Inverting (-) input of comparator 2. Common-mode range 0 V to VCC+ -1.5 V."
      },
      {
        "number": "7",
        "name": "Non-inverting input2",
        "type": "input",
        "description": "Non-inverting (+) input of comparator 2. Common-mode range 0 V to VCC+ -1.5 V."
      },
      {
        "number": "8",
        "name": "Inverting input3",
        "type": "input",
        "description": "Inverting (-) input of comparator 3. Common-mode range 0 V to VCC+ -1.5 V. Factory had IN+3 here (swapped)."
      },
      {
        "number": "9",
        "name": "Non-inverting input3",
        "type": "input",
        "description": "Non-inverting (+) input of comparator 3. Common-mode range 0 V to VCC+ -1.5 V. Factory had IN-3 here (swapped)."
      },
      {
        "number": "10",
        "name": "Inverting input4",
        "type": "input",
        "description": "Inverting (-) input of comparator 4. Common-mode range 0 V to VCC+ -1.5 V."
      },
      {
        "number": "11",
        "name": "Non-inverting input4",
        "type": "input",
        "description": "Non-inverting (+) input of comparator 4. Common-mode range 0 V to VCC+ -1.5 V."
      },
      {
        "number": "12",
        "name": "VCC-",
        "type": "power_in",
        "description": "Negative supply, printed V_CC^-; tied to ground in single-supply use (Table 3 conditions VCC- = GND). Factory had 'GND'."
      },
      {
        "number": "13",
        "name": "Output4",
        "type": "output",
        "description": "Output of comparator 4. Open-collector comparator output; VOL 250 mV typ / 400 mV max at ISINK = 4 mA."
      },
      {
        "number": "14",
        "name": "Output3",
        "type": "output",
        "description": "Output of comparator 3. Open-collector comparator output; VOL 250 mV typ / 400 mV max at ISINK = 4 mA."
      }
    ],
    "provenance": {
      "extractor": "ds2sf",
      "datasheet": {
        "url": "https://www.st.com/resource/en/datasheet/lm239apt.pdf",
        "pages": 19,
        "sha256": "5adc47258717f516",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 14,
        "described": 14,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lm239apt.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          5.0,
          1.0
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "3ee5786aae56190997aa793ba3cfc003fd616782770e29719b4562f012982245",
        "checked": "2026-11-13",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lm239apt-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          5.0,
          1.0
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "cd9eade3553c8b0b4ed7c6b1a88de76742e8819d207dcd20f9e9cec119a4bc1f",
        "checked": "2026-11-13",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "TSSOP14",
      "source_page": 14,
      "D": {
        "nom_mm": 5.0,
        "range_mm": [
          4.9,
          5.1
        ]
      },
      "E1": {
        "nom_mm": 4.4,
        "range_mm": [
          4.3,
          4.5
        ]
      },
      "E": {
        "nom_mm": 6.4,
        "range_mm": [
          6.2,
          6.6
        ]
      },
      "e": {
        "nom_mm": 0.65,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 1.2,
        "range_mm": [
          null,
          1.2
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "lm239apt.step",
        "verdict": "PASS",
        "reasons": [
          "height and body within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}