3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLM239APT
STMicroelectronics · Comparators · TSSOP-14
LM239APT from STMicroelectronics, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Output2 | output | Output of comparator 2. Open-collector comparator output; VOL 250 mV typ / 400 mV max at ISINK = 4 mA. |
| 2 | Output1 | output | Output of comparator 1. Open-collector comparator output; VOL 250 mV typ / 400 mV max at ISINK = 4 mA. |
| 3 | VCC+ | power_in | Positive supply, printed V_CC^+; 2 to 36 V single or +/-1 to +/-18 V split. |
| 4 | Inverting input1 | input | Inverting (-) input of comparator 1. Common-mode range 0 V to VCC+ -1.5 V. Factory had IN+1 here (swapped). |
| 5 | Non-inverting input1 | input | Non-inverting (+) input of comparator 1. Common-mode range 0 V to VCC+ -1.5 V. Factory had IN-1 here (swapped). |
| 6 | Inverting input2 | input | Inverting (-) input of comparator 2. Common-mode range 0 V to VCC+ -1.5 V. |
| 7 | Non-inverting input2 | input | Non-inverting (+) input of comparator 2. Common-mode range 0 V to VCC+ -1.5 V. |
| 8 | Inverting input3 | input | Inverting (-) input of comparator 3. Common-mode range 0 V to VCC+ -1.5 V. Factory had IN+3 here (swapped). |
| 9 | Non-inverting input3 | input | Non-inverting (+) input of comparator 3. Common-mode range 0 V to VCC+ -1.5 V. Factory had IN-3 here (swapped). |
| 10 | Inverting input4 | input | Inverting (-) input of comparator 4. Common-mode range 0 V to VCC+ -1.5 V. |
| 11 | Non-inverting input4 | input | Non-inverting (+) input of comparator 4. Common-mode range 0 V to VCC+ -1.5 V. |
| 12 | VCC- | power_in | Negative supply, printed V_CC^-; tied to ground in single-supply use (Table 3 conditions VCC- = GND). Factory had 'GND'. |
| 13 | Output4 | output | Output of comparator 4. Open-collector comparator output; VOL 250 mV typ / 400 mV max at ISINK = 4 mA. |
| 14 | Output3 | output | Output of comparator 3. Open-collector comparator output; VOL 250 mV typ / 400 mV max at ISINK = 4 mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | TSSOP-14 |
| Category | Amplifiers/Comparators |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | VIO | 1 | 2 | mV | 6 | ||
| Input offset voltage | VIO | 4 | mV | Tmin ≤ Tamb ≤ Tmax | 6 | ||
| Input offset current | IIO | 3 | 25 | nA | 6 | ||
| Input offset current | IIO | 100 | nA | Tmin ≤ Tamb ≤ Tmax | 6 | ||
| Input bias current (I+ or I-) | IIB | 25 | 100 | nA | 6 | ||
| Input bias current (I+ or I-) | IIB | 300 | nA | Tmin ≤ Tamb ≤ Tmax | 6 | ||
| Large signal voltage gain | AVD | 50 | 200 | V/mV | VCC = 15 V, RL = 15 kΩ, Vo = 1 V to 11 V | 6 | |
| Supply current (all comparators) | ICC | 1.1 | 2 | mA | VCC = +5 V, no load | 6 | |
| Supply current (all comparators) | ICC | 1.3 | 2.5 | mA | VCC = +30 V, no load | 6 | |
| Input common mode voltage range | VICM | 0 | V | VCC = 30 V | 6 | ||
| Low level output voltage | VOL | 250 | 400 | mV | VID = -1 V, ISINK = 4 mA | 6 | |
| Low level output voltage | VOL | 700 | mV | VID = -1 V, ISINK = 4 mA, Tmin ≤ Tamb ≤ Tmax | 6 | ||
| High level output current | IOH | 0.1 | 1 | nA | VCC = Vo = 30 V, VID = 1 V | 6 | |
| High level output current | IOH | 1 | μA | VCC = Vo = 30 V, VID = 1 V, Tmin ≤ Tamb ≤ Tmax | 6 | ||
| Output sink current | ISINK | 6 | 16 | mA | VID = 1 V, Vo = 1.5 V | 6 | |
| Supply voltage | VCC | 36 | V | 4 | |||
| Differential input voltage | VID | -36 | 36 | V | 4 | ||
| Input voltage | VIN | -0.3 | 36 | V | 4 | ||
| Thermal resistance junction to ambient (TSSOP14) | Rthja | 100 | °C/W | 4 | |||
| Thermal resistance junction to case (TSSOP14) | Rthjc | 32 | °C/W | 4 | |||
| Storage temperature range | Tstg | -65 | 150 | °C | 4 | ||
| Junction temperature | Tj | 150 | °C | 4 | |||
| Lead temperature (soldering 10 seconds) | TLEAD | 260 | °C | soldering 10 seconds | 4 | ||
| ESD human body model | HBM | 500 | V | Human body model | 4 | ||
| ESD machine model | MM | 100 | V | Machine model | 4 | ||
| ESD charged device model | CDM | 1500 | V | Charged device model | 4 | ||
| Supply voltage (single supply) | VCC | 2 | 32 | V | 5 | ||
| Supply voltage (dual supplies) | VCC | 1 | 16 | V | dual supplies ±1 V to ±16 V | 5 | |
| Common mode input voltage range | VICM | 0 | V | 5 | |||
| Operating free-air temperature range | Toper | -40 | 105 | °C | LM239, LM239A | 5 |
CAD (KiCad official)
- Symbol:
LM239APT - Footprint:
Package_SO:TSSOP-14_4.4x5mm_P0.65mm - 3D model: TSSOP-14 (KiCad packages3D, STEP)
- 3D model files:
lm239apt-etched.step/lm239apt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm239apt.step/lm239apt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (19 pp, sha256
5adc47258717f516, retrieved 2026-11-13, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).