Generated by kicad-footprint-generator · KiCad file format 20260206
LM22671MRE-ADJ
Texas Instruments · DC-DC Converters · SO-8
LM22671MRE-ADJ from Texas Instruments, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BOOT | input | Bootstrap input that provides the gate voltage for the high-side NFET; the BOOT pin voltage must stay within VSW + 7 V (absolute maximum ratings, page 4). |
| 2 | SS | input | Soft-start pin used to increase the soft-start time; the SS pin voltage is limited to -0.5 V to 7 V (absolute maximum ratings, page 4). |
| 3 | RT/SYNC | input | Sets the oscillator mode as a frequency adjust pin (single external resistor) or as a synchronization input; the RT/SYNC pin voltage is limited to -0.5 V to 7 V (absolute maximum ratings, page 4). |
| 4 | FB | input | Feedback input to the regulator; the FB pin voltage is limited to -0.5 V to 7 V (absolute maximum ratings, page 4). |
| 5 | EN | input | Precision enable pin used to control regulator start-up and shut-down; the EN pin voltage is limited to -0.5 V to 6 V (absolute maximum ratings, page 4). |
| 6 | GND | power_in | System ground pin for the regulator. |
| 7 | VIN | power_in | Supply input to the regulator; VIN is rated 4.5 V to 42 V in recommended operating conditions, with a 43 V absolute maximum (page 4). |
| 8 | SW | output | Switching output of the regulator; the DC voltage on SW to GND is limited to -5 V to VIN, with a -10 V limit for pulses up to 50 ns (absolute maximum ratings, page 4). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SO-8 |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Feedback Voltage (ADJ version) | VFB | 1.266 | 1.285 | 1.304 | V | VIN = 4.7 V to 42 V | 5 |
| Feedback Voltage (ADJ version), over temperature | VFB | 1.259 | 1.311 | V | VIN = 4.7 V to 42 V, -40°C ≤ TJ ≤ 125°C | 5 | |
| Quiescent Current | IQ | 3.4 | mA | VFB = 5 V | 5 | ||
| Quiescent Current, over temperature | IQ | 6 | mA | VFB = 5 V, -40°C ≤ TJ ≤ 125°C | 5 | ||
| Standby Quiescent Current | ISTDBY | 25 | 40 | µA | EN Pin = 0 V | 5 | |
| Current Limit | ICL | 0.62 | 0.7 | 0.84 | A | 5 | |
| Current Limit, over temperature | ICL | 0.56 | 0.9 | A | -40°C ≤ TJ ≤ 125°C | 5 | |
| Output Leakage Current | IL | 0.2 | 2 | µA | VIN = 42 V, EN Pin = 0 V, VSW = 0 V | 5 | |
| Output Leakage Current (reverse) | IL | 0.1 | 3 | µA | VSW = -1 V | 5 | |
| Switch On-Resistance | RDS(ON) | 0.2 | 0.24 | Ω | 5 | ||
| Switch On-Resistance, over temperature | RDS(ON) | 0.32 | Ω | -40°C ≤ TJ ≤ 125°C | 5 | ||
| Oscillator Frequency, over temperature | fO | 400 | 600 | kHz | -40°C ≤ TJ ≤ 125°C | 5 | |
| Minimum Off-time, over temperature | TOFFMIN | 100 | 300 | ns | -40°C ≤ TJ ≤ 125°C | 5 | |
| Enable Threshold Voltage, falling, over temperature | VEN | 1.3 | 1.9 | V | Falling, -40°C ≤ TJ ≤ 125°C | 5 | |
| Maximum Synchronization Frequency | FSYNC | 1 | MHz | VSYNC = 3.5 V, 50% duty-cycle | 5 | ||
| Soft-Start Current, over temperature | ISS | 30 | 70 | µA | -40°C ≤ TJ ≤ 125°C | 5 | |
| Supply Voltage (VIN) | VIN | 4.5 | 42 | V | 4 | ||
| Junction Temperature Range | TJ | -40 | 125 | °C | 4 | ||
| VIN to GND | VIN | 43 | V | 4 | |||
| EN Pin Voltage | VEN | -0.5 | 6 | V | 4 | ||
| SS, RT/SYNC Pin Voltage | VSS, VRT/SYNC | -0.5 | 7 | V | 4 | ||
| SW to GND | VSW | -5 | V | DC; maximum printed as VIN; extended -10 V limit for pulses up to 50 ns | 4 | ||
| FB Pin Voltage | VFB | -0.5 | 7 | V | 4 | ||
| Junction Temperature | TJ | 150 | °C | 4 | |||
| Storage Temperature Range | Tstg | -65 | 150 | °C | 4 | ||
| Electrostatic Discharge, HBM | V(ESD) | -2 | 2 | kV | Human body model (HBM), per ANSI/ESDA/JEDEC JS-001 | 4 | |
| Junction-to-ambient thermal resistance | RθJA | 60 | °C/W | DDA (HSOIC/SO PowerPAD 8-pin) package | 4 |
CAD (KiCad official)
- Symbol:
LM22671MRE-ADJ - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files:
lm22671mre-adj-etched.step/lm22671mre-adj-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm22671mre-adj.step/lm22671mre-adj.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (32 pp, sha256
4eeaca9dce316d79, retrieved 2026-11-12, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).