Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LM22671MRE-ADJ

Texas Instruments · DC-DC Converters · SO-8

LM22671MRE-ADJ from Texas Instruments, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 BOOT input Bootstrap input that provides the gate voltage for the high-side NFET; the BOOT pin voltage must stay within VSW + 7 V (absolute maximum ratings, page 4).
2 SS input Soft-start pin used to increase the soft-start time; the SS pin voltage is limited to -0.5 V to 7 V (absolute maximum ratings, page 4).
3 RT/SYNC input Sets the oscillator mode as a frequency adjust pin (single external resistor) or as a synchronization input; the RT/SYNC pin voltage is limited to -0.5 V to 7 V (absolute maximum ratings, page 4).
4 FB input Feedback input to the regulator; the FB pin voltage is limited to -0.5 V to 7 V (absolute maximum ratings, page 4).
5 EN input Precision enable pin used to control regulator start-up and shut-down; the EN pin voltage is limited to -0.5 V to 6 V (absolute maximum ratings, page 4).
6 GND power_in System ground pin for the regulator.
7 VIN power_in Supply input to the regulator; VIN is rated 4.5 V to 42 V in recommended operating conditions, with a 43 V absolute maximum (page 4).
8 SW output Switching output of the regulator; the DC voltage on SW to GND is limited to -5 V to VIN, with a -10 V limit for pulses up to 50 ns (absolute maximum ratings, page 4).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SO-8
Category Power Supply Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Feedback Voltage (ADJ version) VFB 1.266 1.285 1.304 V VIN = 4.7 V to 42 V 5
Feedback Voltage (ADJ version), over temperature VFB 1.259 1.311 V VIN = 4.7 V to 42 V, -40°C ≤ TJ ≤ 125°C 5
Quiescent Current IQ 3.4 mA VFB = 5 V 5
Quiescent Current, over temperature IQ 6 mA VFB = 5 V, -40°C ≤ TJ ≤ 125°C 5
Standby Quiescent Current ISTDBY 25 40 µA EN Pin = 0 V 5
Current Limit ICL 0.62 0.7 0.84 A 5
Current Limit, over temperature ICL 0.56 0.9 A -40°C ≤ TJ ≤ 125°C 5
Output Leakage Current IL 0.2 2 µA VIN = 42 V, EN Pin = 0 V, VSW = 0 V 5
Output Leakage Current (reverse) IL 0.1 3 µA VSW = -1 V 5
Switch On-Resistance RDS(ON) 0.2 0.24 Ω 5
Switch On-Resistance, over temperature RDS(ON) 0.32 Ω -40°C ≤ TJ ≤ 125°C 5
Oscillator Frequency, over temperature fO 400 600 kHz -40°C ≤ TJ ≤ 125°C 5
Minimum Off-time, over temperature TOFFMIN 100 300 ns -40°C ≤ TJ ≤ 125°C 5
Enable Threshold Voltage, falling, over temperature VEN 1.3 1.9 V Falling, -40°C ≤ TJ ≤ 125°C 5
Maximum Synchronization Frequency FSYNC 1 MHz VSYNC = 3.5 V, 50% duty-cycle 5
Soft-Start Current, over temperature ISS 30 70 µA -40°C ≤ TJ ≤ 125°C 5
Supply Voltage (VIN) VIN 4.5 42 V 4
Junction Temperature Range TJ -40 125 °C 4
VIN to GND VIN 43 V 4
EN Pin Voltage VEN -0.5 6 V 4
SS, RT/SYNC Pin Voltage VSS, VRT/SYNC -0.5 7 V 4
SW to GND VSW -5 V DC; maximum printed as VIN; extended -10 V limit for pulses up to 50 ns 4
FB Pin Voltage VFB -0.5 7 V 4
Junction Temperature TJ 150 °C 4
Storage Temperature Range Tstg -65 150 °C 4
Electrostatic Discharge, HBM V(ESD) -2 2 kV Human body model (HBM), per ANSI/ESDA/JEDEC JS-001 4
Junction-to-ambient thermal resistance RθJA 60 °C/W DDA (HSOIC/SO PowerPAD 8-pin) package 4

CAD (KiCad official)

  • Symbol: LM22671MRE-ADJ
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SO-8 (KiCad packages3D, STEP)
  • 3D model files: lm22671mre-adj-etched.step / lm22671mre-adj-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm22671mre-adj.step / lm22671mre-adj.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (32 pp, sha256 4eeaca9dce316d79, retrieved 2026-11-12, tier: manufacturer)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF