main
Ray
Publish 0.1.1
25e35cb
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256
{
"slug": "lm224apt",
"version": "0.1.1",
"type": "component",
"description": "STMicroelectronics Operational Amplifier, TSSOP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"amplifiers-comparators",
"lm224apt",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"lm224apt.kicad_sym",
"lm224apt.kicad_mod",
"lm224apt.glb",
"lm224apt.step",
"lm224apt.lbr",
"docs/hero.png",
"docs/lm224apt-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"lm224apt-hero.glb",
"lm224apt-hero.overlay.json",
"lm224apt-etched.glb",
"lm224apt-etched.step"
],
"component": {
"mpn": "LM224APT",
"manufacturer": "STMicroelectronics",
"package": "TSSOP-14",
"pin_count": 14,
"category": "Amplifiers/Comparators",
"subcategory": "Operational Amplifier",
"datasheet": "https://www.st.com/resource/en/datasheet/lm224apt.pdf",
"parts": {
"symbol": "lm224apt.kicad_sym",
"footprint": "lm224apt.kicad_mod",
"model_3d": "lm224apt-hero.glb",
"model_3d_plain": "lm224apt.glb",
"model_3d_step": "lm224apt-etched.step",
"model_3d_step_plain": "lm224apt.step",
"lbr": "lm224apt.lbr"
},
"distributor_links": {
"lcsc": "C2652256",
"digikey": "497-4043-2-ND",
"mouser": "511-LM224AP"
},
"distributor_check": {
"checked_at": "2026-11-05T21:47:07Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "497-4043-2-ND",
"status": "found"
},
"mouser": {
"pn": "511-LM224AP",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "Output 1",
"type": "output",
"description": "Output of amplifier 1; the output short-circuit duration is infinite, and shorts to VCC can cause excessive heating if VCC > 15 V."
},
{
"number": "2",
"name": "Inverting input 1",
"type": "input",
"description": "Inverting input of amplifier 1; for the LM224A variant the input voltage must stay between -0.3 V and VCC+ + 0.3 V (Table 1)."
},
{
"number": "3",
"name": "Non-inverting input 1",
"type": "input",
"description": "Non-inverting input of amplifier 1; for the LM224A variant the input voltage must stay between -0.3 V and VCC+ + 0.3 V (Table 1)."
},
{
"number": "4",
"name": "VCC+",
"type": "power_in",
"description": "Positive supply: 3 V to 30 V single supply or ±1.5 V to ±15 V dual supply per Table 2, with absolute maximum ratings of ±16 V or 32 V."
},
{
"number": "5",
"name": "Non-inverting input 2",
"type": "input",
"description": "Non-inverting input of amplifier 2; for the LM224A variant the input voltage must stay between -0.3 V and VCC+ + 0.3 V (Table 1)."
},
{
"number": "6",
"name": "Inverting input 2",
"type": "input",
"description": "Inverting input of amplifier 2; for the LM224A variant the input voltage must stay between -0.3 V and VCC+ + 0.3 V (Table 1)."
},
{
"number": "7",
"name": "Output 2",
"type": "output",
"description": "Output of amplifier 2; the output short-circuit duration is infinite, and shorts to VCC can cause excessive heating if VCC > 15 V."
},
{
"number": "8",
"name": "Output 3",
"type": "output",
"description": "Output of amplifier 3; the output short-circuit duration is infinite, and shorts to VCC can cause excessive heating if VCC > 15 V."
},
{
"number": "9",
"name": "Inverting input 3",
"type": "input",
"description": "Inverting input of amplifier 3; for the LM224A variant the input voltage must stay between -0.3 V and VCC+ + 0.3 V (Table 1)."
},
{
"number": "10",
"name": "Non-inverting input 3",
"type": "input",
"description": "Non-inverting input of amplifier 3; for the LM224A variant the input voltage must stay between -0.3 V and VCC+ + 0.3 V (Table 1)."
},
{
"number": "11",
"name": "VCC-",
"type": "power_in",
"description": "Negative supply pin, connected to ground for single-supply operation (Table 3 conditions)."
},
{
"number": "12",
"name": "Non-inverting input 4",
"type": "input",
"description": "Non-inverting input of amplifier 4; for the LM224A variant the input voltage must stay between -0.3 V and VCC+ + 0.3 V (Table 1)."
},
{
"number": "13",
"name": "Inverting input 4",
"type": "input",
"description": "Inverting input of amplifier 4; for the LM224A variant the input voltage must stay between -0.3 V and VCC+ + 0.3 V (Table 1)."
},
{
"number": "14",
"name": "Output 4",
"type": "output",
"description": "Output of amplifier 4; the output short-circuit duration is infinite, and shorts to VCC can cause excessive heating if VCC > 15 V."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: Pin-to-name mapping was taken from the scrambled Figure 1 text layout on page 2 and matches the stan"
],
"pages_sent": 22,
"cost_usd": 0.0354,
"at": "2026-11-05T21:46:56"
},
"datasheet": {
"url": "https://www.st.com/resource/en/datasheet/lm224apt.pdf",
"pages": 22,
"sha256": "c1aa97669d6ca9c8",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 14,
"described": 14,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "lm224apt.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.4,
5.0,
1.0
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "3ee5786aae56190997aa793ba3cfc003fd616782770e29719b4562f012982245",
"checked": "2026-11-05",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "lm224apt-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.4,
5.0,
1.0
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "a2d909be2c77001eeb562b758205b0ec229d7aec92a6c51c04440483a1f475ac",
"checked": "2026-11-05",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"title": "LM224APT",
"brief": "STMicroelectronics Operational Amplifier, TSSOP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"metadata": {
"specs": {
"Manufacturer": "STMicroelectronics",
"Package": "TSSOP-14",
"Category": "Amplifiers/Comparators",
"Pins": "14"
},
"appearance": {
"housing": {
"quote": "Updated cover page, Section 2 Absolute maximum ratings and operating conditions and",
"page": 18,
"doc": "ds.pdf",
"material": "Abs"
},
"version": 1,
"datasheet_sha256": "c1aa97669d6ca9c85b0724e5ace4a748a2d805766184b822fc0389a4aeb2ca9a"
}
},
"discovery_triggers": [
"lm224apt"
],
"discovery_pitch": "LM224APT (STMicroelectronics) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
"visibility": "public"
}