3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLM224APT
STMicroelectronics · Operational Amplifier · TSSOP-14
LM224APT from STMicroelectronics, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Output 1 | output | Output of amplifier 1; the output short-circuit duration is infinite, and shorts to VCC can cause excessive heating if VCC > 15 V. |
| 2 | Inverting input 1 | input | Inverting input of amplifier 1; for the LM224A variant the input voltage must stay between -0.3 V and VCC+ + 0.3 V (Table 1). |
| 3 | Non-inverting input 1 | input | Non-inverting input of amplifier 1; for the LM224A variant the input voltage must stay between -0.3 V and VCC+ + 0.3 V (Table 1). |
| 4 | VCC+ | power_in | Positive supply: 3 V to 30 V single supply or ±1.5 V to ±15 V dual supply per Table 2, with absolute maximum ratings of ±16 V or 32 V. |
| 5 | Non-inverting input 2 | input | Non-inverting input of amplifier 2; for the LM224A variant the input voltage must stay between -0.3 V and VCC+ + 0.3 V (Table 1). |
| 6 | Inverting input 2 | input | Inverting input of amplifier 2; for the LM224A variant the input voltage must stay between -0.3 V and VCC+ + 0.3 V (Table 1). |
| 7 | Output 2 | output | Output of amplifier 2; the output short-circuit duration is infinite, and shorts to VCC can cause excessive heating if VCC > 15 V. |
| 8 | Output 3 | output | Output of amplifier 3; the output short-circuit duration is infinite, and shorts to VCC can cause excessive heating if VCC > 15 V. |
| 9 | Inverting input 3 | input | Inverting input of amplifier 3; for the LM224A variant the input voltage must stay between -0.3 V and VCC+ + 0.3 V (Table 1). |
| 10 | Non-inverting input 3 | input | Non-inverting input of amplifier 3; for the LM224A variant the input voltage must stay between -0.3 V and VCC+ + 0.3 V (Table 1). |
| 11 | VCC- | power_in | Negative supply pin, connected to ground for single-supply operation (Table 3 conditions). |
| 12 | Non-inverting input 4 | input | Non-inverting input of amplifier 4; for the LM224A variant the input voltage must stay between -0.3 V and VCC+ + 0.3 V (Table 1). |
| 13 | Inverting input 4 | input | Inverting input of amplifier 4; for the LM224A variant the input voltage must stay between -0.3 V and VCC+ + 0.3 V (Table 1). |
| 14 | Output 4 | output | Output of amplifier 4; the output short-circuit duration is infinite, and shorts to VCC can cause excessive heating if VCC > 15 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | TSSOP-14 |
| Category | Amplifiers/Comparators |
| Pins | 14 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | Abs | Updated cover page, Section 2 Absolute maximum ratings and operating conditions and | 18 |
CAD (KiCad official)
- Symbol:
LM224APT - Footprint:
Package_SO:TSSOP-14_4.4x5mm_P0.65mm - 3D model: TSSOP-14 (KiCad packages3D, STEP)
- 3D model files:
lm224apt-etched.step/lm224apt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm224apt.step/lm224apt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (22 pp, sha256
c1aa97669d6ca9c8, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).