LM21215MHX

{
  "schema_version": 1,
  "type": "component",
  "slug": "lm21215mhx",
  "title": "LM21215MHX",
  "brief": "Texas Instruments DC-DC Converters, HTSSOP-20-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "power management (pmic)",
    "lm21215mhx",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "LM21215MHX",
    "manufacturer": "Texas Instruments",
    "package": "HTSSOP-20-EP",
    "pin_count": 21,
    "category": "Power Management (PMIC)",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://www.ti.com/cn/lit/gpn/lm21215",
    "parts": {
      "symbol": "lm21215mhx.kicad_sym",
      "footprint": "lm21215mhx.kicad_mod",
      "model_3d": "lm21215mhx-hero.glb",
      "model_3d_plain": "lm21215mhx.glb",
      "model_3d_step": "lm21215mhx-etched.step",
      "model_3d_step_plain": "lm21215mhx.step",
      "lbr": "lm21215mhx.lbr"
    },
    "distributor_links": {
      "lcsc": "C2879347"
    },
    "distributor_check": {
      "checked_at": "2026-10-12T11:03:27Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "ILIM",
        "type": "passive",
        "description": "Resistor-programmable current limit pin; a resistor to ground sets the rising current limit ICLR, and shorting this pin to AGND selects the maximum possible current limit."
      },
      {
        "number": "2",
        "name": "SS/TRK",
        "type": "passive",
        "description": "Soft-start control pin; an internal 2 µA current source charges an external capacitor to AGND to set the start-up output ramp rate, and the pin also configures the tracking feature."
      },
      {
        "number": "3",
        "name": "EN",
        "type": "input",
        "description": "Active-high enable input for the device; if not used it can be left open, as an internal current source pulls it high."
      },
      {
        "number": "4",
        "name": "AVIN",
        "type": "power_in",
        "description": "Analog input supply that generates the internal bias, recommended to connect to PVIN through a low-pass RC filter; recommended range is 2.95 V to 5.5 V to GND."
      },
      {
        "number": "5",
        "name": "PVIN",
        "type": "power_in",
        "description": "Input voltage to the internal power switches, to be tied together with pins 6 and 7 at the device with low-ESR input capacitance placed as close as possible; recommended range is 2.95 V to 5.5 V to GND."
      },
      {
        "number": "6",
        "name": "PVIN",
        "type": "power_in",
        "description": "Input voltage to the internal power switches, to be tied together with pins 5 and 7 at the device with low-ESR input capacitance placed as close as possible; recommended range is 2.95 V to 5.5 V to GND."
      },
      {
        "number": "7",
        "name": "PVIN",
        "type": "power_in",
        "description": "Input voltage to the internal power switches, to be tied together with pins 5 and 6 at the device with low-ESR input capacitance placed as close as possible; recommended range is 2.95 V to 5.5 V to GND."
      },
      {
        "number": "8",
        "name": "PGND",
        "type": "power_in",
        "description": "Power ground pin for the internal power switches, to be grouped with pins 9 and 10."
      },
      {
        "number": "9",
        "name": "PGND",
        "type": "power_in",
        "description": "Power ground pin for the internal power switches, to be grouped with pins 8 and 10."
      },
      {
        "number": "10",
        "name": "PGND",
        "type": "power_in",
        "description": "Power ground pin for the internal power switches, to be grouped with pins 8 and 9."
      },
      {
        "number": "11",
        "name": "SW",
        "type": "output",
        "description": "Switch node pin, to be tied together locally with pins 12-16 and connected to the filter inductor."
      },
      {
        "number": "12",
        "name": "SW",
        "type": "output",
        "description": "Switch node pin, to be tied together locally with pins 11 and 13-16 and connected to the filter inductor."
      },
      {
        "number": "13",
        "name": "SW",
        "type": "output",
        "description": "Switch node pin, to be tied together locally with pins 11-12 and 14-16 and connected to the filter inductor."
      },
      {
        "number": "14",
        "name": "SW",
        "type": "output",
        "description": "Switch node pin, to be tied together locally with pins 11-13 and 15-16 and connected to the filter inductor."
      },
      {
        "number": "15",
        "name": "SW",
        "type": "output",
        "description": "Switch node pin, to be tied together locally with pins 11-14 and 16 and connected to the filter inductor."
      },
      {
        "number": "16",
        "name": "SW",
        "type": "output",
        "description": "Switch node pin, to be tied together locally with pins 11-15 and connected to the filter inductor."
      },
      {
        "number": "17",
        "name": "PGOOD",
        "type": "output",
        "description": "Open-drain power good indicator output."
      },
      {
        "number": "18",
        "name": "COMP",
        "type": "passive",
        "description": "Compensation pin connected to the output of the voltage loop error amplifier."
      },
      {
        "number": "19",
        "name": "FB",
        "type": "input",
        "description": "Feedback pin connected to the inverting input of the voltage loop error amplifier; the feedback reference is 0.6 V (±1%)."
      },
      {
        "number": "20",
        "name": "AGND",
        "type": "power_in",
        "description": "Quiet analog ground for the internal reference and bias circuitry."
      },
      {
        "number": "21",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The MPN LM21215MHX is not listed by name in the provided pages. The package option addendum (page 33; Table 5-1 groups pins 5,6,7 (PVIN), 8,9,10 (PGND) and 11-16 (SW). These were expanded to one entry p; The exposed pad is not numbered in the datasheet and is listed as 'EP'. It is included as a separate",
          "exposed pad 21 added from the footprint",
          "dropped thermal pad ['EP'] absent from footprint"
        ],
        "pages_sent": 7,
        "cost_usd": 0.0487,
        "at": "2026-10-12T11:03:04"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/lm21215",
        "pages": 40,
        "sha256": "08d986dd316137de",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 21,
        "described": 21,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lm21215mhx.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.41,
          6.5,
          1.2
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "f8062632c6201401bf24c4d1833f36483c84405dfc05325cb50795ce6201fe11",
        "checked": "2026-10-12",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lm21215mhx-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.41,
          6.5,
          1.2
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "1761c8bbb2f03b7e0e76f36d37689099e8451880a74d32b146a83e11e4fbcfe1",
        "checked": "2026-10-16",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "HTSSOP-20-EP",
      "Category": "Power Management (PMIC)",
      "Pins": "21"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "lm21215mhx"
  ],
  "discovery_pitch": "LM21215MHX (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray",
    "email": "[email protected]"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lm21215mhx.kicad_sym",
    "lm21215mhx.kicad_mod",
    "lm21215mhx.glb",
    "lm21215mhx.step",
    "lm21215mhx.lbr",
    "docs/hero.png",
    "docs/lm21215mhx-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lm21215mhx-hero.glb",
    "lm21215mhx-hero.overlay.json"
  ],
  "visibility": {
    "public": true
  }
}