main
History Download
Ray Publish 0.1.0 ecad017

LM211PW

Texas Instruments · Comparators · TSSOP-8

LM211PW from Texas Instruments, in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 EMIT OUT output Emitter of the open-collector NPN output stage, isolated from VCC-; the voltage from the emitter output to VCC- is limited to 30 V (absolute maximum), and EMIT OUT is grounded for the specified characteristics.
2 IN+ input Noninverting comparator input; the input voltage range is VCC- + 0.5 V to VCC+ - 1.5 V for
3 IN- input Inverting comparator input; the input voltage range is VCC- + 0.5 V to VCC+ - 1.5 V for
4 VCC- power_in Negative supply; the supply voltage VCC+ - VCC- is specified from 3.5 V to 30 V.
5 BALANCE input Offset balance pin for external offset adjustment; it must be left unconnected if offset balancing is not used (shorting it to BAL/STRB is also acceptable).
6 BAL/STRB input Strobe pin that must be current driven at -3 mA to -5 mA and must not be connected directly to ground; the output is turned off when current is pulled from it, and it must be left unconnected if offset balancing and strobing are not used.
7 COL OUT output Open-collector NPN output of the comparator, which can be wire-OR connected; the voltage from collector output to VCC- is limited to 50 V for the LM211 (absolute maximum).
8 VCC+ power_in Positive supply; the supply voltage VCC+ - VCC- is specified from 3.5 V to 30 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSSOP-8
Category Operational Amplifier/Comparator
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input offset voltage VIO 2 7.5 mV See note (3); 25°C 6
Input offset voltage VIO 10 mV See note (3); full range 6
Input offset current IIO 6 50 nA See note (3); 25°C 6
Input offset current IIO 70 nA See note (3); full range 6
Input bias current IIB 100 250 nA 1 V ≤ VO ≤ 14 V; 25°C 6
Input bias current IIB 300 nA 1 V ≤ VO ≤ 14 V; full range 6
Common-mode input-voltage range, lower range VICR -14.7 V Lower range; 25°C 6
Common-mode input-voltage range, lower range VICR -14.5 V Lower range; full range 6
Common-mode input-voltage range, upper range VICR 13 13.8 V Upper range 6
Large-signal differential-voltage amplification AVD 40 200 V/mV 5 V ≤ VO ≤ 35 V, RL = 1 kΩ; 25°C 6
High-level (collector) output leakage current IOH 0.2 10 nA I(strobe) = -3 mA, VID = 5 mV, VOH = 35 V; 25°C 6
High-level (collector) output leakage current IOH 0.5 μA I(strobe) = -3 mA, VID = 5 mV, VOH = 35 V; full range 6
High-level (collector) output leakage current IOH 0.2 50 nA VID = 5 mV, VOH = 35 V; 25°C 6
Low-level (collector-to-emitter) output voltage VOL 0.75 1.5 V IOL = 50 mA, VID = -5 mV; 25°C 6
Low-level (collector-to-emitter) output voltage VOL 0.23 0.4 V VCC+ = 4.5 V, VCC- = 0 V, IOL = 8 mA, VID = -6 mV; full range 6
Supply current from VCC+ (output low) ICC+ 5.1 7.5 mA VID = -10 mV, No load; 25°C 6
Supply current from VCC- (output high) ICC- -4.1 -5 mA VID = 10 mV, No load; 25°C 6
Supply voltage VCC+, VCC- 3.5 30 V 4
Operating free-air temperature range TA -40 85 °C LM211 4
Supply voltage VCC+ 18 V Referenced to midpoint of VCC+ and VCC- 4
Supply voltage VCC- -18 V Referenced to midpoint of VCC+ and VCC- 4
Supply voltage, VCC+, VCC- VCC+, VCC- 36 V 4
Differential input voltage VID -30 30 V Differential voltage at IN+ with respect to IN- 4
Input voltage (either input) VI -15 15 V Either input; magnitude must not exceed supply magnitude or ±15 V, whichever is less 4
Voltage from emitter output to VCC- 30 V 4
Voltage from collector output to VCC- (LM211) 50 V LM211 4
Duration of output short circuit to ground 10 s To ground 4
Operating virtual-junction temperature TJ 150 °C 4
Lead temperature 260 °C 1,6 mm (1/16 inch) from case, 60 s; D, P, PS, or PW package 4
Storage temperature Tstg -65 150 °C 4
Electrostatic discharge, human body model (HBM) V(ESD) -500 500 V Per ANSI/ESDA/JEDEC JS-001 4
Electrostatic discharge, charged-device model (CDM) V(ESD) -750 750 V Per JEDEC JESD22-C101 4
Junction-to-ambient thermal resistance RθJA 162 °C/W PW (TSSOP) 8-pin package 5
Junction-to-case (top) thermal resistance RθJC(top) 44.6 °C/W PW (TSSOP) 8-pin package 5
Junction-to-board thermal resistance RθJB 93 °C/W PW (TSSOP) 8-pin package 5
Junction-to-top characterization parameter ψJT 2.6 °C/W PW (TSSOP) 8-pin package 5
Junction-to-board characterization parameter ψJB 90.8 °C/W PW (TSSOP) 8-pin package 5

CAD (KiCad official)

  • Symbol: LM211PW
  • Footprint: Package_SO:TSSOP-8_4.4x3mm_P0.65mm
  • 3D model: TSSOP-8 (KiCad packages3D, STEP)
  • 3D model files: lm211pw-etched.step / lm211pw-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm211pw.step / lm211pw.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (42 pp, sha256 1877bb45737cb7e8, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF