Generated by kicad-footprint-generator · KiCad file format 20260206
LM211PW
Texas Instruments · Comparators · TSSOP-8
LM211PW from Texas Instruments, in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EMIT OUT | output | Emitter of the open-collector NPN output stage, isolated from VCC-; the voltage from the emitter output to VCC- is limited to 30 V (absolute maximum), and EMIT OUT is grounded for the specified characteristics. |
| 2 | IN+ | input | Noninverting comparator input; the input voltage range is VCC- + 0.5 V to VCC+ - 1.5 V for |
| 3 | IN- | input | Inverting comparator input; the input voltage range is VCC- + 0.5 V to VCC+ - 1.5 V for |
| 4 | VCC- | power_in | Negative supply; the supply voltage VCC+ - VCC- is specified from 3.5 V to 30 V. |
| 5 | BALANCE | input | Offset balance pin for external offset adjustment; it must be left unconnected if offset balancing is not used (shorting it to BAL/STRB is also acceptable). |
| 6 | BAL/STRB | input | Strobe pin that must be current driven at -3 mA to -5 mA and must not be connected directly to ground; the output is turned off when current is pulled from it, and it must be left unconnected if offset balancing and strobing are not used. |
| 7 | COL OUT | output | Open-collector NPN output of the comparator, which can be wire-OR connected; the voltage from collector output to VCC- is limited to 50 V for the LM211 (absolute maximum). |
| 8 | VCC+ | power_in | Positive supply; the supply voltage VCC+ - VCC- is specified from 3.5 V to 30 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-8 |
| Category | Operational Amplifier/Comparator |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | VIO | 2 | 7.5 | mV | See note (3); 25°C | 6 | |
| Input offset voltage | VIO | 10 | mV | See note (3); full range | 6 | ||
| Input offset current | IIO | 6 | 50 | nA | See note (3); 25°C | 6 | |
| Input offset current | IIO | 70 | nA | See note (3); full range | 6 | ||
| Input bias current | IIB | 100 | 250 | nA | 1 V ≤ VO ≤ 14 V; 25°C | 6 | |
| Input bias current | IIB | 300 | nA | 1 V ≤ VO ≤ 14 V; full range | 6 | ||
| Common-mode input-voltage range, lower range | VICR | -14.7 | V | Lower range; 25°C | 6 | ||
| Common-mode input-voltage range, lower range | VICR | -14.5 | V | Lower range; full range | 6 | ||
| Common-mode input-voltage range, upper range | VICR | 13 | 13.8 | V | Upper range | 6 | |
| Large-signal differential-voltage amplification | AVD | 40 | 200 | V/mV | 5 V ≤ VO ≤ 35 V, RL = 1 kΩ; 25°C | 6 | |
| High-level (collector) output leakage current | IOH | 0.2 | 10 | nA | I(strobe) = -3 mA, VID = 5 mV, VOH = 35 V; 25°C | 6 | |
| High-level (collector) output leakage current | IOH | 0.5 | μA | I(strobe) = -3 mA, VID = 5 mV, VOH = 35 V; full range | 6 | ||
| High-level (collector) output leakage current | IOH | 0.2 | 50 | nA | VID = 5 mV, VOH = 35 V; 25°C | 6 | |
| Low-level (collector-to-emitter) output voltage | VOL | 0.75 | 1.5 | V | IOL = 50 mA, VID = -5 mV; 25°C | 6 | |
| Low-level (collector-to-emitter) output voltage | VOL | 0.23 | 0.4 | V | VCC+ = 4.5 V, VCC- = 0 V, IOL = 8 mA, VID = -6 mV; full range | 6 | |
| Supply current from VCC+ (output low) | ICC+ | 5.1 | 7.5 | mA | VID = -10 mV, No load; 25°C | 6 | |
| Supply current from VCC- (output high) | ICC- | -4.1 | -5 | mA | VID = 10 mV, No load; 25°C | 6 | |
| Supply voltage | VCC+, VCC- | 3.5 | 30 | V | 4 | ||
| Operating free-air temperature range | TA | -40 | 85 | °C | LM211 | 4 | |
| Supply voltage | VCC+ | 18 | V | Referenced to midpoint of VCC+ and VCC- | 4 | ||
| Supply voltage | VCC- | -18 | V | Referenced to midpoint of VCC+ and VCC- | 4 | ||
| Supply voltage, VCC+, VCC- | VCC+, VCC- | 36 | V | 4 | |||
| Differential input voltage | VID | -30 | 30 | V | Differential voltage at IN+ with respect to IN- | 4 | |
| Input voltage (either input) | VI | -15 | 15 | V | Either input; magnitude must not exceed supply magnitude or ±15 V, whichever is less | 4 | |
| Voltage from emitter output to VCC- | 30 | V | 4 | ||||
| Voltage from collector output to VCC- (LM211) | 50 | V | LM211 | 4 | |||
| Duration of output short circuit to ground | 10 | s | To ground | 4 | |||
| Operating virtual-junction temperature | TJ | 150 | °C | 4 | |||
| Lead temperature | 260 | °C | 1,6 mm (1/16 inch) from case, 60 s; D, P, PS, or PW package | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Electrostatic discharge, human body model (HBM) | V(ESD) | -500 | 500 | V | Per ANSI/ESDA/JEDEC JS-001 | 4 | |
| Electrostatic discharge, charged-device model (CDM) | V(ESD) | -750 | 750 | V | Per JEDEC JESD22-C101 | 4 | |
| Junction-to-ambient thermal resistance | RθJA | 162 | °C/W | PW (TSSOP) 8-pin package | 5 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 44.6 | °C/W | PW (TSSOP) 8-pin package | 5 | ||
| Junction-to-board thermal resistance | RθJB | 93 | °C/W | PW (TSSOP) 8-pin package | 5 | ||
| Junction-to-top characterization parameter | ψJT | 2.6 | °C/W | PW (TSSOP) 8-pin package | 5 | ||
| Junction-to-board characterization parameter | ψJB | 90.8 | °C/W | PW (TSSOP) 8-pin package | 5 |
CAD (KiCad official)
- Symbol:
LM211PW - Footprint:
Package_SO:TSSOP-8_4.4x3mm_P0.65mm - 3D model: TSSOP-8 (KiCad packages3D, STEP)
- 3D model files:
lm211pw-etched.step/lm211pw-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm211pw.step/lm211pw.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (42 pp, sha256
1877bb45737cb7e8, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).