main
History Download
Ray Publish 0.1.0 071f23b

LM211DR

UMW · Comparators · SOP-8

LM211DR from UMW, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 EMIT OUT output Output emitter of the comparator, used as an emitter-follower output with the load referenced to the negative supply (Figure 8 test load RL = 600 Ω).
2 IN+ input Noninverting comparator input; the input voltage rating is ±15 V for a ±15 V supply, and the common-mode range is given in the electrical characteristics.
3 IN- input Inverting comparator input; the input voltage rating is ±15 V for a ±15 V supply, and the differential input voltage limit is ±30 V.
4 VEE power_in Negative power supply pin; the total supply voltage
5 BALANCE input Balance pin used for input offset nulling, with no separate electrical limit stated in the datasheet.
6 BAL/STRB input Strobe/balance pin that must not be grounded directly and must be driven with 3 mA to 5 mA of current to gate the output; strobe pin voltage is limited to VCC to VCC-5.
7 COL OUT output Open-collector comparator output that can sink up to 50 mA (IOL) and switch up to 50 V (VO-VEE) for LM211.
8 VCC+ power_in Positive power supply pin; the device operates from a single 5 V to 30 V supply or a dual ±15 V supply, with total supply voltage rated at 36 V maximum.

Key specifications

Parameter Value
Manufacturer UMW
Package SOP-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Total supply voltage VCC+/VEE/ 36 V 3
Output to negative supply voltage VO-VEE 50 V LM211 column 3
Ground to negative power supply VEE 30 V 3
Input differential voltage VID -30 30 V 3
Input voltage Vin -15 15 V 3
Operating ambient temperature TA -40 85 °C LM211 column 3
Operating junction temperature range TJ(max) 150 °C 3
Storage temperature TSTG -65 150 °C 3
Power consumption (plastic DIP package) PD 625 mW plastic package DIP; TA decreases when it exceeds 25°C 3
Power derating 5 mW/°C plastic package DIP; applies when TA exceeds 25°C 3
Supply voltage (single supply) 5 30 V single power supply, per description; dual supply ±15 V also stated 1

CAD (KiCad official)

  • Symbol: LM211DR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: lm211dr-etched.step / lm211dr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm211dr.step / lm211dr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: UMW datasheet (12 pp, sha256 d3411de2121302d1, retrieved 2026-11-04, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF