Generated by kicad-footprint-generator · KiCad file format 20260206
LM211DR
UMW · Comparators · SOP-8
LM211DR from UMW, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EMIT OUT | output | Output emitter of the comparator, used as an emitter-follower output with the load referenced to the negative supply (Figure 8 test load RL = 600 Ω). |
| 2 | IN+ | input | Noninverting comparator input; the input voltage rating is ±15 V for a ±15 V supply, and the common-mode range is given in the electrical characteristics. |
| 3 | IN- | input | Inverting comparator input; the input voltage rating is ±15 V for a ±15 V supply, and the differential input voltage limit is ±30 V. |
| 4 | VEE | power_in | Negative power supply pin; the total supply voltage |
| 5 | BALANCE | input | Balance pin used for input offset nulling, with no separate electrical limit stated in the datasheet. |
| 6 | BAL/STRB | input | Strobe/balance pin that must not be grounded directly and must be driven with 3 mA to 5 mA of current to gate the output; strobe pin voltage is limited to VCC to VCC-5. |
| 7 | COL OUT | output | Open-collector comparator output that can sink up to 50 mA (IOL) and switch up to 50 V (VO-VEE) for LM211. |
| 8 | VCC+ | power_in | Positive power supply pin; the device operates from a single 5 V to 30 V supply or a dual ±15 V supply, with total supply voltage rated at 36 V maximum. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | UMW |
| Package | SOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Total supply voltage | VCC+/VEE/ | 36 | V | 3 | |||
| Output to negative supply voltage | VO-VEE | 50 | V | LM211 column | 3 | ||
| Ground to negative power supply | VEE | 30 | V | 3 | |||
| Input differential voltage | VID | -30 | 30 | V | 3 | ||
| Input voltage | Vin | -15 | 15 | V | 3 | ||
| Operating ambient temperature | TA | -40 | 85 | °C | LM211 column | 3 | |
| Operating junction temperature range | TJ(max) | 150 | °C | 3 | |||
| Storage temperature | TSTG | -65 | 150 | °C | 3 | ||
| Power consumption (plastic DIP package) | PD | 625 | mW | plastic package DIP; TA decreases when it exceeds 25°C | 3 | ||
| Power derating | 5 | mW/°C | plastic package DIP; applies when TA exceeds 25°C | 3 | |||
| Supply voltage (single supply) | 5 | 30 | V | single power supply, per description; dual supply ±15 V also stated | 1 |
CAD (KiCad official)
- Symbol:
LM211DR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
lm211dr-etched.step/lm211dr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm211dr.step/lm211dr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: UMW datasheet (12 pp, sha256
d3411de2121302d1, retrieved 2026-11-04, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).