main
Ray
Publish 0.1.0
19e1b67
LM20242MHE
Texas Instruments · DC-DC Converters · HTSSOP-20-EP
LM20242MHE from Texas Instruments, in a HTSSOP-20-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SS/TRK | input | An internal 5 µA current source charges an external capacitor to set the soft-start rate, and the PWM can track an external voltage ramp with a low impedance source. |
| 2 | FB | input | This pin is connected to the inverting input of the internal transconductance error amplifier, which has an internal 800 mV reference on its non-inverting input. |
| 3 | PGOOD | output | Open drain power good output indicates the output voltage is regulating within tolerance, and a 10 kΩ to 100 kΩ pull-up resistor is recommended if used. |
| 4 | COMP | passive | Output of the internal error amplifier and input to the PWM, with the loop compensation network connected between this pin and AGND. |
| 5 | VIN | power_in | Input supply voltage with a nominal operating range of 4.5V to 36V. |
| 6 | VIN | power_in | Input supply voltage with a nominal operating range of 4.5V to 36V. |
| 7 | SW | output | Switch pin that is the drain terminal of the internal synchronous rectifier power NMOSFET and the source terminal of the internal control power NMOSFET. |
| 8 | SW | output | Switch pin that is the drain terminal of the internal synchronous rectifier power NMOSFET and the source terminal of the internal control power NMOSFET. |
| 9 | GND | power_in | Ground that provides the internal reference for the power MOSFETs. |
| 10 | GND | power_in | Ground that provides the internal reference for the power MOSFETs. |
| 11 | GND | power_in | Ground that provides the internal reference for the power MOSFETs. |
| 12 | AGND | power_in | Analog ground that provides the internal reference for the regulator control functions. |
| 13 | SW | output | Switch pin that is the drain terminal of the internal synchronous rectifier power NMOSFET and the source terminal of the internal control power NMOSFET. |
| 14 | SW | output | Switch pin that is the drain terminal of the internal synchronous rectifier power NMOSFET and the source terminal of the internal control power NMOSFET. |
| 15 | VIN | power_in | Input supply voltage with a nominal operating range of 4.5V to 36V. |
| 16 | VIN | power_in | Input supply voltage with a nominal operating range of 4.5V to 36V. |
| 17 | BOOT | input | Boost input for the bootstrap capacitor, which is charged through an internal diode from VCC and is required from SW to BOOT to power the control MOSFET gate driver. |
| 18 | VCC | power_out | Output of the high voltage linear regulator that tracks VIN up to about 7.2V and is regulated to approximately 5.5V, requiring a 0.1 µF to 1 µF ceramic decoupling capacitor. |
| 19 | EN | input | Enable or UVLO input where an external voltage divider sets the line undervoltage lockout threshold, and a 2 µA internal pull-up enables the regulator if left unconnected. |
| 20 | RT | input | Internal oscillator frequency adjust input normally biased at 550 mV, where an external resistor between RT and AGND sets the oscillator frequency. |
| 21 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | HTSSOP-20-EP |
| Category | Power Supply Chip |
| Pins | 21 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN to GND | VIN | -0.3 | 38 | V | 3 | ||
| BOOT to GND | BOOT | -0.3 | 43 | V | 3 | ||
| BOOT to SW | BOOT-SW | -0.3 | 7 | V | 3 | ||
| SW to GND | SW | -0.5 | 38 | V | 3 | ||
| SW to GND transient | SW | -1.5 | V | < 20 ns | 3 | ||
| FB, EN, SS/TRK, PGOOD to GND | -0.3 | 6 | V | 3 | |||
| VCC to GND | VCC | -0.3 | 8 | V | 3 | ||
| Storage Temperature | -65 | 150 | °C | 3 | |||
| ESD Rating Human Body Model | 2 | kV | Human Body Model | 3 | |||
| VIN to GND operating range | VIN | 4.5 | 36 | V | 3 | ||
| Junction Temperature operating range | TJ | -40 | 125 | °C | 3 | ||
| Feedback pin voltage | VFB | 0.788 | 0.8 | 0.812 | V | VVIN = 4.5V to 36V; VCOMP = 500 mV to 700 mV | 3 |
| High-Side MOSFET On-Resistance | RHSW-DS(ON) | 130 | 225 | mΩ | ISW = 200 mA | 3 | |
| Low-Side MOSFET On-Resistance | RLSW-DS(ON) | 110 | 190 | mΩ | ISW = 200 mA | 3 | |
| Operating Quiescent Current | IQ | 2 | 3 | mA | VVIN = 4.5V to 36V | 3 | |
| Shutdown Quiescent current | ISD | 150 | 180 | µA | VEN = 0V | 3 | |
| VIN Under Voltage Lockout Rising | VUVLO | 3.65 | 3.9 | 4.2 | V | 3 | |
| Soft-Start Pin Source Current | ISS | 3 | 5 | 7 | µA | VSS = 0V | 3 |
| VFB(OVP) Over Voltage Protection Rising Threshold | VFB(OVP) / VFB | 107 | 110 | 112 | % | 3 | |
| VFB(PG) PGOOD Rising Threshold | VFB(PG) / VFB | 93 | 95 | 97 | % | 3 | |
| Switching Frequency 1 | FSW1 | 675 | 750 | 825 | kHz | RRT = 49.9 kΩ | 4 |
| Switching Frequency 2 | FSW2 | 225 | 250 | 325 | kHz | RRT = 249 kΩ | 4 |
| Error Amplifier DC Transconductance | gm | 400 | 515 | 600 | µmho | ICOMP = -50 µA to +50 µA | 4 |
| Cycle By Cycle Current Limit | ILIM | 3.1 | 3.7 | 4.65 | A | 4 | |
| EN Pin Rising Threshold | VEN(RISING) | 1.2 | 1.25 | 1.3 | V | 4 | |
| Junction to Case thermal resistance | θJC | 5.6 | °C/W | 4 | |||
| Junction to Ambient thermal resistance | θJA | 30 | °C/W | 0 LFM airflow | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | Abs | Human Body Model (2) 2kV (1) Absolute Maximum Ratings indicate limits beyond witch damage to the device may occur. Operating Ratings indicate conditions for | 3 | |
| contacts | copper | inductor should be placed as close as possible to the SW pin and output capacitor. 2. Minimize the copper area of the switch node. Since the LM20242 has the SW pins on opposite sides of the | 21 |
CAD (KiCad official)
- Symbol:
LM20242MHE - Footprint:
Package_SO:TSSOP-20-1EP_4.4x6.5mm_P0.65mm_EP2.15x3.35mm - 3D model: HTSSOP-20-EP (KiCad packages3D, STEP)
- 3D model files:
lm20242mhe-etched.step/lm20242mhe-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm20242mhe.step/lm20242mhe.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (32 pp, sha256
860788d839eb1f90, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LM20242MHE
**Texas Instruments** · DC-DC Converters · HTSSOP-20-EP
LM20242MHE from Texas Instruments, in a HTSSOP-20-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SS/TRK | input | An internal 5 µA current source charges an external capacitor to set the soft-start rate, and the PWM can track an external voltage ramp with a low impedance source. |
| 2 | FB | input | This pin is connected to the inverting input of the internal transconductance error amplifier, which has an internal 800 mV reference on its non-inverting input. |
| 3 | PGOOD | output | Open drain power good output indicates the output voltage is regulating within tolerance, and a 10 kΩ to 100 kΩ pull-up resistor is recommended if used. |
| 4 | COMP | passive | Output of the internal error amplifier and input to the PWM, with the loop compensation network connected between this pin and AGND. |
| 5 | VIN | power_in | Input supply voltage with a nominal operating range of 4.5V to 36V. |
| 6 | VIN | power_in | Input supply voltage with a nominal operating range of 4.5V to 36V. |
| 7 | SW | output | Switch pin that is the drain terminal of the internal synchronous rectifier power NMOSFET and the source terminal of the internal control power NMOSFET. |
| 8 | SW | output | Switch pin that is the drain terminal of the internal synchronous rectifier power NMOSFET and the source terminal of the internal control power NMOSFET. |
| 9 | GND | power_in | Ground that provides the internal reference for the power MOSFETs. |
| 10 | GND | power_in | Ground that provides the internal reference for the power MOSFETs. |
| 11 | GND | power_in | Ground that provides the internal reference for the power MOSFETs. |
| 12 | AGND | power_in | Analog ground that provides the internal reference for the regulator control functions. |
| 13 | SW | output | Switch pin that is the drain terminal of the internal synchronous rectifier power NMOSFET and the source terminal of the internal control power NMOSFET. |
| 14 | SW | output | Switch pin that is the drain terminal of the internal synchronous rectifier power NMOSFET and the source terminal of the internal control power NMOSFET. |
| 15 | VIN | power_in | Input supply voltage with a nominal operating range of 4.5V to 36V. |
| 16 | VIN | power_in | Input supply voltage with a nominal operating range of 4.5V to 36V. |
| 17 | BOOT | input | Boost input for the bootstrap capacitor, which is charged through an internal diode from VCC and is required from SW to BOOT to power the control MOSFET gate driver. |
| 18 | VCC | power_out | Output of the high voltage linear regulator that tracks VIN up to about 7.2V and is regulated to approximately 5.5V, requiring a 0.1 µF to 1 µF ceramic decoupling capacitor. |
| 19 | EN | input | Enable or UVLO input where an external voltage divider sets the line undervoltage lockout threshold, and a 2 µA internal pull-up enables the regulator if left unconnected. |
| 20 | RT | input | Internal oscillator frequency adjust input normally biased at 550 mV, where an external resistor between RT and AGND sets the oscillator frequency. |
| 21 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | HTSSOP-20-EP |
| Category | Power Supply Chip |
| Pins | 21 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN to GND | VIN | -0.3 | | 38 | V | | 3 |
| BOOT to GND | BOOT | -0.3 | | 43 | V | | 3 |
| BOOT to SW | BOOT-SW | -0.3 | | 7 | V | | 3 |
| SW to GND | SW | -0.5 | | 38 | V | | 3 |
| SW to GND transient | SW | -1.5 | | | V | < 20 ns | 3 |
| FB, EN, SS/TRK, PGOOD to GND | | -0.3 | | 6 | V | | 3 |
| VCC to GND | VCC | -0.3 | | 8 | V | | 3 |
| Storage Temperature | | -65 | | 150 | °C | | 3 |
| ESD Rating Human Body Model | | | | 2 | kV | Human Body Model | 3 |
| VIN to GND operating range | VIN | 4.5 | | 36 | V | | 3 |
| Junction Temperature operating range | TJ | -40 | | 125 | °C | | 3 |
| Feedback pin voltage | VFB | 0.788 | 0.8 | 0.812 | V | VVIN = 4.5V to 36V; VCOMP = 500 mV to 700 mV | 3 |
| High-Side MOSFET On-Resistance | RHSW-DS(ON) | | 130 | 225 | mΩ | ISW = 200 mA | 3 |
| Low-Side MOSFET On-Resistance | RLSW-DS(ON) | | 110 | 190 | mΩ | ISW = 200 mA | 3 |
| Operating Quiescent Current | IQ | | 2 | 3 | mA | VVIN = 4.5V to 36V | 3 |
| Shutdown Quiescent current | ISD | | 150 | 180 | µA | VEN = 0V | 3 |
| VIN Under Voltage Lockout Rising | VUVLO | 3.65 | 3.9 | 4.2 | V | | 3 |
| Soft-Start Pin Source Current | ISS | 3 | 5 | 7 | µA | VSS = 0V | 3 |
| VFB(OVP) Over Voltage Protection Rising Threshold | VFB(OVP) / VFB | 107 | 110 | 112 | % | | 3 |
| VFB(PG) PGOOD Rising Threshold | VFB(PG) / VFB | 93 | 95 | 97 | % | | 3 |
| Switching Frequency 1 | FSW1 | 675 | 750 | 825 | kHz | RRT = 49.9 kΩ | 4 |
| Switching Frequency 2 | FSW2 | 225 | 250 | 325 | kHz | RRT = 249 kΩ | 4 |
| Error Amplifier DC Transconductance | gm | 400 | 515 | 600 | µmho | ICOMP = -50 µA to +50 µA | 4 |
| Cycle By Cycle Current Limit | ILIM | 3.1 | 3.7 | 4.65 | A | | 4 |
| EN Pin Rising Threshold | VEN(RISING) | 1.2 | 1.25 | 1.3 | V | | 4 |
| Junction to Case thermal resistance | θJC | | 5.6 | | °C/W | | 4 |
| Junction to Ambient thermal resistance | θJA | | 30 | | °C/W | 0 LFM airflow | 4 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | Abs | | Human Body Model (2) 2kV (1) Absolute Maximum Ratings indicate limits beyond witch damage to the device may occur. Operating Ratings indicate conditions for | 3 |
| contacts | copper | | inductor should be placed as close as possible to the SW pin and output capacitor. 2. Minimize the copper area of the switch node. Since the LM20242 has the SW pins on opposite sides of the | 21 |
## CAD (KiCad official)
- Symbol: `LM20242MHE`
- Footprint: `Package_SO:TSSOP-20-1EP_4.4x6.5mm_P0.65mm_EP2.15x3.35mm`
- 3D model: HTSSOP-20-EP (KiCad packages3D, STEP)
- 3D model files: `lm20242mhe-etched.step` / `lm20242mhe-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm20242mhe.step` / `lm20242mhe.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/lm20242.pdf) (32 pp, sha256 `860788d839eb1f90`, retrieved 2026-11-05, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lm20242mhe-datasheet.pdf)