main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers lm20242mhe: viewers · Ray
lm20242mhe-etched.glb Publish 0.1.0 · Ray
lm20242mhe-etched.step lm20242mhe: factory component page (tier=mfr) · Ray
lm20242mhe-hero.glb lm20242mhe: hero GLB from the etched model (keeps the MPN mark) · Ray
lm20242mhe-hero.overlay.json Publish 0.1.0 · Ray
lm20242mhe.glb Publish 0.1.0 · Ray
lm20242mhe.kicad_mod Publish 0.1.0 · Ray
lm20242mhe.kicad_sym Publish 0.1.0 · Ray
lm20242mhe.lbr Publish 0.1.0 · Ray
lm20242mhe.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 21 pins · Ray

LM20242MHE

Texas Instruments · DC-DC Converters · HTSSOP-20-EP

LM20242MHE from Texas Instruments, in a HTSSOP-20-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SS/TRK input An internal 5 µA current source charges an external capacitor to set the soft-start rate, and the PWM can track an external voltage ramp with a low impedance source.
2 FB input This pin is connected to the inverting input of the internal transconductance error amplifier, which has an internal 800 mV reference on its non-inverting input.
3 PGOOD output Open drain power good output indicates the output voltage is regulating within tolerance, and a 10 kΩ to 100 kΩ pull-up resistor is recommended if used.
4 COMP passive Output of the internal error amplifier and input to the PWM, with the loop compensation network connected between this pin and AGND.
5 VIN power_in Input supply voltage with a nominal operating range of 4.5V to 36V.
6 VIN power_in Input supply voltage with a nominal operating range of 4.5V to 36V.
7 SW output Switch pin that is the drain terminal of the internal synchronous rectifier power NMOSFET and the source terminal of the internal control power NMOSFET.
8 SW output Switch pin that is the drain terminal of the internal synchronous rectifier power NMOSFET and the source terminal of the internal control power NMOSFET.
9 GND power_in Ground that provides the internal reference for the power MOSFETs.
10 GND power_in Ground that provides the internal reference for the power MOSFETs.
11 GND power_in Ground that provides the internal reference for the power MOSFETs.
12 AGND power_in Analog ground that provides the internal reference for the regulator control functions.
13 SW output Switch pin that is the drain terminal of the internal synchronous rectifier power NMOSFET and the source terminal of the internal control power NMOSFET.
14 SW output Switch pin that is the drain terminal of the internal synchronous rectifier power NMOSFET and the source terminal of the internal control power NMOSFET.
15 VIN power_in Input supply voltage with a nominal operating range of 4.5V to 36V.
16 VIN power_in Input supply voltage with a nominal operating range of 4.5V to 36V.
17 BOOT input Boost input for the bootstrap capacitor, which is charged through an internal diode from VCC and is required from SW to BOOT to power the control MOSFET gate driver.
18 VCC power_out Output of the high voltage linear regulator that tracks VIN up to about 7.2V and is regulated to approximately 5.5V, requiring a 0.1 µF to 1 µF ceramic decoupling capacitor.
19 EN input Enable or UVLO input where an external voltage divider sets the line undervoltage lockout threshold, and a 2 µA internal pull-up enables the regulator if left unconnected.
20 RT input Internal oscillator frequency adjust input normally biased at 550 mV, where an external resistor between RT and AGND sets the oscillator frequency.
21 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package HTSSOP-20-EP
Category Power Supply Chip
Pins 21

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VIN to GND VIN -0.3 38 V 3
BOOT to GND BOOT -0.3 43 V 3
BOOT to SW BOOT-SW -0.3 7 V 3
SW to GND SW -0.5 38 V 3
SW to GND transient SW -1.5 V < 20 ns 3
FB, EN, SS/TRK, PGOOD to GND -0.3 6 V 3
VCC to GND VCC -0.3 8 V 3
Storage Temperature -65 150 °C 3
ESD Rating Human Body Model 2 kV Human Body Model 3
VIN to GND operating range VIN 4.5 36 V 3
Junction Temperature operating range TJ -40 125 °C 3
Feedback pin voltage VFB 0.788 0.8 0.812 V VVIN = 4.5V to 36V; VCOMP = 500 mV to 700 mV 3
High-Side MOSFET On-Resistance RHSW-DS(ON) 130 225 mΩ ISW = 200 mA 3
Low-Side MOSFET On-Resistance RLSW-DS(ON) 110 190 mΩ ISW = 200 mA 3
Operating Quiescent Current IQ 2 3 mA VVIN = 4.5V to 36V 3
Shutdown Quiescent current ISD 150 180 µA VEN = 0V 3
VIN Under Voltage Lockout Rising VUVLO 3.65 3.9 4.2 V 3
Soft-Start Pin Source Current ISS 3 5 7 µA VSS = 0V 3
VFB(OVP) Over Voltage Protection Rising Threshold VFB(OVP) / VFB 107 110 112 % 3
VFB(PG) PGOOD Rising Threshold VFB(PG) / VFB 93 95 97 % 3
Switching Frequency 1 FSW1 675 750 825 kHz RRT = 49.9 kΩ 4
Switching Frequency 2 FSW2 225 250 325 kHz RRT = 249 kΩ 4
Error Amplifier DC Transconductance gm 400 515 600 µmho ICOMP = -50 µA to +50 µA 4
Cycle By Cycle Current Limit ILIM 3.1 3.7 4.65 A 4
EN Pin Rising Threshold VEN(RISING) 1.2 1.25 1.3 V 4
Junction to Case thermal resistance θJC 5.6 °C/W 4
Junction to Ambient thermal resistance θJA 30 °C/W 0 LFM airflow 4

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing Abs Human Body Model (2) 2kV (1) Absolute Maximum Ratings indicate limits beyond witch damage to the device may occur. Operating Ratings indicate conditions for 3
contacts copper inductor should be placed as close as possible to the SW pin and output capacitor. 2. Minimize the copper area of the switch node. Since the LM20242 has the SW pins on opposite sides of the 21

CAD (KiCad official)

  • Symbol: LM20242MHE
  • Footprint: Package_SO:TSSOP-20-1EP_4.4x6.5mm_P0.65mm_EP2.15x3.35mm
  • 3D model: HTSSOP-20-EP (KiCad packages3D, STEP)
  • 3D model files: lm20242mhe-etched.step / lm20242mhe-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm20242mhe.step / lm20242mhe.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (32 pp, sha256 860788d839eb1f90, retrieved 2026-11-05, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF