Generated by kicad-footprint-generator · KiCad file format 20260206
LKP2872ST-33
LKWIC · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
LKP2872ST-33 from LKWIC, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Input supply (1.8V to 15V recommended operating range); a 1µF to 10µF ceramic capacitor to GND is recommended. |
| 2 | GND | power_in | Ground. |
| 3 | SHDN# | input | Output shutdown pin that must be connected to IN, and the device will not operate if it is left floating. |
| 4 | BYP | passive | On fixed-output versions, a 0.01µF ceramic capacitor between this pin and OUT reduces output noise to 20µVRMS (10Hz to 100kHz), and the pin must be left floating if unused. |
| 5 | OUT | power_out | Regulated output; connect a ceramic or tantalum capacitor of at least 1µF to GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | LKWIC |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage (IN/SHDN# pin) | VIN | -18 | 18 | V | 5 | ||
| BYP pin voltage | -0.6 | 0.6 | V | 5 | |||
| ADJ pin voltage | -7 | 7 | V | 5 | |||
| Output voltage (OUT pin) | VOUT | -18 | 18 | V | 5 | ||
| Storage temperature | TSTG | -65 | 150 | ℃ | 5 | ||
| Junction temperature | Tj | 150 | ℃ | 5 | |||
| Input voltage (IN pin) | VIN | 1.8 | 15 | V | 5 | ||
| Operating temperature | TA | -40 | 125 | ℃ | 5 | ||
| Minimum input voltage | 1.8 | 2.3 | V | ILOAD = 100mA | 6 | ||
| Output voltage (LKP2872ST-33) | 3.19 | 3.3 | 3.4 | V | 4.3V < VIN < 18V, 1mA < ILOAD < 100mA | 6 | |
| Line regulation (LKP2872ST-33) | 1 | 10 | mV | ILOAD = 1mA | 6 | ||
| Load regulation (LKP2872ST-33) | 20 | 100 | mV | VIN = 4.3V, ΔILOAD = 1mA to 100mA | 6 | ||
| Dropout voltage | 0.1 | 0.19 | V | ILOAD = 1mA | 6 | ||
| Dropout voltage | 0.17 | 0.29 | V | ILOAD = 10mA | 6 | ||
| Dropout voltage | 0.24 | 0.38 | V | ILOAD = 50mA | 6 | ||
| Dropout voltage | 0.3 | 0.45 | V | ILOAD = 100mA | 6 | ||
| GND pin current | 20 | 45 | μA | ILOAD = 0mA | 6 | ||
| GND pin current | 55 | 100 | μA | ILOAD = 1mA | 6 | ||
| GND pin current | 230 | 400 | μA | ILOAD = 10mA | 6 | ||
| GND pin current | 1 | 2 | mA | ILOAD = 50mA | 6 | ||
| GND pin current | 2.2 | 4 | mA | ILOAD = 100mA | 6 | ||
| Ripple rejection | 55 | 65 | dB | VIN, VOUT = 1.5V (Avg), VRIPPLE = 0.5VP-P, fRIPPLE = 120Hz, ILOAD = 50mA | 6 | ||
| Current limit | 110 | VIN = VOUT(NOMINAL) + 1V or 2.3V, ΔVOUT = -5% | 6 | ||||
| Reverse input leakage current | 1 | mA | VIN = -12V, VOUT = 0V | 6 | |||
| Reverse output current (LKP2872ST-33) | 10 | 20 | μA | VOUT = 3.3V, VIN < 3.3V | 6 | ||
| Junction-to-case thermal resistance (top) | RθJc | 50.18 | °C/W | 5 | |||
| Junction-to-case thermal resistance (bottom) | RθJc | 178.92 | °C/W | 5 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
LKP2872ST-33 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.4 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
lkp2872st-33-etched.step/lkp2872st-33-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lkp2872st-33.step/lkp2872st-33.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: LKWIC datasheet (11 pp, sha256
36bd3ee8b7e961db, retrieved 2026-11-12, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).