Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LKP2872ST-33

LKWIC · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5

LKP2872ST-33 from LKWIC, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 IN power_in Input supply (1.8V to 15V recommended operating range); a 1µF to 10µF ceramic capacitor to GND is recommended.
2 GND power_in Ground.
3 SHDN# input Output shutdown pin that must be connected to IN, and the device will not operate if it is left floating.
4 BYP passive On fixed-output versions, a 0.01µF ceramic capacitor between this pin and OUT reduces output noise to 20µVRMS (10Hz to 100kHz), and the pin must be left floating if unused.
5 OUT power_out Regulated output; connect a ceramic or tantalum capacitor of at least 1µF to GND.

Key specifications

Parameter Value
Manufacturer LKWIC
Package SOT-23-5
Category Power Management (PMIC)
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage (IN/SHDN# pin) VIN -18 18 V 5
BYP pin voltage -0.6 0.6 V 5
ADJ pin voltage -7 7 V 5
Output voltage (OUT pin) VOUT -18 18 V 5
Storage temperature TSTG -65 150 ℃ 5
Junction temperature Tj 150 ℃ 5
Input voltage (IN pin) VIN 1.8 15 V 5
Operating temperature TA -40 125 ℃ 5
Minimum input voltage 1.8 2.3 V ILOAD = 100mA 6
Output voltage (LKP2872ST-33) 3.19 3.3 3.4 V 4.3V < VIN < 18V, 1mA < ILOAD < 100mA 6
Line regulation (LKP2872ST-33) 1 10 mV ILOAD = 1mA 6
Load regulation (LKP2872ST-33) 20 100 mV VIN = 4.3V, ΔILOAD = 1mA to 100mA 6
Dropout voltage 0.1 0.19 V ILOAD = 1mA 6
Dropout voltage 0.17 0.29 V ILOAD = 10mA 6
Dropout voltage 0.24 0.38 V ILOAD = 50mA 6
Dropout voltage 0.3 0.45 V ILOAD = 100mA 6
GND pin current 20 45 μA ILOAD = 0mA 6
GND pin current 55 100 μA ILOAD = 1mA 6
GND pin current 230 400 μA ILOAD = 10mA 6
GND pin current 1 2 mA ILOAD = 50mA 6
GND pin current 2.2 4 mA ILOAD = 100mA 6
Ripple rejection 55 65 dB VIN, VOUT = 1.5V (Avg), VRIPPLE = 0.5VP-P, fRIPPLE = 120Hz, ILOAD = 50mA 6
Current limit 110 VIN = VOUT(NOMINAL) + 1V or 2.3V, ΔVOUT = -5% 6
Reverse input leakage current 1 mA VIN = -12V, VOUT = 0V 6
Reverse output current (LKP2872ST-33) 10 20 μA VOUT = 3.3V, VIN < 3.3V 6
Junction-to-case thermal resistance (top) RθJc 50.18 °C/W 5
Junction-to-case thermal resistance (bottom) RθJc 178.92 °C/W 5

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: LKP2872ST-33
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.4 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: lkp2872st-33-etched.step / lkp2872st-33-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lkp2872st-33.step / lkp2872st-33.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: LKWIC datasheet (11 pp, sha256 36bd3ee8b7e961db, retrieved 2026-11-12, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF