main
History Download
Ray lki8010ss: laser-etched CAD + chip hero (factory 2.0.0 backfill) 3ddd4b0

LKI8010SS

LKWIC · LVDS ICs · TSSOP-16

LKI8010SS from LKWIC, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN1- input Channel 1 LVDS inverting differential input. Pair with IN1+ across a 100 Ohm external termination resistor.
2 IN1+ input Channel 1 LVDS non-inverting differential input. Pair with IN1- across a 100 Ohm external termination resistor.
3 IN2+ input Channel 2 LVDS non-inverting differential input. Pair with IN2- across a 100 Ohm external termination resistor.
4 IN2- input Channel 2 LVDS inverting differential input. Pair with IN2+ across a 100 Ohm external termination resistor.
5 IN3- input Channel 3 LVDS inverting differential input. Pair with IN3+ across a 100 Ohm external termination resistor.
6 IN3+ input Channel 3 LVDS non-inverting differential input. Pair with IN3- across a 100 Ohm external termination resistor.
7 IN4+ input Channel 4 LVDS non-inverting differential input. Pair with IN4- across a 100 Ohm external termination resistor.
8 IN4- input Channel 4 LVDS inverting differential input. Pair with IN4+ across a 100 Ohm external termination resistor.
9 EN# input Active-low output enable. When EN#=L and EN=H, all four receiver outputs are enabled. Any other combination places outputs in high-Z. VIL <= 0.8 V, VIH >= 2.0 V.
10 OUT4 output Channel 4 LVTTL/LVCMOS receiver output. VOH >= 2.7 V at IOH=-0.4 mA; VOL <= 0.25 V at IOL=2.0 mA. High-Z when disabled.
11 OUT3 output Channel 3 LVTTL/LVCMOS receiver output. VOH >= 2.7 V at IOH=-0.4 mA; VOL <= 0.25 V at IOL=2.0 mA. High-Z when disabled.
12 GND power_in Ground / 0 V reference for the device.
13 VCC power_in Positive supply, 3.0 V to 3.6 V (3.3 V nominal). Bypass with 10 uF and 0.01 uF capacitors in parallel, small cap close to the pin. Typical ICC = 9 mA enabled, 0.07 mA disabled.
14 OUT2 output Channel 2 LVTTL/LVCMOS receiver output. VOH >= 2.7 V at IOH=-0.4 mA; VOL <= 0.25 V at IOL=2.0 mA. High-Z when disabled.
15 OUT1 output Channel 1 LVTTL/LVCMOS receiver output. VOH >= 2.7 V at IOH=-0.4 mA; VOL <= 0.25 V at IOL=2.0 mA. High-Z when disabled.
16 EN input Active-high output enable. When EN=H and EN#=L (or open), all four receiver outputs are enabled. Any other combination places outputs in high-Z. VIL <= 0.8 V, VIH >= 2.0 V.

Key specifications

Parameter Value
Manufacturer LKWIC
Package TSSOP-16
Category Interface
Pins 16

Ordering variants

Same part, different packaging or reel option.

  • LKI8010SS

CAD (KiCad official)

  • Symbol: LKI8010SS
  • Footprint: Package_SO:TSSOP-16_4.4x5mm_P0.65mm
  • 3D model: TSSOP-16 (KiCad packages3D, STEP)
  • 3D model files: lki8010ss-etched.step / lki8010ss-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lki8010ss.step / lki8010ss.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: LKWIC datasheet (10 pp, sha256 54a9693139c47214, retrieved 2026-08-17, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF