main
History Download
Ray Initial commit: component/lis2de12tr 3bf9a0b

LIS2DE12TR

STMicroelectronics · Accelerometers · LGA-12(2x2)

LIS2DE12TR from STMicroelectronics, in a LGA-12(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SCL/SPC input I2C serial clock (SCL) input in I2C mode or SPI serial port clock (SPC) input in SPI mode.
2 CS input SPI chip select enable and I2C/SPI mode selection input (high for I2C enabled, low for SPI enabled).
3 SDO/SA0 bidirectional SPI serial data output (SDO) or I2C slave address least significant bit (SA0) with internal pull-up of 20.4 to 54.4 kΩ depending on Vdd_IO supply voltage.
4 SDA/SDI/SDO bidirectional I2C serial data (SDA) bidirectional, SPI serial data input (SDI), or 3-wire SPI serial data output (SDO) depending on interface mode configuration.
5 Res passive Reserved pin that must be connected to ground (GND).
6 GND power_in Ground reference (0 V) connection.
7 GND power_in Ground reference (0 V) connection.
8 GND power_in Ground reference (0 V) connection.
9 Vdd power_in Analog and core power supply with 1.71 V to 3.6 V operating range, requires 100 nF ceramic and 10 μF aluminum decoupling capacitors placed near this pin.
10 Vdd_IO power_in I/O power supply with 1.71 V to Vdd+0.1 V operating range that can be maintained independently of Vdd without blocking communication buses.
11 INT2 output Programmable interrupt output pin 2 for motion detection and free-fall events, active high by default (polarity configurable via CTRL_REG6 bit 7).
12 INT1 output Programmable interrupt output pin 1 for motion detection and free-fall events, active high by default (polarity configurable via CTRL_REG3 bit 7).

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package LGA-12(2x2)
Category Sensors
Pins 12

CAD (KiCad official)

  • Symbol: LIS2DE12TR
  • Footprint: Package_LGA:LGA-12_2x2mm_P0.5mm
  • 3D model: LGA-12(2x2) (KiCad packages3D, STEP)
  • 3D model files: lis2de12tr-etched.step / lis2de12tr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lis2de12tr.step / lis2de12tr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (51 pp, sha256 f92fb27b58bec57d, retrieved 2026-09-18, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF