← Commit history

Initial commit: component/lis2de12tr

Ray ·3bf9a0b7af ·
2 files changed +215
README.mdadded+48
@@ -0,0 +1,48 @@+# LIS2DE12TR++**STMicroelectronics** · Accelerometers · LGA-12(2x2)++LIS2DE12TR from STMicroelectronics, in a LGA-12(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | SCL/SPC | input | I2C serial clock (SCL) input in I2C mode or SPI serial port clock (SPC) input in SPI mode. |+| 2 | CS | input | SPI chip select enable and I2C/SPI mode selection input (high for I2C enabled, low for SPI enabled). |+| 3 | SDO/SA0 | bidirectional | SPI serial data output (SDO) or I2C slave address least significant bit (SA0) with internal pull-up of 20.4 to 54.4 kΩ depending on Vdd_IO supply voltage. |+| 4 | SDA/SDI/SDO | bidirectional | I2C serial data (SDA) bidirectional, SPI serial data input (SDI), or 3-wire SPI serial data output (SDO) depending on interface mode configuration. |+| 5 | Res | passive | Reserved pin that must be connected to ground (GND). |+| 6 | GND | power_in | Ground reference (0 V) connection. |+| 7 | GND | power_in | Ground reference (0 V) connection. |+| 8 | GND | power_in | Ground reference (0 V) connection. |+| 9 | Vdd | power_in | Analog and core power supply with 1.71 V to 3.6 V operating range, requires 100 nF ceramic and 10 μF aluminum decoupling capacitors placed near this pin. |+| 10 | Vdd_IO | power_in | I/O power supply with 1.71 V to Vdd+0.1 V operating range that can be maintained independently of Vdd without blocking communication buses. |+| 11 | INT2 | output | Programmable interrupt output pin 2 for motion detection and free-fall events, active high by default (polarity configurable via CTRL_REG6 bit 7). |+| 12 | INT1 | output | Programmable interrupt output pin 1 for motion detection and free-fall events, active high by default (polarity configurable via CTRL_REG3 bit 7). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | LGA-12(2x2) |+| Category | Sensors |+| Pins | 12 |++## CAD (KiCad official)++- Symbol: `LIS2DE12TR`+- Footprint: `Package_LGA:LGA-12_2x2mm_P0.5mm`+- 3D model: LGA-12(2x2) (KiCad packages3D, STEP)+- 3D model files: `lis2de12tr-etched.step` / `lis2de12tr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lis2de12tr.step` / `lis2de12tr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588900481972649984) (51 pp, sha256 `f92fb27b58bec57d`, retrieved 2026-09-18, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lis2de12tr-datasheet.pdf)
page.jsonadded+167
@@ -0,0 +1,167 @@+{+  "slug": "lis2de12tr",+  "version": "0.1.0",+  "type": "component",+  "description": "STMicroelectronics Accelerometers, LGA-12(2x2). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "sensors",+    "lis2de12tr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "lis2de12tr.kicad_sym",+    "lis2de12tr.kicad_mod",+    "lis2de12tr.glb",+    "lis2de12tr.step",+    "lis2de12tr.lbr",+    "docs/hero.png",+    "docs/lis2de12tr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "LIS2DE12TR",+    "manufacturer": "STMicroelectronics",+    "package": "LGA-12(2x2)",+    "pin_count": 12,+    "category": "Sensors",+    "subcategory": "Accelerometers",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588900481972649984",+    "parts": {+      "symbol": "lis2de12tr.kicad_sym",+      "footprint": "lis2de12tr.kicad_mod",+      "model_3d": "lis2de12tr-etched.glb",+      "model_3d_plain": "lis2de12tr.glb",+      "model_3d_step": "lis2de12tr-etched.step",+      "model_3d_step_plain": "lis2de12tr.step",+      "lbr": "lis2de12tr.lbr"+    },+    "distributor_links": {+      "lcsc": "C155639"+    },+    "pins": [+      {+        "number": "1",+        "name": "SCL/SPC",+        "type": "input",+        "description": "I2C serial clock (SCL) input in I2C mode or SPI serial port clock (SPC) input in SPI mode."+      },+      {+        "number": "2",+        "name": "CS",+        "type": "input",+        "description": "SPI chip select enable and I2C/SPI mode selection input (high for I2C enabled, low for SPI enabled)."+      },+      {+        "number": "3",+        "name": "SDO/SA0",+        "type": "bidirectional",+        "description": "SPI serial data output (SDO) or I2C slave address least significant bit (SA0) with internal pull-up of 20.4 to 54.4 kΩ depending on Vdd_IO supply voltage."+      },+      {+        "number": "4",+        "name": "SDA/SDI/SDO",+        "type": "bidirectional",+        "description": "I2C serial data (SDA) bidirectional, SPI serial data input (SDI), or 3-wire SPI serial data output (SDO) depending on interface mode configuration."+      },+      {+        "number": "5",+        "name": "Res",+        "type": "passive",+        "description": "Reserved pin that must be connected to ground (GND)."+      },+      {+        "number": "6",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference (0 V) connection."+      },+      {+        "number": "7",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference (0 V) connection."+      },+      {+        "number": "8",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference (0 V) connection."+      },+      {+        "number": "9",+        "name": "Vdd",+        "type": "power_in",+        "description": "Analog and core power supply with 1.71 V to 3.6 V operating range, requires 100 nF ceramic and 10 μF aluminum decoupling capacitors placed near this pin."+      },+      {+        "number": "10",+        "name": "Vdd_IO",+        "type": "power_in",+        "description": "I/O power supply with 1.71 V to Vdd+0.1 V operating range that can be maintained independently of Vdd without blocking communication buses."+      },+      {+        "number": "11",+        "name": "INT2",+        "type": "output",+        "description": "Programmable interrupt output pin 2 for motion detection and free-fall events, active high by default (polarity configurable via CTRL_REG6 bit 7)."+      },+      {+        "number": "12",+        "name": "INT1",+        "type": "output",+        "description": "Programmable interrupt output pin 1 for motion detection and free-fall events, active high by default (polarity configurable via CTRL_REG3 bit 7)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: Pin 3 (SDO/SA0) operates in dual mode: SPI serial data output when CS is low, or I2C slave address c; Pin 4 (SDA/SDI/SDO) supports three operational modes: I2C bidirectional mode when CS is high, SPI 4-"+        ],+        "pages_sent": 51,+        "cost_usd": 0.4164,+        "at": "2026-09-18T07:27:21"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588900481972649984",+        "pages": 51,+        "sha256": "f92fb27b58bec57d",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 12,+        "described": 12,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file