main
Ray Publish 0.1.0 4ac2a72
{
  "slug": "lgs53605a",
  "version": "0.1.0",
  "type": "component",
  "description": "Legend-Si DC-DC Converters, QFN-24(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power supply chip",
    "lgs53605a",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lgs53605a.kicad_sym",
    "lgs53605a.kicad_mod",
    "lgs53605a.glb",
    "lgs53605a.step",
    "lgs53605a.lbr",
    "docs/hero.png",
    "docs/lgs53605a-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lgs53605a-hero.glb",
    "lgs53605a-hero.overlay.json",
    "lgs53605a-etched.glb"
  ],
  "component": {
    "mpn": "LGS53605A",
    "manufacturer": "Legend-Si",
    "package": "QFN-24(4x4)",
    "pin_count": 25,
    "category": "Power Supply Chip",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/5fa30ab53a8b023f4e1ca2a571f59cf3.pdf",
    "parts": {
      "symbol": "lgs53605a.kicad_sym",
      "footprint": "lgs53605a.kicad_mod",
      "model_3d": "lgs53605a-hero.glb",
      "model_3d_plain": "lgs53605a-etched.glb",
      "model_3d_step": "lgs53605a-etched.step",
      "model_3d_step_plain": "lgs53605a.step",
      "lbr": "lgs53605a.lbr"
    },
    "distributor_links": {
      "lcsc": "C5369199"
    },
    "distributor_check": {
      "checked_at": "2026-10-29T10:54:24Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "RT",
        "type": "input",
        "description": "Oscillator frequency programming pin: connect an external resistor between 200k and 80k from RT to SGND to set 800kHz to 2MHz, keeping the set frequency within ±30% of an external clock for lock."
      },
      {
        "number": "2",
        "name": "PHMODE",
        "type": "input",
        "description": "Phase selector input: tie to INTVCC for 2-phase operation, to SGND for 3-phase operation, and to INTVCC/2 for 4-phase operation."
      },
      {
        "number": "3",
        "name": "MODE",
        "type": "input",
        "description": "Operation mode select: tie to INTVCC to force continuous synchronous operation at all loads, or to SGND to enable discontinuous mode at light loads; do not float this pin."
      },
      {
        "number": "4",
        "name": "FB",
        "type": "input",
        "description": "Feedback input to the error amplifier, which compares the feedback voltage to the internal 0.6V reference, normally fed from a resistive divider from the output voltage."
      },
      {
        "number": "5",
        "name": "TRACK/SS",
        "type": "input",
        "description": "Output tracking and soft-start pin: a voltage below 0.6V makes FB track this pin, and the internal 2.5µA pull-up from INTVCC with an external capacitor provides soft-start."
      },
      {
        "number": "6",
        "name": "ITH",
        "type": "passive",
        "description": "Error amplifier output and switching regulator compensation point; the current comparator trip threshold is linearly proportional to this voltage."
      },
      {
        "number": "7",
        "name": "EN",
        "type": "input",
        "description": "Regulator enable input, set high to enable the output; VIN undervoltage protection can be set with an external resistor divider."
      },
      {
        "number": "8",
        "name": "PG",
        "type": "output",
        "description": "Open-drain power-good output that is pulled to ground when the FB voltage is not within ±10% of the internal 0.6V reference."
      },
      {
        "number": "9",
        "name": "VON",
        "type": "input",
        "description": "On-time voltage input and trip point for the on-time comparator; tying it to VOUT makes on-time proportional to VOUT and keeps switching frequency constant."
      },
      {
        "number": "10",
        "name": "PGND",
        "type": "power_in",
        "description": "Power ground and return path of the internal power MOSFETs; connect to the negative terminals of the input and output capacitors."
      },
      {
        "number": "11",
        "name": "SW",
        "type": "output",
        "description": "Switch node connection to the external inductor; voltage swings from a diode drop below ground up to PVIN."
      },
      {
        "number": "12",
        "name": "SW",
        "type": "output",
        "description": "Switch node connection to the external inductor; voltage swings from a diode drop below ground up to PVIN."
      },
      {
        "number": "13",
        "name": "SW",
        "type": "output",
        "description": "Switch node connection to the external inductor; voltage swings from a diode drop below ground up to PVIN."
      },
      {
        "number": "14",
        "name": "SW",
        "type": "output",
        "description": "Switch node connection to the external inductor; voltage swings from a diode drop below ground up to PVIN."
      },
      {
        "number": "15",
        "name": "SW",
        "type": "output",
        "description": "Switch node connection to the external inductor; voltage swings from a diode drop below ground up to PVIN."
      },
      {
        "number": "16",
        "name": "SW",
        "type": "output",
        "description": "Switch node connection to the external inductor; voltage swings from a diode drop below ground up to PVIN."
      },
      {
        "number": "17",
        "name": "PVIN",
        "type": "power_in",
        "description": "Regulator power input; use a ceramic capacitor of 22µF or larger as close as possible between PVIN and PGND."
      },
      {
        "number": "18",
        "name": "PVIN",
        "type": "power_in",
        "description": "Regulator power input; use a ceramic capacitor of 22µF or larger as close as possible between PVIN and PGND."
      },
      {
        "number": "19",
        "name": "SVIN",
        "type": "power_in",
        "description": "Signal VIN, the filtered input to the on-chip 3.3V regulator; connect a 1Ω to 10Ω resistor between SVIN and PVIN and bypass to GND with a 0.1µF capacitor."
      },
      {
        "number": "20",
        "name": "BST",
        "type": "power_out",
        "description": "Bootstrap drive supply; 100nF ceramic capacitors must be connected between BST and SW to bias the internal high-side gate driver."
      },
      {
        "number": "21",
        "name": "INTVCC",
        "type": "power_out",
        "description": "Supply for the internal control circuit; a 1µF to 4.7µF ceramic decoupling capacitor must be connected between INTVCC and PGND, as close to the pin as possible."
      },
      {
        "number": "22",
        "name": "SGND",
        "type": "power_in",
        "description": "Signal ground connection."
      },
      {
        "number": "23",
        "name": "CLKOUT",
        "type": "output",
        "description": "Output clock for multiphase operation; its phase relative to CLKIN is set by PHMODE, and its peak-to-peak amplitude is INTVCC to GND."
      },
      {
        "number": "24",
        "name": "CLKIN",
        "type": "input",
        "description": "External synchronization input to the phase detector, internally terminated to SGND with 20k; the PLL forces the top NMOS turn-on to synchronize with the CLKIN rising edge."
      },
      {
        "number": "25",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The exposed pad (EP) is listed as PGND together with pin 10 in Table 2.2 but has no numbered positio; Table 2.2 lists pins 11~16 as one SW group; each pin is split out individually with the same name an; Table 2.2 lists pins 17,18 as one PVIN group; split into two entries with the same description.",
          "exposed pad 25 added from the footprint"
        ],
        "pages_sent": 5,
        "cost_usd": 0.0486,
        "at": "2026-10-29T10:54:12"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/5fa30ab53a8b023f4e1ca2a571f59cf3.pdf",
        "pages": 25,
        "sha256": "0f38c7e9b32cb0d3",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 25,
        "described": 25,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lgs53605a.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.0,
          4.0,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "096fc110543e6d324c5120c2d38e3dca87a389da9b6fac234f1fe40856295ef4",
        "checked": "2026-10-29",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lgs53605a-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.0,
          4.0,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "520a31a53f1616d19663a974e49412aedb16e5ddf7b5f6567c92571a371cb67a",
        "checked": "2026-10-29",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}