Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LGS53605A

Legend-Si · DC-DC Converters · QFN-24(4x4)

LGS53605A from Legend-Si, in a QFN-24(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RT input Oscillator frequency programming pin: connect an external resistor between 200k and 80k from RT to SGND to set 800kHz to 2MHz, keeping the set frequency within ±30% of an external clock for lock.
2 PHMODE input Phase selector input: tie to INTVCC for 2-phase operation, to SGND for 3-phase operation, and to INTVCC/2 for 4-phase operation.
3 MODE input Operation mode select: tie to INTVCC to force continuous synchronous operation at all loads, or to SGND to enable discontinuous mode at light loads; do not float this pin.
4 FB input Feedback input to the error amplifier, which compares the feedback voltage to the internal 0.6V reference, normally fed from a resistive divider from the output voltage.
5 TRACK/SS input Output tracking and soft-start pin: a voltage below 0.6V makes FB track this pin, and the internal 2.5µA pull-up from INTVCC with an external capacitor provides soft-start.
6 ITH passive Error amplifier output and switching regulator compensation point; the current comparator trip threshold is linearly proportional to this voltage.
7 EN input Regulator enable input, set high to enable the output; VIN undervoltage protection can be set with an external resistor divider.
8 PG output Open-drain power-good output that is pulled to ground when the FB voltage is not within ±10% of the internal 0.6V reference.
9 VON input On-time voltage input and trip point for the on-time comparator; tying it to VOUT makes on-time proportional to VOUT and keeps switching frequency constant.
10 PGND power_in Power ground and return path of the internal power MOSFETs; connect to the negative terminals of the input and output capacitors.
11 SW output Switch node connection to the external inductor; voltage swings from a diode drop below ground up to PVIN.
12 SW output Switch node connection to the external inductor; voltage swings from a diode drop below ground up to PVIN.
13 SW output Switch node connection to the external inductor; voltage swings from a diode drop below ground up to PVIN.
14 SW output Switch node connection to the external inductor; voltage swings from a diode drop below ground up to PVIN.
15 SW output Switch node connection to the external inductor; voltage swings from a diode drop below ground up to PVIN.
16 SW output Switch node connection to the external inductor; voltage swings from a diode drop below ground up to PVIN.
17 PVIN power_in Regulator power input; use a ceramic capacitor of 22µF or larger as close as possible between PVIN and PGND.
18 PVIN power_in Regulator power input; use a ceramic capacitor of 22µF or larger as close as possible between PVIN and PGND.
19 SVIN power_in Signal VIN, the filtered input to the on-chip 3.3V regulator; connect a 1Ω to 10Ω resistor between SVIN and PVIN and bypass to GND with a 0.1µF capacitor.
20 BST power_out Bootstrap drive supply; 100nF ceramic capacitors must be connected between BST and SW to bias the internal high-side gate driver.
21 INTVCC power_out Supply for the internal control circuit; a 1µF to 4.7µF ceramic decoupling capacitor must be connected between INTVCC and PGND, as close to the pin as possible.
22 SGND power_in Signal ground connection.
23 CLKOUT output Output clock for multiphase operation; its phase relative to CLKIN is set by PHMODE, and its peak-to-peak amplitude is INTVCC to GND.
24 CLKIN input External synchronization input to the phase detector, internally terminated to SGND with 20k; the PLL forces the top NMOS turn-on to synchronize with the CLKIN rising edge.
25 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Legend-Si
Package QFN-24(4x4)
Category Power Supply Chip
Pins 25

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
SVIN Input Voltage Range SVIN 4 20 V 6
PVIN Input Voltage Range PVIN 0.9 20 V 6
No-load input current IQ 600 uA Mode = 0, RT = 130k 6
Shutdown current Isd 11 uA VIN = 12V, EN = 0 6
Feedback Reference Voltage VFB 0.594 0.6 0.606 V 6
Feedback Voltage Line Regulation ΔVFB(LINE) 0.001 0.03 % VIN = 4V to 20V 6
Feedback Voltage Load Regulation ΔVFB(LOAD) 0.1 0.3 % 6
Feedback Pin Input Current IFB 10 100 nA 6
Error Amplifier Transconductance gm(EA) 1.253 1.67 mS 6
Minimum On-Time tON(MIN) 50 ns 6
Minimum Off-Time tOFF(MIN) 130 ns 6
Positive Inductor Valley Current Limit ILIM 6 A 6
Negative Inductor Valley Current Limit ILIM -6 A 6
Top Power NMOS On-Resistance RTOP 85 150 mΩ INTVCC = 3.3V 6
Bottom Power NMOS On-Resistance RBOTTOM 42 60 mΩ INTVCC = 3.3V 6
INTVCC Undervoltage Lockout Threshold (rising) VUVLO 2.6 V INTVCC Rising 6
INTVCC Undervoltage Lockout Threshold (falling) VUVLO 2.8 V INTVCC Falling 6
EN Threshold 2 VEN 1.1 V IQ≥1mA, EN Rising 6
EN Threshold 1 VEN 0.5 V IQ≥100uA, EN Rising 6
INTVCC Internal VCC Voltage INTVCC 3.3 V 4V < VIN < 20V 6
INTVCC Load Regulation ΔINTVCC 0.3 % ILOAD = 0mA to 20mA 6
Output Overvoltage Threshold OV 110 % VFB Rising 6
Output Undervoltage Threshold UV 91 % VFB Falling 6
PGOOD Hysteresis ΔVFB(HYS) 1 % VFB Returning 6
PGOOD Pull-Down Resistance RPG 38 Ω 6
PGOOD Leakage IPG 2 uA 0.54V<VFB<0.66V 7
TRACK Pull-Up Current ITRACK/SS 2.5 4 uA 7
Oscillator Frequency fs 0.8 1 2 MHz RT = 162kΩ 7
CLKIN Threshold VIL CLKIN VIL 0.3 V 7
CLKIN Threshold VIH CLKIN VIH 1 V 7
VIN Overvoltage Lockout Threshold (rising) VVIN_OV 23 V VIN Rising 7
VIN Overvoltage Lockout Threshold (falling) VVIN_OV 21 V VIN Falling 7
Pin to GND Voltage (PVIN, SVIN, SW, EN) -0.3 22.5 V 3
Pin to GND Voltage (SW Transient) -2 24.5 V SW transient 3
Pin to GND Voltage (BST) -0.3 V upper limit printed as PVIN+INTVCC 3
Pin to GND Voltage (VON) -0.3 V upper limit printed as SVIN 3
Pin to GND Voltage (INTVCC) -0.3 3.6 V 3
Pin to GND Voltage (ITH, RT, PG, CLKIN, CLKOUT) -0.3 V upper limit printed as INTVCC 3
Pin to GND Voltage (PHMODE, MODE, TRACK/SS, FB) -0.3 V upper limit printed as INTVCC 3
Operating junction temperature TJ -40 125 ℃ 3
Storage temperature -65 150 ℃ 3
ESD value (HBM) -2 2 KV HBM 3
ESD value (CDM) -1 1 KV CDM 3
Thermal resistance, junction to ambient θJA 37 ℃/W TJMAX=125℃, QFN4x4-24 package 3

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper connects to the PGND pin at the negative terminal of the output capacitor COUT.  Cover all unused areas on all layers with copper to reduce the temperature rise of the power element. These 21

CAD (KiCad official)

  • Symbol: LGS53605A
  • Footprint: Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm
  • 3D model: QFN-24(4x4) (KiCad packages3D, STEP)
  • 3D model files: lgs53605a-etched.step / lgs53605a-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lgs53605a.step / lgs53605a.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Legend-Si datasheet (25 pp, sha256 0f38c7e9b32cb0d3, retrieved 2026-10-29, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF