main
Ray
Publish 0.1.0
4ac2a72
LGS53605A
Legend-Si · DC-DC Converters · QFN-24(4x4)
LGS53605A from Legend-Si, in a QFN-24(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RT | input | Oscillator frequency programming pin: connect an external resistor between 200k and 80k from RT to SGND to set 800kHz to 2MHz, keeping the set frequency within ±30% of an external clock for lock. |
| 2 | PHMODE | input | Phase selector input: tie to INTVCC for 2-phase operation, to SGND for 3-phase operation, and to INTVCC/2 for 4-phase operation. |
| 3 | MODE | input | Operation mode select: tie to INTVCC to force continuous synchronous operation at all loads, or to SGND to enable discontinuous mode at light loads; do not float this pin. |
| 4 | FB | input | Feedback input to the error amplifier, which compares the feedback voltage to the internal 0.6V reference, normally fed from a resistive divider from the output voltage. |
| 5 | TRACK/SS | input | Output tracking and soft-start pin: a voltage below 0.6V makes FB track this pin, and the internal 2.5µA pull-up from INTVCC with an external capacitor provides soft-start. |
| 6 | ITH | passive | Error amplifier output and switching regulator compensation point; the current comparator trip threshold is linearly proportional to this voltage. |
| 7 | EN | input | Regulator enable input, set high to enable the output; VIN undervoltage protection can be set with an external resistor divider. |
| 8 | PG | output | Open-drain power-good output that is pulled to ground when the FB voltage is not within ±10% of the internal 0.6V reference. |
| 9 | VON | input | On-time voltage input and trip point for the on-time comparator; tying it to VOUT makes on-time proportional to VOUT and keeps switching frequency constant. |
| 10 | PGND | power_in | Power ground and return path of the internal power MOSFETs; connect to the negative terminals of the input and output capacitors. |
| 11 | SW | output | Switch node connection to the external inductor; voltage swings from a diode drop below ground up to PVIN. |
| 12 | SW | output | Switch node connection to the external inductor; voltage swings from a diode drop below ground up to PVIN. |
| 13 | SW | output | Switch node connection to the external inductor; voltage swings from a diode drop below ground up to PVIN. |
| 14 | SW | output | Switch node connection to the external inductor; voltage swings from a diode drop below ground up to PVIN. |
| 15 | SW | output | Switch node connection to the external inductor; voltage swings from a diode drop below ground up to PVIN. |
| 16 | SW | output | Switch node connection to the external inductor; voltage swings from a diode drop below ground up to PVIN. |
| 17 | PVIN | power_in | Regulator power input; use a ceramic capacitor of 22µF or larger as close as possible between PVIN and PGND. |
| 18 | PVIN | power_in | Regulator power input; use a ceramic capacitor of 22µF or larger as close as possible between PVIN and PGND. |
| 19 | SVIN | power_in | Signal VIN, the filtered input to the on-chip 3.3V regulator; connect a 1Ω to 10Ω resistor between SVIN and PVIN and bypass to GND with a 0.1µF capacitor. |
| 20 | BST | power_out | Bootstrap drive supply; 100nF ceramic capacitors must be connected between BST and SW to bias the internal high-side gate driver. |
| 21 | INTVCC | power_out | Supply for the internal control circuit; a 1µF to 4.7µF ceramic decoupling capacitor must be connected between INTVCC and PGND, as close to the pin as possible. |
| 22 | SGND | power_in | Signal ground connection. |
| 23 | CLKOUT | output | Output clock for multiphase operation; its phase relative to CLKIN is set by PHMODE, and its peak-to-peak amplitude is INTVCC to GND. |
| 24 | CLKIN | input | External synchronization input to the phase detector, internally terminated to SGND with 20k; the PLL forces the top NMOS turn-on to synchronize with the CLKIN rising edge. |
| 25 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Legend-Si |
| Package | QFN-24(4x4) |
| Category | Power Supply Chip |
| Pins | 25 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| SVIN Input Voltage Range | SVIN | 4 | 20 | V | 6 | ||
| PVIN Input Voltage Range | PVIN | 0.9 | 20 | V | 6 | ||
| No-load input current | IQ | 600 | uA | Mode = 0, RT = 130k | 6 | ||
| Shutdown current | Isd | 11 | uA | VIN = 12V, EN = 0 | 6 | ||
| Feedback Reference Voltage | VFB | 0.594 | 0.6 | 0.606 | V | 6 | |
| Feedback Voltage Line Regulation | ΔVFB(LINE) | 0.001 | 0.03 | % | VIN = 4V to 20V | 6 | |
| Feedback Voltage Load Regulation | ΔVFB(LOAD) | 0.1 | 0.3 | % | 6 | ||
| Feedback Pin Input Current | IFB | 10 | 100 | nA | 6 | ||
| Error Amplifier Transconductance | gm(EA) | 1.253 | 1.67 | mS | 6 | ||
| Minimum On-Time | tON(MIN) | 50 | ns | 6 | |||
| Minimum Off-Time | tOFF(MIN) | 130 | ns | 6 | |||
| Positive Inductor Valley Current Limit | ILIM | 6 | A | 6 | |||
| Negative Inductor Valley Current Limit | ILIM | -6 | A | 6 | |||
| Top Power NMOS On-Resistance | RTOP | 85 | 150 | mΩ | INTVCC = 3.3V | 6 | |
| Bottom Power NMOS On-Resistance | RBOTTOM | 42 | 60 | mΩ | INTVCC = 3.3V | 6 | |
| INTVCC Undervoltage Lockout Threshold (rising) | VUVLO | 2.6 | V | INTVCC Rising | 6 | ||
| INTVCC Undervoltage Lockout Threshold (falling) | VUVLO | 2.8 | V | INTVCC Falling | 6 | ||
| EN Threshold 2 | VEN | 1.1 | V | IQ≥1mA, EN Rising | 6 | ||
| EN Threshold 1 | VEN | 0.5 | V | IQ≥100uA, EN Rising | 6 | ||
| INTVCC Internal VCC Voltage | INTVCC | 3.3 | V | 4V < VIN < 20V | 6 | ||
| INTVCC Load Regulation | ΔINTVCC | 0.3 | % | ILOAD = 0mA to 20mA | 6 | ||
| Output Overvoltage Threshold | OV | 110 | % | VFB Rising | 6 | ||
| Output Undervoltage Threshold | UV | 91 | % | VFB Falling | 6 | ||
| PGOOD Hysteresis | ΔVFB(HYS) | 1 | % | VFB Returning | 6 | ||
| PGOOD Pull-Down Resistance | RPG | 38 | Ω | 6 | |||
| PGOOD Leakage | IPG | 2 | uA | 0.54V<VFB<0.66V | 7 | ||
| TRACK Pull-Up Current | ITRACK/SS | 2.5 | 4 | uA | 7 | ||
| Oscillator Frequency | fs | 0.8 | 1 | 2 | MHz | RT = 162kΩ | 7 |
| CLKIN Threshold VIL | CLKIN VIL | 0.3 | V | 7 | |||
| CLKIN Threshold VIH | CLKIN VIH | 1 | V | 7 | |||
| VIN Overvoltage Lockout Threshold (rising) | VVIN_OV | 23 | V | VIN Rising | 7 | ||
| VIN Overvoltage Lockout Threshold (falling) | VVIN_OV | 21 | V | VIN Falling | 7 | ||
| Pin to GND Voltage (PVIN, SVIN, SW, EN) | -0.3 | 22.5 | V | 3 | |||
| Pin to GND Voltage (SW Transient) | -2 | 24.5 | V | SW transient | 3 | ||
| Pin to GND Voltage (BST) | -0.3 | V | upper limit printed as PVIN+INTVCC | 3 | |||
| Pin to GND Voltage (VON) | -0.3 | V | upper limit printed as SVIN | 3 | |||
| Pin to GND Voltage (INTVCC) | -0.3 | 3.6 | V | 3 | |||
| Pin to GND Voltage (ITH, RT, PG, CLKIN, CLKOUT) | -0.3 | V | upper limit printed as INTVCC | 3 | |||
| Pin to GND Voltage (PHMODE, MODE, TRACK/SS, FB) | -0.3 | V | upper limit printed as INTVCC | 3 | |||
| Operating junction temperature | TJ | -40 | 125 | ℃ | 3 | ||
| Storage temperature | -65 | 150 | ℃ | 3 | |||
| ESD value (HBM) | -2 | 2 | KV | HBM | 3 | ||
| ESD value (CDM) | -1 | 1 | KV | CDM | 3 | ||
| Thermal resistance, junction to ambient | θJA | 37 | ℃/W | TJMAX=125℃, QFN4x4-24 package | 3 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | connects to the PGND pin at the negative terminal of the output capacitor COUT. Cover all unused areas on all layers with copper to reduce the temperature rise of the power element. These | 21 |
CAD (KiCad official)
- Symbol:
LGS53605A - Footprint:
Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm - 3D model: QFN-24(4x4) (KiCad packages3D, STEP)
- 3D model files:
lgs53605a-etched.step/lgs53605a-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lgs53605a.step/lgs53605a.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Legend-Si datasheet (25 pp, sha256
0f38c7e9b32cb0d3, retrieved 2026-10-29, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LGS53605A
**Legend-Si** · DC-DC Converters · QFN-24(4x4)
LGS53605A from Legend-Si, in a QFN-24(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RT | input | Oscillator frequency programming pin: connect an external resistor between 200k and 80k from RT to SGND to set 800kHz to 2MHz, keeping the set frequency within ±30% of an external clock for lock. |
| 2 | PHMODE | input | Phase selector input: tie to INTVCC for 2-phase operation, to SGND for 3-phase operation, and to INTVCC/2 for 4-phase operation. |
| 3 | MODE | input | Operation mode select: tie to INTVCC to force continuous synchronous operation at all loads, or to SGND to enable discontinuous mode at light loads; do not float this pin. |
| 4 | FB | input | Feedback input to the error amplifier, which compares the feedback voltage to the internal 0.6V reference, normally fed from a resistive divider from the output voltage. |
| 5 | TRACK/SS | input | Output tracking and soft-start pin: a voltage below 0.6V makes FB track this pin, and the internal 2.5µA pull-up from INTVCC with an external capacitor provides soft-start. |
| 6 | ITH | passive | Error amplifier output and switching regulator compensation point; the current comparator trip threshold is linearly proportional to this voltage. |
| 7 | EN | input | Regulator enable input, set high to enable the output; VIN undervoltage protection can be set with an external resistor divider. |
| 8 | PG | output | Open-drain power-good output that is pulled to ground when the FB voltage is not within ±10% of the internal 0.6V reference. |
| 9 | VON | input | On-time voltage input and trip point for the on-time comparator; tying it to VOUT makes on-time proportional to VOUT and keeps switching frequency constant. |
| 10 | PGND | power_in | Power ground and return path of the internal power MOSFETs; connect to the negative terminals of the input and output capacitors. |
| 11 | SW | output | Switch node connection to the external inductor; voltage swings from a diode drop below ground up to PVIN. |
| 12 | SW | output | Switch node connection to the external inductor; voltage swings from a diode drop below ground up to PVIN. |
| 13 | SW | output | Switch node connection to the external inductor; voltage swings from a diode drop below ground up to PVIN. |
| 14 | SW | output | Switch node connection to the external inductor; voltage swings from a diode drop below ground up to PVIN. |
| 15 | SW | output | Switch node connection to the external inductor; voltage swings from a diode drop below ground up to PVIN. |
| 16 | SW | output | Switch node connection to the external inductor; voltage swings from a diode drop below ground up to PVIN. |
| 17 | PVIN | power_in | Regulator power input; use a ceramic capacitor of 22µF or larger as close as possible between PVIN and PGND. |
| 18 | PVIN | power_in | Regulator power input; use a ceramic capacitor of 22µF or larger as close as possible between PVIN and PGND. |
| 19 | SVIN | power_in | Signal VIN, the filtered input to the on-chip 3.3V regulator; connect a 1Ω to 10Ω resistor between SVIN and PVIN and bypass to GND with a 0.1µF capacitor. |
| 20 | BST | power_out | Bootstrap drive supply; 100nF ceramic capacitors must be connected between BST and SW to bias the internal high-side gate driver. |
| 21 | INTVCC | power_out | Supply for the internal control circuit; a 1µF to 4.7µF ceramic decoupling capacitor must be connected between INTVCC and PGND, as close to the pin as possible. |
| 22 | SGND | power_in | Signal ground connection. |
| 23 | CLKOUT | output | Output clock for multiphase operation; its phase relative to CLKIN is set by PHMODE, and its peak-to-peak amplitude is INTVCC to GND. |
| 24 | CLKIN | input | External synchronization input to the phase detector, internally terminated to SGND with 20k; the PLL forces the top NMOS turn-on to synchronize with the CLKIN rising edge. |
| 25 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Legend-Si |
| Package | QFN-24(4x4) |
| Category | Power Supply Chip |
| Pins | 25 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| SVIN Input Voltage Range | SVIN | 4 | | 20 | V | | 6 |
| PVIN Input Voltage Range | PVIN | 0.9 | | 20 | V | | 6 |
| No-load input current | IQ | | | 600 | uA | Mode = 0, RT = 130k | 6 |
| Shutdown current | Isd | | | 11 | uA | VIN = 12V, EN = 0 | 6 |
| Feedback Reference Voltage | VFB | 0.594 | 0.6 | 0.606 | V | | 6 |
| Feedback Voltage Line Regulation | ΔVFB(LINE) | | 0.001 | 0.03 | % | VIN = 4V to 20V | 6 |
| Feedback Voltage Load Regulation | ΔVFB(LOAD) | | 0.1 | 0.3 | % | | 6 |
| Feedback Pin Input Current | IFB | | 10 | 100 | nA | | 6 |
| Error Amplifier Transconductance | gm(EA) | | 1.253 | 1.67 | mS | | 6 |
| Minimum On-Time | tON(MIN) | | | 50 | ns | | 6 |
| Minimum Off-Time | tOFF(MIN) | | | 130 | ns | | 6 |
| Positive Inductor Valley Current Limit | ILIM | | | 6 | A | | 6 |
| Negative Inductor Valley Current Limit | ILIM | -6 | | | A | | 6 |
| Top Power NMOS On-Resistance | RTOP | | 85 | 150 | mΩ | INTVCC = 3.3V | 6 |
| Bottom Power NMOS On-Resistance | RBOTTOM | | 42 | 60 | mΩ | INTVCC = 3.3V | 6 |
| INTVCC Undervoltage Lockout Threshold (rising) | VUVLO | | | 2.6 | V | INTVCC Rising | 6 |
| INTVCC Undervoltage Lockout Threshold (falling) | VUVLO | | | 2.8 | V | INTVCC Falling | 6 |
| EN Threshold 2 | VEN | | | 1.1 | V | IQ≥1mA, EN Rising | 6 |
| EN Threshold 1 | VEN | | | 0.5 | V | IQ≥100uA, EN Rising | 6 |
| INTVCC Internal VCC Voltage | INTVCC | | | 3.3 | V | 4V < VIN < 20V | 6 |
| INTVCC Load Regulation | ΔINTVCC | | | 0.3 | % | ILOAD = 0mA to 20mA | 6 |
| Output Overvoltage Threshold | OV | | | 110 | % | VFB Rising | 6 |
| Output Undervoltage Threshold | UV | | | 91 | % | VFB Falling | 6 |
| PGOOD Hysteresis | ΔVFB(HYS) | | | 1 | % | VFB Returning | 6 |
| PGOOD Pull-Down Resistance | RPG | | | 38 | Ω | | 6 |
| PGOOD Leakage | IPG | | | 2 | uA | 0.54V<VFB<0.66V | 7 |
| TRACK Pull-Up Current | ITRACK/SS | | 2.5 | 4 | uA | | 7 |
| Oscillator Frequency | fs | 0.8 | 1 | 2 | MHz | RT = 162kΩ | 7 |
| CLKIN Threshold VIL | CLKIN VIL | | | 0.3 | V | | 7 |
| CLKIN Threshold VIH | CLKIN VIH | 1 | | | V | | 7 |
| VIN Overvoltage Lockout Threshold (rising) | VVIN_OV | | | 23 | V | VIN Rising | 7 |
| VIN Overvoltage Lockout Threshold (falling) | VVIN_OV | | | 21 | V | VIN Falling | 7 |
| Pin to GND Voltage (PVIN, SVIN, SW, EN) | | -0.3 | | 22.5 | V | | 3 |
| Pin to GND Voltage (SW Transient) | | -2 | | 24.5 | V | SW transient | 3 |
| Pin to GND Voltage (BST) | | -0.3 | | | V | upper limit printed as PVIN+INTVCC | 3 |
| Pin to GND Voltage (VON) | | -0.3 | | | V | upper limit printed as SVIN | 3 |
| Pin to GND Voltage (INTVCC) | | -0.3 | | 3.6 | V | | 3 |
| Pin to GND Voltage (ITH, RT, PG, CLKIN, CLKOUT) | | -0.3 | | | V | upper limit printed as INTVCC | 3 |
| Pin to GND Voltage (PHMODE, MODE, TRACK/SS, FB) | | -0.3 | | | V | upper limit printed as INTVCC | 3 |
| Operating junction temperature | TJ | -40 | | 125 | ℃ | | 3 |
| Storage temperature | | -65 | | 150 | ℃ | | 3 |
| ESD value (HBM) | | -2 | | 2 | KV | HBM | 3 |
| ESD value (CDM) | | -1 | | 1 | KV | CDM | 3 |
| Thermal resistance, junction to ambient | θJA | | 37 | | ℃/W | TJMAX=125℃, QFN4x4-24 package | 3 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | | connects to the PGND pin at the negative terminal of the output capacitor COUT. Cover all unused areas on all layers with copper to reduce the temperature rise of the power element. These | 21 |
## CAD (KiCad official)
- Symbol: `LGS53605A`
- Footprint: `Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm`
- 3D model: QFN-24(4x4) (KiCad packages3D, STEP)
- 3D model files: `lgs53605a-etched.step` / `lgs53605a-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lgs53605a.step` / `lgs53605a.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Legend-Si datasheet](docs/lgs53605a-datasheet.pdf) (25 pp, sha256 `0f38c7e9b32cb0d3`, retrieved 2026-10-29, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lgs53605a-datasheet.pdf)