main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers lgs51065ep: viewers · Ray
lgs51065ep-etched.glb Publish 0.1.0 · Ray
lgs51065ep-etched.step lgs51065ep: factory component page (tier=lcsc) · Ray
lgs51065ep-hero.glb lgs51065ep: hero GLB from the etched model (keeps the MPN mark) · Ray
lgs51065ep-hero.overlay.json Publish 0.1.0 · Ray
lgs51065ep.glb Publish 0.1.0 · Ray
lgs51065ep.kicad_mod Publish 0.1.0 · Ray
lgs51065ep.kicad_sym Publish 0.1.0 · Ray
lgs51065ep.lbr Publish 0.1.0 · Ray
lgs51065ep.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 9 pins · Ray

LGS51065EP

Legend-Si · DC-DC Converters · ESOP-8

LGS51065EP from Legend-Si, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected Test pin, to be left floating.
2 EN input BUCK enable input that enables the step-down output when high and turns it off when low or left open; it is 3.3V logic level (high threshold 1.4V, low threshold 0.6V), so do not connect high voltage.
3 GND power_in Chip system ground.
4 VIN power_in Input voltage pin (recommended 12V to 65V) with an external input capacitor, not recommended to exceed 100uF.
5 SW output Internal power switch node connected to the external power inductor, Schottky diode and the CBST capacitor.
6 BST passive Power supply for the high-side gate drive; a high quality 100nF ceramic capacitor must be connected between BST and SW.
7 3V3 power_out LDO regulated fixed 3.3V output rated 10mA, requiring at least 2.2uF external capacitance to ground.
8 FB input Step-down feedback input with multi-mode adaptation: FB impedance to ground above 20K selects constant voltage mode (1V reference, resistor divider) and below 2K selects constant current mode (0.2V across the LED current sense resistor), latched once at power-up.
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Legend-Si
Package ESOP-8
Category Power Supply Chip
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Pin to GND voltage VI,SW VI,SW -0.3 65 V 3
Pin to GND voltage 3V3,E,FB 3V3,E,FB -0.3 6 V 3
Pin to GND voltage BST BST -0.3 V 3
Storage temperature Tstg -65 150 ℃ 3
Operating temperature -40 125 ℃ 3
ESD rating HBM -2000 2000 V 3
ESD rating CDM -1500 1500 V 3
ESD rating MM -200 200 V 3
Recommended input voltage range VI 12 65 V 4
Input undervoltage lock, rising edge VUVLO 12 13 V Rising edge 4
Input undervoltage lock, fall edge VUVLO 10 10.5 V Fall edge 4
Quiescent current IQ 65 μA E =0 4
BUCK module quiescent current IQ-BUCK 125 μA E =1, VI =24V, VOUT=5V 4
BUCK top tube RDS(ON) RDS(ON)BUCK_TOP 600 mΩ TJ=25℃ 4
FB feedback voltage, CV mode VFB.CV 1 V Voltage stabilized output mode 4
FB feedback voltage, CC mode VFB.CC 0.2 V Constant current output mode 4
Maximum duty cycle DMAX 85 % 4
Peak SW current limit ILIMT_SW 900 mA VI =48V 4
FB bias current IFB.BIASA 10 nA 4
LDO output voltage range VOUT.LDO 3.2 3.3 3.6 V 4
LDO output current IOUT.LDO 10 mA 4
LDO protective current limiting ILIMIT.LDO 15 mA Short to GND 4
Input I/O high logic threshold VI/O_H 1.4 V Pin E 4
Input I/O low logic threshold VI/O_L 0.6 V Pin E 4
Over temperature protection threshold TOTP-R 150 ℃ TJ Rising 4
Release of over temperature protection TOTP-F 130 ℃ TJ Falling 4

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper (PI 5) and G D (PI 2) pins to minimize high￾frequency noise. ■ For the high current path, use a large copper clad 20

CAD (KiCad official)

  • Symbol: LGS51065EP
  • Footprint: Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm
  • 3D model: ESOP-8 (KiCad packages3D, STEP)
  • 3D model files: lgs51065ep-etched.step / lgs51065ep-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lgs51065ep.step / lgs51065ep.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Legend-Si datasheet (22 pp, sha256 74742a5500784094, retrieved 2026-11-04, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF