main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs lf347dr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers lf347dr: viewers · Ray
lf347dr-etched.fit.json lf347dr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lf347dr-etched.glb lf347dr: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body wit… · Ray
lf347dr-etched.step lf347dr: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body wit… · Ray
lf347dr-hero.glb lf347dr: hero from the plain model · Ray
lf347dr-hero.overlay.json lf347dr: hero from the plain model · Ray
lf347dr.glb Publish 0.1.0 · Ray
lf347dr.kicad_mod Publish 0.1.0 · Ray
lf347dr.kicad_sym Publish 0.1.0 · Ray
lf347dr.lbr Publish 0.1.0 · Ray
lf347dr.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md lf347dr: one-pass backfill (citation: different_file, hero prebuilt (inputs unchanged)) · Ray

LF347DR

Texas Instruments · FET InputAmplifiers · SOIC-14

LF347DR from Texas Instruments, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 1OUT output Output pin of amplifier 1. Maximum peak output voltage swing ±13.5 V typical into RL = 10 kΩ.
2 1IN- input Inverting input pin of amplifier 1. JFET input with typical input bias current of 50 pA and input resistance of 10^12 Ω.
3 1IN+ input Noninverting input pin of amplifier 1. JFET input with typical input bias current of 50 pA and input resistance of 10^12 Ω.
4 VCC+ power_in Positive supply voltage. Recommended operating range 3.5 V to 18 V; absolute maximum 18 V. Typical supply current 8 mA.
5 2IN+ input Noninverting input pin of amplifier 2. JFET input with typical input bias current of 50 pA.
6 2IN- input Inverting input pin of amplifier 2. JFET input with typical input bias current of 50 pA.
7 2OUT output Output pin of amplifier 2. Maximum peak output voltage swing ±13.5 V typical into RL = 10 kΩ.
8 3OUT output Output pin of amplifier 3. Maximum peak output voltage swing ±13.5 V typical into RL = 10 kΩ.
9 3IN- input Inverting input pin of amplifier 3. JFET input with typical input bias current of 50 pA.
10 3IN+ input Noninverting input pin of amplifier 3. JFET input with typical input bias current of 50 pA.
11 VCC- power_in Negative supply voltage. Recommended operating range -3.5 V to -18 V; absolute maximum -18 V.
12 4IN+ input Noninverting input pin of amplifier 4. JFET input with typical input bias current of 50 pA.
13 4IN- input Inverting input pin of amplifier 4. JFET input with typical input bias current of 50 pA.
14 4OUT output Output pin of amplifier 4. Maximum peak output voltage swing ±13.5 V typical into RL = 10 kΩ.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-14
Category Op-amp/Cmp
Pins 14

Ordering variants

Same part, different packaging or reel option.

  • LF347DRD
  • LF347DRBD
  • LF347DRN
  • LF347DRBN

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input offset voltage VIO 5 10 mV VIC = 0, RS = 10 kΩ, 25°C 5
Input offset voltage VIO 13 mV VIC = 0, RS = 10 kΩ, full range (0°C to 70°C) 5
Input offset current IIO 25 100 pA VIC = 0, 25°C 5
Input offset current IIO 4 nA VIC = 0, 70°C 5
Input bias current IIB 50 200 pA VIC = 0, 25°C 5
Input bias current IIB 8 nA VIC = 0, 70°C 5
Common-mode input voltage, lower limit of range VICR -12 -11 V 5
Common-mode input voltage, upper limit of range VICR 11 15 V 5
Maximum peak output voltage swing VOM 12 13.5 V RL = 10 kΩ 5
Large signal differential voltage amplification AVD 25 100 V/mV VO = ±10 V, RL = 2 kΩ, 25°C 5
Large signal differential voltage amplification AVD 15 V/mV VO = ±10 V, RL = 2 kΩ, full range (0°C to 70°C) 5
Common-mode rejection ratio CMRR 70 100 dB RS ≤ 2 kΩ 5
Supply-voltage rejection ratio kSVR 70 100 dB 5
Supply current ICC 8 11 mA 5
Slew rate at unity gain SR 8 13 V/μs VI = 10 V, CL = 100 pF, RL = 2 kΩ, See Figure 5 (VCC± = ±15 V, TA = 25°C) 6
Supply voltage VCC+ VCC+ 18 V 4
Supply voltage VCC– VCC– -18 V 4
Differential input voltage VID -30 30 V 4
Input voltage VI -15 15 V 4
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds 260 °C 4
Operating virtual junction temperature TJ 150 °C 4
Storage temperature Tstg -65 150 °C 4
Free-air temperature TA 0 70 °C 4
Supply voltage VCC+ VCC+ 3.5 18 V 4
Supply voltage VCC– VCC– -3.5 -18 V 4
Operating temperature TA 0 70 °C 4
Junction-to-ambient thermal resistance (D, SOIC-14) RθJA 74.4 °C/W 4
Junction-to-case (top) thermal resistance (D, SOIC-14) RθJC(top) 32.5 °C/W 4
Junction-to-board thermal resistance (D, SOIC-14) RθJB 28.9 °C/W 4
Junction-to-top characterization parameter (D, SOIC-14) ψJT 3.7 °C/W 4
Junction-to-board characterization parameter (D, SOIC-14) ψJB 28.6 °C/W 4

CAD (KiCad official)

  • Symbol: LF347DR
  • Footprint: Package_SO:SOIC-14_3.9x8.7mm_P1.27mm
  • 3D model: SOIC-14 (KiCad packages3D, STEP)
  • 3D model files: lf347dr-etched.step / lf347dr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lf347dr.step / lf347dr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (22 pp, sha256 2ae820672c857470, retrieved 2026-08-17, tier: manufacturer) (the maker's link now serves a different file than the copy stored here)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF