main
Download ZIP Propose a change
Name Last commit message Last updated
docs aiflow run tile-parked-kimi-k3-20261002-0755: placement · John Lauer
layout.json Wall layout: 9 tiles corner-to-grid on the 576x576 scaffold, power star + I2C harness (wireBender shape) · John Lauer
package.json Rev B: 2-layer LED-field-only tile, 1580 LEDs, 3D render + architecture rewrite · John Lauer
page.json Use generic 3rd party fab wording · John Lauer
README.md Rev B: 2-layer LED-field-only tile, 1580 LEDs, 3D render + architecture rewrite · John Lauer

LED Grid Wall — own a pixel in the Adom workcell

A wall of 14,220 individually addressable mini RGB LEDs on a LrgLrg (576×576 mm) workcell scaffold: 9 identical tiles in a 3×3 grid, each tile carrying 1,580 Dialight 587-1024-147F 2020-package LEDs at 4 mm pitch. Every LED can be owned by a remote Adom user who sets its color anytime; a live camera in the workcell watches the wall, so a design emerges as users coordinate with each other.

Tile 3D layout — rev B (1,580 LEDs, 2-layer)

Tile rev B 3D render — top

Native KiCad 3D render of the current tile: 1,580 Dialight 587-1024-147F LEDs at 4 mm pitch in a contiguous 40×40 field, 4 gold corner machine-contact docking pads (V5×2 + GND×2) and 4 small signal machine pins along the bottom edge. No MCU strip, no back-side parts — the controller lives on its own board under the tile. F.Cu = V5 pour + data links, B.Cu = solid GND. 0 DRC errors. (The LED bodies render black here — the real part is clear epoxy; the 3D model color is being corrected.)

Architecture

  • Tile (this build's one board design): 160 × 160 mm, 2-layer, LED-field only — 1,580 LEDs in a 40×40 grid (16 docking cells + 4 signal-pin cells omitted). No MCU, no back-side parts. F.Cu is the V5 pour + WS2812 data links; B.Cu is a solid GND plane (GND via-in-pad per LED). Power enters through the 4 corner large machine contacts (V5×2 + GND×2, diagonal); the 4 chain data inputs enter through medium machine pins (tails down) at the chain starts.
  • Controller (separate small board, one per tile, mounted under the tile): RP2040 (4 parallel PIO-driven WS2812 chains, ~75 fps full-tile refresh), W25Q128 flash, 12 MHz crystal, AP2112K-3.3 rail, 74AHCT125 level shifter. I2C mesh between controllers; the master's USB-C is the wall's uplink to the workcell host. Machine pins rise into the tile's contacts above.
  • Scaffold: 3×3 tiles on the 576×576 LrgLrg scaffold; the LED fields of adjacent tiles align so the grid reads as one continuous canvas on camera.
  • Firmware: one UF2 for all controllers (Pico SDK, PIO + DMA, I2C mesh, global 20 A/tile power cap, dead-host watchdog); role from address straps. Host reference: host/tile_host.py maps (tile, row, col) → (chain, index). Deferred to a later stage per the 2026-10-01 review.
  • Ownership app: remote users claim and color LEDs from the Adom cloud; the workcell host relays frames to tiles over USB. Simulation available while boards are at the fab.

The LED

Dialight 587-1024-147F (Mouser 645-587-1024-147F): a 2.0 × 2.0 mm addressable RGB LED, WS2812-protocol compatible (800 kbps single-wire NRZ, 24-bit GRB), no external capacitor required, 5 mA per channel. Chosen as the densest Mouser-stocked addressable LED — the Worldsemi WS2812B-2020 (Adom basic part) is the same density class but was out of stock everywhere at design time. Component page: adom/587-1024-147f.

Build record

Document Contents
docs/plan/DECISIONS.md Locked design decisions + power budget
docs/plan/COMPONENTS.md Component → wiki page register
docs/plan/GENERATOR-SPEC.md The board generator's engineering spec

Status

In design. Tile PCB authored by generator + AI Flow run (native KiCad placement/routing/pours landed live and recorded). Gerbers target the 3rd party fab 300×380 mm panel (2 tiles per panel).